59S UVC LED Sterilizing Lid User Manual

USER MANUAL

59S UVC LED Sterilizing Lid
Sharper Image

PACKING LIST

1. Stylizing Lid  *1
2. User Manual *1
3. USE Cable  *1
4. Sterilization Teat Report *1

INTRODUCTION

This is a sterilizing lid with features of extremely convenience, portable, easy to use and high sterilization rate. It’s compatible with two modes: 59 seconds fast sterilize and 180 seconds strong sterilize, just one-click to achieve 99.9% sterilization rate.

1. Sterilizing Button
2. LED Indicator
3. Silicon Slot
4. UV LED Beads
5. Toggle Switch
6. Input Interface

HOW TO USE

1. Please fully charge the device with compliance adaptor(Output: 5V= 14).

2. Slide the toggle switch onto 59S (fast sterilize ( or 180S ( strong sterilize).

3. Place the sterilizing lid on the top of  items, such as bowl, spoon, cup, and tableware, etc. Double click the sterilizing button to start sterilizing, the LED ring keeps flickering.

Note: The silicon slot is designed to get spoon, toothbrush inserted for sterilization, and block the UVC light.

4. After sterilization finished, restore the toggle switch to “OFF.

5. Click the sterilizing button once to stop working instantly during sterilization.

APPLICATION

Sterilization for any of surfaces, such as bowl, folk, cup and tableware, etc.

SAFETY PROTECTION

Built-in gravity sensor, the UVC LED light shuts down instantly once turning over. (Shake to hear the noise made by gravity sensor.)

STERILIZATION PRINCIPLE

UVC LED light kills bacteria by destroying DNA or RNA, to stop them from reproducing and generating.

UVC LED DEODORIZATION

UVC waves can deodorize by decomposing the molecular structure of odor.

INTRODUCTION OF BACTERICIDAL FACTORS AND MICROORGANISM CATEGORIES

The main bactericidal factor and its intensity: UVC light, the average irradiance at a vertical distance of 0 cm and 10cm below the top UVC LED is respectively 1310 uW/cm’ and 23 uW/cm2; killing microorganisms: Escherichia coli, Staphylococcus aureus.

INDICATOR STATEMENT

Notice: When the toggle switch stays at 593/1803 without any operation in 3 minutes, the lid will turn off automatically to enter into sleeping mode. The device will enter into Standby mode as soon as clicking sterilization button or turning over .

TECHNICAL PARAMETERS

1. Product Name: 59S@SZQ5-S8BAT UVC LED STERILIZING LID
2. Model: SZQ5-S8BAT
3. LED Beads: 5 pieces
4. Dimension:163.65120X11.8mm
5. Net Weight: 99g
6. Wavelength: 260-280nm
7. Power Supply Interface: Micro USB
8. Input: 5V= 1A
9. Battery Specification: Battery Type: Lithium;  Battery Capacity 1100mAh;  Battery Voltage: 3 7V;  Battery Charging Voltage Limitation: 4.2V
10. LED Life spar, Up to 10,000 hours
11.  Temperature: Working Temperature: 0-30°C Storage Temperature: -20-555

WARM TIPS

1. Please use 5V=1A adaptor to charge the device, otherwise it will get damaged.
2. Fully charge the sterilizing lid before using.
3. When the tool switch stays at 59S or 180S without operation in 3 mins, the LED ring will go off and enter into sleeping mode automatically. The device will enter into Standby mode as soon as clicking sterilization button or turning over.
4. Keep operation away from strong magnetic field objects.
5. Please apply the 180S mode for deodorization, repeat ng sterilization cycle as needed for better performance.
6. Study the manual carefully and thoroughly, keep it properly.

• In order to Improve user experience, There will be changes in product features without prior  written notice, please refer to actual content in the Package.

1. CHILDREN PROHIBITED
2.  NOT EXPOSE TO ETES NSKIN
3. DO NO TRAMPLING
4. NO WASHING &SOAKING

NAME AND CONCENTRATION OF HARMFUL SUBSTANCE OR ELEMENTS

O: It means that the concentration of the toxic and harmful substance M all homogeneous materials of the component is compliance with the limitation stipulated in GB/26572-2011.

X: The concentration of the to>, and hazardous substances in certain homogeneous material of the component exceeds the limitation specified in GB/26572-2011.

Note: Components marked “X’ stands for no alternative technologies or components available at this stage.

The EFUP refers to the safety lifespan of using the product without hazardous material leakage under the conditions specified in the manual.

• For the battery: 5 years EFUP under normal use conditions
• For the product: 10 years EFUP under normal use conditions

Warranty Details

Thank you for purchasing our product. In order to offer you good experience and protect your rights, we provide after-sales service in accordance with regulations & requirements by Mil and AQSICI.

The following circumstances are not covered by warranty:

• Warranty expires.
• Malfunction or damage resulted from failure to use, maintain or keep the machine as instructed by the User Manual.
• Disassemble the machine by customers without permission.
• Malfunction or damage caused by human errors such as misuse, collision or wrong voltage input).

Product Model:__Date of purchase:___

Dealer:____User name:_____

Phone number:____

User address:____

• This voucher serves as an important evidence to resort for after-sales service and shall be kept properly.

Manufacturer: Shenzhen UVLED Optical Technology Co., Ltd.

Address: Room 301, FL 3, Phase 1, Bangkai Science and Technology Park, West of Bangkai Road & South of Guanguang Road, Guangming Hi-Tech Industrial Zone, Tangka Community, Phoenix Street Admin, Guangming District, Shenzhen, China

Commissioned Manufacturer: Shenzhen UV Guard Technology Co., Ltd. Factory Address: 3-4/F, Building 2A, No.9, Bangkai Road, High-tech Industrial Park, Guangming District, Shenzhen, China

Hygienic License: VWXZZ(2018)-02-No.9142

Service Tel: 400-930-7399 Post Code: 518132

Executive Standard: Q/YCHC 002

https,//www.59s.comien/

59S-UVC-LED-Sterilizing-Lid-Manual-Optimized

59S-UVC-LED-Sterilizing-Lid-Manual-Original

Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>