Shenzhen Taiyang Technology Co Ltd K35 Smart Watch User Manual

K35 Smart Watch
User Manual

PLEASE READ THE USER MANUAL BEFORE USE

Instruction

When using the watch for the first time,please ensure that the watch has enough power. If the watch cannot be powered on due to low power,please charge it for about 2 hours. After charging,the watch will turn on automatically.

Component Introduction

Charging

Before using the watch.please ensure that the watch has enough power, and automatically attach the magnetic cable to the charging position of the watch, which can be seen in the picture.

Download the “Glory Fit” APP

Android terminal: in my app Search for “Glory Fit” to download.
IOS terminal: Search for “Glory Fit” in the app store to download. Or scan the QR code to download.

https://app.uteasy.com/download/gloryfit.html

How to operate

Press the button to wake up the screen

1. Screen swipe left: Select functional options including exercise data, heart rate, blood oxygen, sleep, music, voice assistant, weather, and gaming.
2. Swipe screen to the right: enter menu mode
3. Swipe down the screen: sound settings, more settings, menu tools, undisturbed mode, Bluetooth settings, brightness adjustment
4. Slide up the screen: display information.
   B: “Long press the screen” on the watch.
   After the dial becomes smaller, slide the screen left or rig ht to change the dial.

Key features

1. You can press a button to return, or long press to turn off and on the power. When double clicking the button to select a function option, the main dial will display and swipe the selected functions on the screen, such as exercise, exercise, SOS, etc Call, heart rate, sleep, blood oxygen, weather, music, information, alarm clock, stress, emotions, respiratory rate, breathing training, gaming, voice assistant, hand up screen, UV, medication reminder, more, settings.
2. Next click to open sports mode

Q&A

The watch cannot be turned on
Hold down the power button for more than 3 seconds.
Sometimes it is the battery that may have low power. The watch cannot be turned on. So charge it in time.

Bluetooth is disconnected or unavailable

1. Restart the watch and connect it again.
2. Please restart the bluetooth of the mobile phone and connect it again.
3. Do not connect your phone to other

Incorrect heart rate/blood oxygen measur ement

1. The most common cause is poor contact between the watch sensor and the body.
2. When measuring, please make sure that the sensor is in complete contact with the wrist.
3. Due to the possibility of errors in testing individuals with different skin colors, it is necessary to test multiple times for calibration
   Sleep data is not accurate enough

Sleeping data are not accurate enough

1. Sleeping monitoring is to simulate the natural state of falling asleep and getting up. When you use this function, you should wear the watch normally.
2. Wear it when you fall asleep too late or begin to sleep, which may cause errors.
3. Sleep data is not monitored during the day, and the sleep monitoring time is from 9:30 PM to the next day at noon 12:00.
   For more common questions, please refer to the app [My]>[Frequently Asked Questions].

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>