FATFISH F16 Multi Protocol Radio System User Guide
- June 1, 2024
- FATFISH
Table of Contents
F16
Quick start guide
WWW.FATFISHFPV.COM
Introduction
The best just got better
Thank you for purchasing the FATFISH F16 Multi-protocol radio system. FATFISH
is proud to bring this ground-breaking product to the market and would like to
thank customers just like you and the community for making this dream
possible. The F16 version has had several improvements thanks to feedback from
users like you. Please take a moment to read this quick start reference before
using your new F16 radio.
Safety & Precautions.
Many radio control models are equipped with powerful motors and sharp spinning
propellers. Please exercise caution when working on modets. Ensure power is
disconnected from your models and remove propellers when performing
maintenance.
Do not operate the F16 radio system under the follow conditions.
- During bad weather or high wind conditions such as rain, hail, snow, storms or electromagnetic events.
- Under limited visibility.
- In areas where people, property, powerlines, roads, vehicles or animals may be in present.
- If you are feeling tired or unwell or under the influence of drugs or alcohol.
- If the radio or model appear to be damaged or not functioning correctly.
- In areas of high 2.4GHz interference or in locations where use of 2.4GHz radios is prohibited.
- When the battery in the F16 or the model is too low to function.
Manuals and firmware downloads.
The F16 is shipped with EdgeTX software installed as standard. To download the
latest software and manual
please visit https://www.fatfishfpy.com
Further firmware information.
EdgeTX: http://edgetx.org
ExpressLRS: https://www.expressirs.org/3.0/
Multi Protocol Module: https://www.multi-module.org/
CAUTION!
The F16 is shipped with the most stable firmware at the time of manufacture.
Please onty update firmware if you are experienced and confident in updating
system firmware. Incorrect updates may render the radio inoperable.
DO NOT charge 6.6v LiFE battery packs or Li-ion 18650 cells with nominal
voltage of 3.6v. Incorrectly charging the wrong battery type may lead to
damage of the radio or fire.
Antenna Separation Distance
When operating your FATFISH transmitter, please be sure to maintain a
separation distance of at least 20 cm between your body (excluding fingers,
hands, wrists, ankles and feet) and the antenna to meet RF exposure safety
requirements as determined by FCC
regulations.
Regularly check the health and condition of your batteries and never leave
your radio charging unattended. Always charge in a safe area away from
combustible materials and surfaces. Do not charge if your radio becomes wet or
damaged in any way. FATFISH does not accept any liability for the use or
misuses of this Product.
F16 Radio overview
Power Requirements.
The F16 has built in USB-C charging for 3.7v Lithium cells. The Charging
circuit is designed for 2x 3.7v Li-ion 18650 unprotected celts or 2x 3.7v Li-
poty cells (23 7.4v LiPO pack) onty with a nominal cell vottage of 3.7v and
maximum charge capacity of 4.2v.
Model and protocol selection(ELRS)
Bind method
- Turn off the radio.
- Cycle power to the receiver 3 times, the receiver LED will start blinking, indicating it’s in bind mode.
- Turn on the radio, enter the ExpressLRS LUA. and select Bind.
- The receiver LED will now stay illuminated, signaling a successful bind process.
Support.
Warranty and Repairs.
Please retain your proof of purchase and contact the retailer you purchased
your F16 from, should you experience any problems with your radio hardware.
Warranty is valid for one year from the date of purchase.
Switch between remote control display and video transmission
display
In the
special function setting menu, any switch channel can be defined as a display
toggle switch
Specifications
Size: 213°200°95mm
Weight: 6089 (without battery)
Transmission frequency: 2.400GHz-2.480GHz
Transmitter module: 4-in-1 multi-protocol intemal module -OR- ExpressLRS
internal module
Transmitting power: Intemal 4-in-1 multi-protocol module : Max 100mw (protocol
dependent)
Internal ELRS : Max 500mw (transmitting power is adjustable)
Working current: 500mA
Working voltage: 6.6-8.4vDC
Remote control distance:> 4km @ 27dbm
Radio firmware: EdgeTX (Supports OpenTX also)
Channels: Up to 16 channels (depending on the receiver)
Display: 4.3-inch TFT full-color touch display with a resolution of 480 * 272
Gimbal: Hall sensor
Module Bay: JR compatible module bay
Upgrade method: Supports USB-C online / SD card offline upgrade
Approved for use
2x 3.7v LION 18650 cells (7.4v using supplied tray)
2x 3.7v LIHON 21700 cells (Assembled as 7.4v 2s Battery pack)
2 x 3.7v Lithium-polymere cells (Assembled as 7.4v 2s Battery pack)
DO NOT use
3.6v LI-ION cells
2S 6.6v LIFE Battery packs
LIFEPO4 cells
Do not use 2s 6.6v LIFE battery pack, 18650 lithium-ion cells with a nominal
voltage of 3.6v or LIFEP04 18650 Round cells. Using the built in USB charger
with incorrect battery types and voltage may cause damage to the remote
control or fire.
Check the health and condition of the batteries regularly. Do not use damaged
cells. Never charge your device unattended. Always charge in a safe area away
from flammable materials. If the remote control gets wet or damaged in any
way, do not charge it.
FATFISH is not responsible for any adverse consequences caused by using or
misusing this device.
Manufacturer by
ShenZhen FATFISH Co., Ltd
Nanshan Yungu Nanfeng Building, Nanshan District, Shenzhen city Guangdong
Province, China