METAN 5 Gun Rifle Safe with Quick Access Keypad Lock Instruction Manual
- June 4, 2024
- METAN
Table of Contents
Instruction Manual
Parts List
Tips
- Do not lock the emergency keys or data cable into the cabinet
- If the gun safe will not be used for a long time,please remove the battery.
- Purchase 4 AA batteries advance, this gun safe does not contain batteries.
System Setting
-
Open the gun safe for the first time
Take the emergency key out of the bag and push the keyhole cover, then put the key and turn it anticlockwise, turn the handle clockwise to open the cabinet. -
Insert the battery
Remove the internal battery box cover and install 4 AA 1.5 Volt alkaline batteries, the system will power on.
Password Setting
-
Personal Password Setting
• When the door is open press A (upward side) on the inside of the door, the left light and right light will light up alternately. Enter a new password with 3 to 8 digits,and press “#” to confirm,a long beep will sound.Enter the new password again and press “#” to confirm,a long beep will sound, indicating the password has been successfully set.
• If it beeps three times, indicating that two passwords are not the same and the setting fails. -
Management Password Setting
• Press 00 and press A on the inside of the door the left light and right light will light up alternately.Enter a new password with 3 to 8 digits,and press “#” to confirm,a long beep will sound.Enter the new password again and press “#” to confirm,a long beep will sound, indicating the password has been successfully set.
• If it beeps three times, indicating that two passwords are not the same and the setting fails. -
Silent mode
• Press 1 for 3 seconds and the left light will light up and it enters silent mode.
• Press “1” for 3 seconds again,and the left light will light up and a long beep will sound,silent mode ends. -
Unlock the Door
• Enter the correct password and press “#” to confirm,and it will beep many times and the left light will light up, indicating it’s unlocked.
• If it beeps twice and the right light lights up, indicating the password is incorrect.
• If the password is entered incorrectly three times consecutively, an automatic alarm will sound for 60 seconds. -
Vibration Alarm
• To set the alarm, press 9 for 3 seconds a long beep sound and the left light will light up, indicating it enters alarm mode.
If the gun safe is vibrated, the built-in alarm will sound for 60 seconds.
• To relieve the alarm,enter the correct password,and press “#” to unlock the door and relieve the alarm.
• Each time the door is unlocked, the alarm will be relieved, you need to set the alarm again to start it. -
Undervoltage Indication
• The cabinet needs four 5th AA alkaline batteries.
• When the battery voltage is low,when it’s unlock, it will beep five times to indicate that the batteries need to be replaced as soon as possible.
• If the battery power is too low, the data cable can be used to unlock,or just use the key to unlock.
Mount the Safe
- To reduce the risk of the safe being stolen it can be secured to floor,wall or in a cupboard. For your convenience, there are 4 holes on the back and 2 holes in the bottom of the safe, therefore it can be fixed by the expansion bolts supplied.
Note: Please make sure to mount the gun cabinet on the wall or floor otherwise it may fall over and threaten your safety.
GUN SAFE
IMPORTANT
- Tip over hazard: Secure the cabinet! The cabinet can be tipped over by children or adults, please make sure the cabinet is mounted on the wall or floor.
- Keep the keys in a secure place away from children.
- Do not move this cabinet using its handle.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>