QAZQA 95904 Kansas HL Rural Hanging Lamp Instruction Manual
- June 1, 2024
- QAZQA
Table of Contents
QAZQA 95904 Kansas HL Rural Hanging Lamp
Product Information
Specifications:
- Model: Kansas HL 95904 / 106825 / 107710 / 107712
- Input: IP44 220-240V~, 50Hz
- Socket Type: E27
- Max Wattage: 60W
Product Usage Instructions
Installation:
- Ensure the power supply is switched off before installation.
- Identify the incoming supply wires: LIVE (Brown or Red), EARTH (Green & Yellow), NEUTRAL (Blue or Black).
- Locate the appropriate connections on the fitting for LIVE, EARTH, and NEUTRAL wires.
- Connect the wires as follows: LIVE to LIVE, EARTH to EARTH, and NEUTRAL to NEUTRAL.
- Securely fasten the connections and ensure they are insulated properly.
Usage:
- Once installed, switch on the power supply.
- The overall size of the product is 875mm.
- For any issues or inquiries, refer to the manufacturer’s contact information provided below.
Contact Information:
FittinQ B.V. – Smaragdweg 52, 5527 LB Hapert, The Netherlands – Website:
www.qazqa.nl
FittinQ LTD – 55 Baker Street, London, W1U 7EU United Kingdom
FAQ:
Q: What should I do if the light fixture is not working after installation?
A: Check the connections to ensure they are secure and correct. If the issue
persists, contact customer support for further assistance.
SAFETY PRECAUTION
INSTALLATION
Overall Sizes
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on ell electrical components
- Take account of all available technical information.
- Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Closs I: the fitting must be earthed
- Protection Class II: the fitting is doubled insulated and does not require earthing
- Protection Closs Ill: the fitting is low-voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltages.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed bywoll switch
- The reference light angle and light space of the luminaire
-
This luminaire cannot be disposed of together with normal domestic waste in standard rubbish con, but you have to bring it to a staging area for electrical waste
Take note of the symbols when connecting wires:
- Live conductor
- Earth conductor
- Neutral Conducteur conductor
FittinQ B.V. Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl
FittinQ LTD 55 Baker Street, London, W1U 7EU United Kingdom