MPOW X5 / Flame Solo User Manual

MPOWX5 TRUE WIRELESS EARBUDS MODEL: BH464A

PACKING LIST

DIAGRAM

POWER ON

Mode 1 (Auto)

Mode 2 (Manual)

1. The earphones automatically turn on (with blue LED light flashing) and start pairing when they are taken out from the charging case.
2. In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on (with the blue LED light flashing).

POWER OFF

Mode 1 (Auto)

Mode 2 (Manual)

1. Put the, earphones back in the charging case, and they’ll shutdown automatically.
2.  If the earphones are not in the charging case.just press and hold the MFB of both earbuds for 5 seconds to power then off. (Mode 2 cannot be conducted during music playing or calling).

MUSIC

INCOMING CALL

ACTIVATE SIRI

ANC MODE

Twin mode: press and hold the Left (L) earbud for 2 seconds to switch the noise-control modes among 3 choices: ANC On, Ambient Mode and ANC Off.
Note: the Left (L) mono or Right (R) mono mode does not support ANC.

FAQ ABOUT ANC TECHNOLOGY

• How to experience the ANC effect correctly?
  If you are eager to experience the ANC effect when you receive this product, you can do as follow:
  When you are at home or indoors, you can turn on your air conditioner’s cool or fan mode, and then wear Mpow X5 both earbuds without music playing next turn on and off ANC for 2-3 times. you will find the noise difference between ANC on and off.
  When you are outdoors you can stand on the roadside, and then wear Mpow X5 both earbuds without music playing next turn on and off ANC for 2-3 times next carefully listen to the noise When cars or trucks are passing by, you will feel the noticeable noise difference  between ANC on and off

• Is ANC valid when i’m using earbuds to take a phone call?
  Mpow X5 has noise reduction when you are having phone call What is worth mentioning noise cancelling technology used on phone calls is different from ANC (Active Noise Cancellation) technology they are used for different scenarios. Mpow X5 adopts ANC technology to effectively cancel low-frequency harmful noise.

• Is ANC build when i wear only one earbud?
  NO it isn’t ANC is only valid in binaural mode.

• Why is not the noise canceling effect very signigicant?
  1. Choose the perfect site of ear tips which fit your ear canals
  2. Give the earbuds a slight twist to snugly lock them in your ear canals.
  3. Experience ANC effect without music playing when you are in noise place.

RESET

1. Make sure Bluetooth is turned off in your device.
2. Take both earbuds from the charging case (make sure the earbuds are In the paring mode In which LED flashes red and blue).
3. Tap both earbuds 4 limes,
4. The earbud’s light WI I flash red and blue simultaneously. which means successful resetting.

CHARGING

MPOW X5 / Flame Solo User Manual – Optimized PDF
MPOW X5 / Flame Solo User Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>