Pet Life 209540 Electric Heating and Cooling Smart Pet Bed User Manual
- June 1, 2024
- Pet Life
Table of Contents
Pet bed instruction
209540 Electric Heating and Cooling Smart Pet Bed
For saving the packing volume, the product put into the box as reverse, please turn back to opposite as below steps:
- Reverse pet bed
- Pull one of the corners by hand
- Pull to the opposite side
- Pull other corner to back
- Pull 3rd corner to back
- Pull the last corner to back
- The front side product picture
How to operate of the function as below steps:
|
---|---
DC Jack| Switch power supplier
- Plug the Switch supplier DC Jack into to DC Jack of pet bed, like as below picture:
- Press the button, the LED light blue, the fan is on, start to Cooling mode.
- Press the button again, the LED changes from blue to red, go into the heating mode and stop cooling mode, and then take out the heating pad as below pictures:
Open the zipper and remove the heating pad from the pocket 
Smooth out the heating pad, put the heating pad Velcro Hook side on the pet body Velcro loop side. 
The temperature of heating pad will go up, when the internal temperature rises to about 122 Fahrenheit it is stabilized and doesn’t rise again. When we are not heating, pull the pad back to the pocket and close the zipper. - Press the
button again, the LED changes from red to green, and go into auxiliary-Ozone mode, the wind blows out carry with Ozone to help clean the bacteria from pets or clean bacteria for itself. - Press the button again, the LED is off and all the functions are off.
- Both side of pet bed have luminous function at night to prevent the people from kicking it, like below pictures:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>