Mpow Bluetooth Music Receiver User Manual

: June 2, 2024
: MPow

Table of Contents

Specifications:
Product Diagram
Instruction
Charging the receiver
Low-Voltage alert:
Power on/off the receiver
Pair to your phone
Read User Manual Online (PDF format)
Download This Manual (PDF format)

USER MANUAL

Mpow Bluetooth Music Receiver

Specifications:

B1uetooth Version: V4.0
Frequency Range: 2.4GHz
Operation: Class2
Bluetooth Mode: HFP/HSP/A2DP/AVRCP
B1uetooth Range: up to 30 feet
Charge time: 1.5 hours
Playing time: up to 1O hours

Product Diagram

Multifunction Button
Next Song / Volume Up
Previous Song / Volume Down
Charge Port
Indicator

Instruction

Connect the receiver to your home stereo system or car stereo system via the 3.5mm audio cable/ adapter
Pair the receiver to your phone
Now you can enjoy your music through the home stereo system or car stereo system

Remark:
If you want to use it in the car stereo system, you need to adjust the car radio to AUX in.

Charging the receiver

You must charge the receiver fully before using the receiver for the first time.

Connect the USB charging cable to the USB charge port of the receiver.
The light indicator will turn into red when charging.
11ae full charge takes about 1.5 hours.
The red light indicator goes out when charging completed.

Low-Voltage alert:

When the alert tone sounds every minute and the indicator light toms into red indicate that the battery has my out, need to charge as soon as possible.

Power on/off the receiver

Power on: Press the multifunction button about 3 seconds until the blue and red indicator lights start flashing alternately
Power off: Press the multifunction button for about 3 seconds until the blue indicator light goes off.

Pair to your phone

Before using the receiver for the first time, you must pair it with your phone.
Press the multifunction button for about 3 seconds until the blue and red lights start flashing alternately.
Turn on the Bluetooth function of your phone.
Search for the Bluetooth devices and select “MPOW”
Enter the code “0000” if needed.
If paring is successful, the blue indicator light flash slowly.

Remark: L It will come& to the last connected phone automatically when it duns on. (Please make sure the Bluetooth function of your phone is on before turn on the receiver.)

Connect two Bluetooth devices at the same time

I. Pair the Bluetooth receiver to the first phone.

After pair successfully, tour off the Bluetooth function of the first phone.
It will enter pairing mode again.
Pair the Bluetooth receiver to the second phone.
After pair successfully, turn off the Bluetooth motion of the second phone.
Tam on the Bluetooth function of the fest phone. Select the “NIPOW. and click “connect”.
Turn on the Bluetooth function of the second phone. Select the “MPOW. and click “connect”. S. Two plumes will both connect the Bluetooth receiver at the same time.

Remark:
If you want to switch different phone to listen music, please pause the =isle of the first phone, and then play the music on the second phone, it will switch to the music of the second phone after a few seconds.

Answering a call
For iPhone users,

Selection 1. Press the multifunction button.
Selection 2. Press the “Answer” button of your iPhone and check your iPhone call menu. Look for the audio source and select the ” MPOW “.

For Android User (such as Samsung, HTC, Sony etc. ),
Selection 1. Press the multifunction button.
Selection 2. Press the “Answer” button of your phone.

Ending a call
Press the multifunction button.

Rejecting a call
Press the multifunction button until you hear the sound “toot” and then release.

Redialing the last called number
Double press the multifunction button.

Playing music
When you are listening to the music, you can press the buttons “Play, Pause, Previous Song, Next song” to select your optimal performance and control the volume.