KitchenAid KSMPRA Pasta Roller And Cutters Instruction Manual

June 1, 2024
KitchenAid

KitchenAid KSMPRA Pasta Roller And Cutters

PARTS AND FEATURES

PARTS AND ACCESSORIES

KitchenAid-KSMPRA-Pasta-Roller-And-Cutters-FIG-1

MODEL/ROLLER CHART

Use this chart to quickly identify which rollers and/or cutters are included with your KitchenAid product.

MODEL # ATTACHMENT(S) INCLUDED
KSMPRA Pasta roller, Spaghetti cutter, Fettucine cutter
KSMPSA Pasta roller
KSMPCA Capellini cutter, Lasagnette cutter
KSMFETPRA Pasta roller, Fettuccine cutter
KSMPDX Pasta roller, Spaghetti cutter, Fettuccine cutter, Capellini cutter,

Lasagnette cutter

PASTA ROLLER AND CUTTERS SAFETY

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:
You can be killed or seriously injured
DANGER
if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed

State of California Proposition 65 Warnings

  • WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
  • WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

  1. Read all instructions.
  2. To protect against the risk of electrical shock, do not put the Stand Mixer in water or other liquid.
  3. Close supervision is necessary when this or any appliance is used near children.
  4. Unplug the Stand Mixer from the outlet when not in use, before putting on or taking off parts, and before cleaning.
  5. Avoid contacting moving parts. Keep fingers out of discharge opening.
  6. Do not operate the Stand Mixer with a damaged cord or plug or after the Stand Mixer malfunctions, or is dropped or damaged in any manner. Return the Stand Mixer to the nearest Authorized Service Center for examination, repair or electrical or mechanical adjustment.
  7. The use of attachments not recommended or sold by KitchenAid may cause fire, electric shock or injury.
  8. Do not use the Stand Mixer outdoors.
  9. Do not let the Stand Mixer cord hang over the edge of table or counter.
  10. Do not let the Stand Mixer cord contact hot surfaces, including the stove.
  11. Also see Important Safeguards included in the Stand Mixer “Instructions” manual.

SAVE THESE INSTRUCTIONS
This product is designed for household use only.

USING THE PASTA ROLLER AND CUTTERS

SPEED SETTINGS CHART

KitchenAid-KSMPRA-Pasta-Roller-And-Cutters-FIG-3 FOR DETAILED INFORMATION ON USING THE PASTA ROLLER AND CUTTERS

Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes, and tips on how to use your Pasta Roller and Cutters.

ROLLER SETTINGS CHART

KitchenAid-KSMPRA-Pasta-Roller-And-Cutters-FIG-4

ATTACHING THE PASTA ROLLER AND CUTTERS

Before first use
To avoid damage, do not wash or immerse attachments in water or other liquid. Do not wash in the dishwasher.

NOTE : These attachments are designed to be used with pasta dough only. To avoid damaging your Pasta Roller, do not cut or roll anything other than pasta.

Installation Insruction

  1. Turn the Stand Mixer off and unplug it.
  2. For Stand Mixers with a hinged attachment hub cover: Flip up to open. For Stand Mixers with a removable attachment hub cover: Turn the attachment knob counterclockwise to remove the attachment hub cover.KitchenAid-KSMPRA-Pasta-Roller-And-Cutters-FIG-6
  3. Insert the attachment shaft housing into the attachment hub, making certain the power shaft fits into the square hub socket. If necessary, rotate the Pasta Roller or Cutter back and forth. The pin on the attachment housing fits into the notch of the hub rim when in the proper position.
  4. Tighten the Stand Mixer attachment hub knob until the attachment is completely secured to the Stand Mixer.

MAKING PASTA

IMPORTANT : When using the Pasta Roller and Cutters, do not wear ties, scarves, loose clothing or long necklaces; gather long hair with a clasp.

  1. Prepare pasta dough (see “Recipe” section). Cut dough into sections that fit in the Pasta Roller.
  2. Pull the Pasta roller adjustment knob straight out and turn to setting 1. Release the knob, making certain the pin on the Pasta roller housing engages the opening on the back of the adjustment knob, allowing the knob to fit flush against the roller housing.
  3. Turn the Stand Mixer to speed 2. Feed flattened dough into rollers to knead. Fold the dough in half and roll again. Repeat until the dough is smooth and pliable and covers the width of the roller. Lightly dust pasta with flour while rolling and cutting to aid in drying and separation.
  4. flattened dough into rollers to knead. Fold the dough in half and roll again. Repeat until the dough is smooth and pliable and covers the width of the roller. Lightly dust pasta with flour while rolling and cutting to aid in drying and separation.
  5. To make noodles, exchange the Pasta Roller for the Cutter of your choice. Feed the flattened sheets of dough through the cutter. See the “Roller settings chart” to determine the correct thickness for each type of pasta.

FOR DETAILED INFORMATION ON USING THE PASTA ROLLER AND CUTTERS:
Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes, and tips on how to use your Pasta Roller and Cutters.

USING THE PASTA ROLLER AND CUTTERS

DISASSEMBLING THE PASTA ROLLER AND CUTTERS

  1. Turn Stand Mixer off and unplug.

  2. Remove the Pasta Roller or Cutter from the Stand Mixer.KitchenAid-KSMPRA-Pasta-Roller-And-Cutters-FIG-14
    IMPORTANT: After removing the Pasta Roller or Cutter from the Stand Mixer, be sure to clean any dried dough. See “Care and Cleaning” for details. OPTIONAL: If desired, attach the next Pasta Roller or Cutter, using the directions in the “Attaching the Pasta Roller and Cutters” section.

  3. After finishing with the Pasta Roller and Cutters replace the hub cover and tighten the attachment knob on the Stand Mixer.

NOTE : Allow Stand Mixer to rest for at least 1 hour after extruding 2 consecutive pasta dough recipes

RECIPE COOKING PASTA

WARNING
Food Poisoning HazardDo not let foods that contain perishable ingredients such as eggs, dairy products, and meats remain unrefrigerated for more than one hour. Doing so can result in food poisoning or sickness.

Add 2 tsp (10 mL) salt and 1 tbs. (15 mL) oil (optional) to 6 qt (5.7 L) boiling water. Gradually add pasta and continue to cook at a boil until pasta is “al dente” or slightly firm to the bite. Pasta floats to the top of the water while cooking, so stir occasionally to keep it cooking evenly. Use a colander to drain. Dry Pasta — 7 minutes Fresh Pasta — 2-5 minutes, depending on noodle thickness

BASIC EGG NOODLE PASTA

  • 4large eggs
  • 3½ cups (830 mL) sifted all-purpose flour
  • 1 tbs (15 mL) water
  • 1 tsp (2 mL) salt

Break eggs into a glass measuring cup. Check to see that the eggs measure 7/8 cup (207 mL). If less than 7/8 cup (207 mL), add water, 1 tsp (2 mL) at a time until the measurement is reached. Place flour and salt in Stand Mixer bowl. Attach bowl and flat beater. Turn to Speed 2 and gradually add eggs and 1 tbs (15 mL) water. Mix for 30 seconds. Stop the Stand Mixer and exchange the flat beater for the dough hook. Turn to Speed 2 and knead for 2 minutes. Let dough rest for 20 minutes. Divide dough into 4 pieces before processing with Pasta Roller attachment. Follow the cooking instructions above.

Yield: About 1 ¼ pounds (579 g) dough
FOR MORE RECIPES WITH THE PASTA ROLLER AND CUTTERS:
Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes, and tips on how to use your Pasta Roller and Cutters.

CARE AND CLEANING

CLEANING THE PASTA ROLLER AND CUTTERS

These accessories are designed to be used with pasta dough only. To avoid damaging your Pasta Roller and Cutters, do not insert anything other than pasta dough.

IMPORTANT: Do not use metal objects to clean out the Pasta Roller and Cutters. Do not wash the Pasta Roller and Cutters in the dishwasher, or immerse in water or other liquids. The Pasta Roller and Cutters should be hand-washed.

  1. Turn Stand Mixer off and unplug.
  2. Completely disassemble Pasta Roller and Cutters. Use the directions from the “Disassembling the Pasta Roller and Cutters” section.KitchenAid-KSMPRA-Pasta-Roller-And-Cutters-FIG-17
  3. After cutting pasta, let Pasta Roller and Cutters air dry for one hour, then remove any dried dough using the Cleaning brush. If dried dough is difficult to remove, try tapping the attachment with your hand. Use a toothpick if necessary.
  4. After cleaning out all remaining dried dough, polish the Pasta Roller and Cutters with a soft, dry cloth and store in a dry place at room temperature. Do not wash the Pasta Roller and Cutters in the dishwasher. KitchenAid-KSMPRA-Pasta-Roller-And-Cutters-FIG-18

NOTE: Never use a knife or any other sharp object to remove excess dough. Do not run a dish towel or any other cloth through the rollers to clean them.

FOR DETAILED INFORMATION ON CLEANING THE PASTA ROLLER AND CUTTERS
Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes, and tips on how to use your Pasta Roller and Cutters.

MAINTENANCE

CARE AND CLEANING MAINTENANCE

To maintain properly (annually or after 50 uses) we recommend using a light mineral oil to lubricate the gears. Add a drop of mineral oil to each of the 4 corners of the Pasta Roller and Cutters.

TROUBLESHOOTING

WARNING

  • Electrical Shock Hazard Plug into a grounded 3-prong outlet.
  • Do not remove the ground prong.
  • Do not use an adapter.
  • Do not use an extension cord.
  • Failure to follow these instructions can result in death,
  • fire, or electrical shock.

If your Stand Mixer should malfunction or fail to operate while using the Pasta Roller and Cutter attachment, please check the following:

  1. Is the Stand Mixer plugged in?
  2. Is the fuse in the circuit to the Stand Mixer in working order? If you have a circuit breaker box, be sure the circuit is closed.
  3. Turn off the Stand Mixer for 10- 15 seconds, then turn it back on. If the Stand Mixer still does not start, allow it to cool for 30 minutes before turning it back on.
  4. Did you use the correct speed for the Pasta Roller and Cutters as suggested in the “Roller Settings Chart?”
  5. Did you attach the Pasta Roller or Cutter attachment properly as shown in the “Using the Pasta Roller and Cutters” section?
  6. Did you follow the usage instructions as described in the “Using the Pasta Roller and Cutters” section?
  7. Is your dough prepared according to the recipe?

If the problem is not due to one of the above items, see the “Arranging for Service” section in the “Warranty”. Do not return the Pasta Roller and Cutter attachments or the Stand Mixer to the retailer, as they do not provide service.

WARRANTY

WARRANTY AND SERVICE
KITCHENAID® PASTA ROLLER AND CUTTERS WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA

This warranty extends to the purchaser and any succeeding owner for Pasta Roller and Cutters operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.

Length of Warranty: One Year Full Warranty from date of purchase.

KitchenAid Will Pay **** Hassle-Free Replacement of your Pasta Roller and

for Your Choice of Cutters. See the next page for details on how to arrange

for service, or call the Customer eXperience Center toll-free at 1-800-541-6390.

OR

The replacement parts and repair labour costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center.

KitchenAid Will                       A. Repairs when your Pasta Roller and Cutters are used

Not Pay for: in other than normal single-family home use.

B. Damage resulting from accident, alteration, misuse or abuse.

C. Any shipping or handling costs to deliver your Pasta Roller and Cutters to an Authorized Service Center.

D. Replacement parts or repair labor costs for Pasta Roller and Cutters operated outside the 50 United States, District of Columbia, Puerto Rico, and Canada.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY

BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

WARRANTY AND SERVICE
HASSLE-FREE REPLACEMENT WARRANTY – 50 UNITED STATES, DISTRICT OF COLUMBIA, AND PUERTO RICO

  • We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Pasta Roller and Cutters should fail within the first year of ownership, KitchenAid will arrange
  • to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Pasta Roller and Cutters returned to us. Your replacement unit will also be covered by our one year limited warranty.
  • If your Pasta Roller and Cutters should fail within the first year of ownership, simply call
  • our toll-free Customer eXperience Center at 1-800-541-6390 Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address. (No P.O. Box numbers, please.)
  • When you receive your replacement Pasta Roller and Cutters, use the carton, packing materials, and prepaid shipping label to pack up your original Pasta Roller and Cutters and send them back to KitchenAid.

HASSLE-FREE REPLACEMENT WARRANTY – CANADA

  • We’re so confident the quality of our products meets the exacting standards of the KitchenAid brand that, if your Pasta Roller and Cutters should fail within the first year of ownership, we will replace your Pasta Roller and Cutters with an identical or
  • comparable replacement. Your replacement unit will also be covered by our one year limited warranty. If your Pasta Roller and Cutters should fail within the first year of ownership, simply call our toll-free Customer eXperience Centerat 1-800-807-6777
  • Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address.
  • When you receive your replacement Pasta Roller and Cutters, use the carton, packing materials, and prepaid shipping label to pack up your original Pasta Roller and Cutters and send them back to KitchenAid.

ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES, OR ORDERING ACCESSORIES AND REPLACEMENT PARTS

In the United States and Puerto Rico

  • For service information, or to order accessories or replacement parts, call toll-free at 1-800-541-6390 or write to:
  • Customer eXperience Center, KitchenAid Small Appliances,
  • P.O. Box 218, St. Joseph, MI 49085-0218

Outside the United States and Puerto Rico

  • Consult your local KitchenAid dealer or the store where you purchased the Pasta Roller and Cutters for information on how to obtain service.
  • For service information in Canada:
  • Call toll-free 1-800-807-6777.
  • For service information in Mexico:
  • Call toll-free 01-800-0022-767.

™ © 2016 KitchenAid. All rights reserved. The design of the Stand Mixer is a trademark in the U.S. and elsewhere. Used under license in Canada

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

KitchenAid User Manuals

Related Manuals