Mpow ISNAP X1 Selfie Stick User Manual PA168A

USER MANUAL

Selfie Stick
Mpow ISNAP X1 / PA168A

Packing

Diagram

1. Fill Light
2. Phone Holder
3. Adjusting Knob
4. l/4″ Screw for GoPro or camera
5. Remote Control
6. Handle
7. Stable Tripod Stand

Pairing

Long press the camera key for 2s until the blue light flashes. Turn on the wireless function on your phone and select “Mpow isnap x1 ” the blue light stays on if paired successfully.

Tips : Tum off: Long press the camera key for another 3s to turn it off.

Step-1.

Loosen the knob and adjust the angle up and down. After adjusting the angle. tighren the knob and put your phone on. (Vertical or Horizontal)

Step-2.

The tripod is located in the handle slot open it outwards when in use. After unfolding the tripod, push the locking device

Step-3.

The remote control is connected to the mobile phone, and the effective distance of the remote control is up to 10 meters/33 feet

Tips

1. The remote control will automatically sleep after 5-10mins if without any operation. just click the camera key to wake it up.
2. The remote control will automatically off after 30mins if without any operation, and you need to press the camera key for 2 seconds to tum it on

How to Use the Fill Light?

How ID Install a camera or GoPro on the Tripod?

For camera

For GoPro

How to install a cameras or GoPro on the tripod

Step-1.
Adjust the l /4″ screw to the right position with the adjusting knob

Step-2.
Connect the l /4″ screw to the screw thread at the bottom of the camera/GoPro connector and then tighten it

Mpow-ISNAP-X1-Selfie-Stick-PA168A-Manual-OptimizedOptimized PDF

Mpow-ISNAP-X1-Selfie-Stick-PA168A-Manual-OriginalDownload

Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>