INSIGNIA NS-IOPS22 2-Way Indoor Outdoor Speakers User Guide
- June 4, 2024
- Insignia
Table of Contents
QUICK SETUP GUIDE
2-Way Indoor/Outdoor Speakers
NS-IOPS22 / NS-IOPS22-C PACKAGE CONTENTS
PACKAGE CONTENTS
- 2-way indoor/outdoor multipurpose speakers (2)
- Adhesive-backed cushioned feet for speakers (8)
- Wall-mount brackets (2)
- Adhesive-backed cushions for mounting brackets (4)
- Screws (4)
- Knobs (4) (for wall mounting)
- Quick Setup Guide
FEATURES
- Weather resistant for versatile use inside or outside
- Includes mounting brackets and hardware for easy installation
- Each speaker features one 4″ polypropylene woofer cone and one 1/2″ Mylar tweeter
CONNECTING YOUR SPEAKERS
Your speakers can be connected to an amplifier, receiver, or similar device. That device can be connected to your source devices, such as a TV or turntable, to produce sound.
Note: We recommend using 18-gauge or heavier speaker wire.
- Connect the red (+) speaker terminals to the red (+) amplifier terminals.
- Connect the black (-) speaker terminals to the black (-) amplifier terminals.
See the documentation that came with your amplifier or home theater system for
more information on connecting the cables.
Note: All two-conductor wire is marked with a colored stripe, raised
rib, a different color, or some other indicator to help with making
connections. Use the marked wire for the red (+) connections.
You can position your speakers free-standing, or mount them to a wall.
POSITIONING YOUR SPEAKERS (OPTIONAL)
Note: If you are installing your speakers outdoors, select locations facing your listening area that are protected from rain and snow, and are out of direct sunlight.
- If not using the wall-mount brackets, attach the adhesive-backed cushioned feet to the base of the speakers.
- Locate your speakers with enough distance between them to provide adequate left and right stereo separation (for optimum results, also make sure that the left channel speaker is on the left side and the right channel speaker is on the right).
INSTALLING WALL-MOUNT BRACKETS (OPTIONAL)
- Screw the wall-mount brackets onto the wall where you want to mount the speakers. If the location is backed by wooden wall studs, you can use wood screws (not included). If the location is backed by only drywall, concrete, or other wall types, use wall anchors (not included).
- Attach the adhesive-backed cushions to the brackets.
- Slide a speaker into each mounting bracket.
- Line up the screw holes (one on top, one on bottom), then screw a knob into each hole to secure the speaker to the bracket. You can loosen the knobs to adjust the direction the speakers are pointing.
TROUBLESHOOTING
No sound or low volume
- Make sure that all connections are tight and secure.
- Make sure that your speakers are connected to an amplifier or audio receiver.
- Make sure that your amplifier or an audio receiver is connected to a source device such as a TV or turntable.
- Make sure that your sound source device is not muted or turn the volume up.
Sound is distorted
- Try moving the speakers away from other devices or cables. Sound is coming from one speaker only
- Adjust the sound balance on your source device.
SAFETY INFORMATION
- Never set the volume above the point of audio distortion or you could damage your speakers very quickly.
- If you hear distortion, immediately turn down the volume.
If you do not, the resulting damage is not covered by the warranty.
SPECIFICATIONS
- Each speaker dimension (H × W × D) (without bracket): 7.4 × 4.7 × 4.1 in. (18.7 × 11.8 × 10.5 cm)
- Each speaker dimension (H × W × D) (with bracket): 8.3 × 4.7 × 6.1 in. (21 × 11.8 × 15.5 cm)
- Each speaker’s net weight (without bracket): 2.2 lbs (1 kg)
- Each speaker’s net weight (with bracket): 2.4 lbs (1.1 kg)
- 8-ohm nominal impedance
- 90 Hz – 20 kHz frequency response
- RMS power: 15 W × 2
- P eak power : 30 W × 2
Notes:
- Peak power refers to manufacturing testing standards and methods.
- Design and specifications are subject to change without notice.
- Operating temperature range: -40 °F~122 °F (-40 °C~+50 °C)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2022 Best Buy. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>