iBEAM TE-50VS 5 Inch Color Video Monitor Instruction Manual
- June 1, 2024
- iBEAM
Table of Contents
iBEAM TE-50VS 5 Inch Color Video Monitor
Product Information
- 5-color video screen that can be mounted on the window (with supplied suction cup mount) or dash (with supplied mounting base with 3M tape)
- Connect the RED wire to the +12 volt accessory wire
- Connect the BLACK wire to the ground (a metal, non-painted surface)
- Plug a video cable from any source with a composite video output into either of the video inputs of the video screen. The video screen will automatically turn on when it detects a video source and it turn off when that video source stops.
- To adjust settings such as colour, contrast, brightness, language and screen ratio use the middle button on the back to scroll through settings and use the top and bottom buttons to select.
FAQ
- Q: How do I mount the video screen?
- A: You can mount the screen on the window using the supplied suction cup mount or on the dash using the supplied mounting base with 3M tape.
- Q: How do I adjust the settings on the video screen?
- A: To adjust settings such as colour, contrast, brightness, language, and screen ratio, use the middle button on the back to scroll through settings and use the top and bottom buttons to select.
Specifications
- Display: 5.0 (16:9)
- Power: ≤3W
- Power Supply: DC 12V
- Pixel: 480(W)RGB272(H)
- Contrast: 350:1
- PAL / NTSC compatible
- AV signal auto detects power on/off
- Auto switch when reversing 2 ways AV input
- Compact size & easy installation
Installation
- 5” colour video screen that can be mounted on the window (with supplied suction cup mount) or a dash (with supplied mounting base with 3M tape)
- Connect the RED wire to the +12 volt accessory wire
- Connect the BLACK wire to the ground (a metal, non-painted surface)
- Plug a video cable from any source with a composite video output into either of the video inputs of the video screen. The video screen will automatically turn on when it detects a video source and it turn off when that video source stops.
- To adjust settings such as colour, contrast, brightness, language and screen ratio use the middle button on the back to scroll through settings and use the top and bottom buttons to select.
NOTE: If the video screen is used with a backup camera use AV2 input (this will allow for automatic triggering when the vehicle is placed in reverse and will override the AV1 input) the video screen has a built-in shade on top, this is how the screen should be mounted.
CONTACT
- 800.221.0932
- iBeamUSA.com
- 460 Walker Street, Holly Hill, FL 32117
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>