ANALOG DEVICE Precision Low Power Signal Chains User Guide

June 4, 2024
ANALOG DEVICE

ANALOG DEVICE Precision Low Power Signal Chains

This document is interactive. You can click on any underlined text to navigate through the document.

For the resources

For the individual pages

Precision Low Power

ANALOG DEVICE Precision Low Power Signal Chains-fig4 ANALOG DEVICE Precision Low Power Signal Chains-
fig5 ANALOG DEVICE Precision Low Power Signal
Chains-fig6 ANALOG DEVICE Precision Low
Power Signal Chains-fig7

PART # DESCRIPTION

MAX77642| Ultra Configurable PMIC Featuring 93% Peak Efficiency Single-Inductor, 3-Output Buck-Boost, 1-LDO for Long Battery Life
MAX17220| 400mV to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown
MAX17530| 4V to 42V, 25mA, Ultra-Small, High-Efficiency, Synchronous Step-Down DC-DC Converter with 22µA No-Load Supply Current
ADP150| Ultralow Noise, 150 mA CMOS Linear Regulator
ADuM5028| Low Emission Isolated DC to DC Converter

POWER REQUIREMENTS


PARAMETER

| STAGES| Amplifier| ADC| Reference| Isolation
---|---|---|---|---|---
Part #| AD8237| AD4001| ADR3425| ADuM1441
Pin| +VS| -VS| VDD| VIO| IN| VDD1| VDD2
Supply Voltage| V| 3.3| –| 1.8| 1.8 (or 3.3)| 3.3| 3.3| 3.3
Supply Current| mA| 0.15| –| 5.3| 0.555| 0.1| 0.9| 0.9
PSRR| dB| 73 (100Hz)| 55 (750kHz)| 54 (100kHz)| –

  • Note 1:
    The supply currents indicated are the maximum quiescent current of the supply rails. For overall full load or short circuit c curr ent
    specifications, refer to the datasheets of the signal chain components.

  • Note 2:
    The supply voltages indicated are the values for typical applications.

  • Note 3:
    Consult the corresponding datasheets for details on power dissipation if needed.

  • Note 4:
    The actual supply current requirement shall be multiplied depending on the number of channels on the signal chain.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals