KitchenAid KES6551BK Semi Automatic Espresso Machine Owner’s Manual

: June 1, 2024
: KitchenAid

KitchenAid KES6551BK Semi Automatic Espresso Machine

Product Information

Specifications:

Product Name: Semi-Automatic Espresso with Burr Grinder
Model Number: KES6551
Manufacturer: KitchenAid

Product Usage Instructions

Safety Precautions:
It is essential to follow all safety guidelines provided in the manual to ensure safe usage of the Semi-Automatic Espresso Machine with Burr Grinder.

Basic Operation:

Read the user manual carefully before using the appliance.
Ensure children are supervised and instructed on safe usage.
Avoid touching hot surfaces; always use handles or knobs.
Plug the cord into the wall outlet only after attaching it to the appliance.
Do not carry the hot appliance; always allow it to cool before handling.

Cleaning and Maintenance:
Follow these steps for cleaning and maintaining your Semi-Automatic Espresso Machine:

Always turn off and unplug the appliance before cleaning.
Avoid using abrasive cleaners or materials for cleaning.
Clean any spills promptly to prevent damage to the appliance.

FAQ:

Q: Can I use accessories not recommended by KitchenAid with the machine?
A: No, using accessories not recommended by KitchenAid may cause fire, electrical shock, or injury. It is advised to use only approved accessories.
Q: How should I clean the machine?
A: Do not use abrasive cleaners or steel wool. Instead, follow
the cleaning instructions provided in the manual to maintain the machine properly.

PRODUCT SAFETY

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER
You can be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions. Misuse of appliance may result in personal injury.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. The appliance and cord should be out of reach of children.
Close supervision is necessary when any appliance is used by or near children.
Cleaning and user maintenance shall not be made by children without supervision.
Do not touch hot surfaces. Use handles or knobs.
Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn the appliance off ( ) then unplug from the wall outlet.
Never attempt to carry the hot appliance.
To protect against fire, electric shock, and personal injury do not immerse cord, plugs, or appliance in water or other liquids. Avoid spillage on the connector.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest Authorized Service Facility for examination, repair, or electrical or mechanical adjustment.
The use of accessories/attachments not recommended or sold by KitchenAid may cause fire, electrical shock, or injury to persons.
Do not use the appliance outdoors.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Turn the appliance off ( ), then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
Allow the appliance to cool completely before putting on or taking off parts, and before cleaning the appliance.
Do not clean the Semi-Automatic Espresso Machine with abrasive cleaners, steel wool, or other abrasive materials.
Use extreme caution when using hot steam.
Do not use appliance for other than intended use.
Irritation to skin or eyes can occur if they come into contact with the descaling solution. Avoid skin and eye contact. Rinse off descaling solution with clean water. Obtain medical advice after eye contact.
Damage to delicate surfaces can occur after contact with the descaling solution. Remove any splashes immediately.
Refer to the “Care and Cleaning” section for instructions on cleaning the surfaces in contact with food.
The Semi-Automatic Espresso Machine shall not be placed in a cabinet when in use.
WARNING: To avoid the risk of injury, do not open the brew chamber during the brew process.
Important Safeguards required for the compliance with the regulations in Mexico:
If the power cord is damaged, it must be replaced by KitchenAid or its service agent or by qualified personnel in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not use the appliance for any other use other than that for which it was designed. Improper use of the appliance may lead to possible personal injury.
Do not touch hot surfaces. The surface of the heating element is subject to residual heat after use. Use the handles or knobs/buttons.
This appliance is intended for use in domestic and similar applications such as the following:
- staff kitchen areas in shops, offices and other working environments;
- farmhouses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
  SAVE THESE INSTRUCTIONS

This product is designed for household use only.

ELECTRICAL REQUIREMENTS

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Voltage: 120 V~
Frequency: 60 Hz
Power: 1500 W
NOTE: If the plug does not fit in the outlet, contact a qualified electrician or service person. Do not modify the plug in any way. Do not use an adapter.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or service person to install an outlet near the appliance.
The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.

GETTING STARTED

PREPARATION BEFORE FIRST USE
Remove and discard all labeling and packaging materials attached to your Semi-Automatic Espresso Machine. Ensure you have removed all parts and accessories before discarding the packaging.
Remove the Water Tank located at the back of the Semi-Automatic Espresso Machine by lifting the Water Tank handle. Locate the plastic bag containing the Water Filter and
Water Filter Holder. Clean parts and accessories (Water Tank, Portafilter, Filter Baskets,
Milk Pitcher) using warm water and a gentle dish washing liquid, then rinse and dry thoroughly. Wipe the outer housing, Bean Hopper, and Drip Tray with a soft damp cloth and dry thoroughly. Do not immerse the outer housing or power cord in water or any other liquid.
Place the Semi-Automatic Espresso Machine on a dry, flat, level surface such as a countertop or table.

CONTROL PANEL

$KitchenAid-KES6551BK-Semi-Automatic-Espresso-Machine- $2$$

Grind Start/Stop Button
Grind Amount Select Knob
Heating Light Indicator
Power Button
Mode Button
- Espresso
- Steam
- Hot Water
Dose Button
- (1 Shot)
- (2 Shot)
Pressure Gauge
Brew Start/Stop Button
Clean Cycle Button
Temperature Button
- Low
- Medium
- High

PRIMING PUMP INSTRUCTIONS
Recommended for first time use and if the Semi-Automatic Espresso Machine has not been used for long periods of time.
Remove and discard the red plastic seal used for shipping, located at the Water Tank base.
NOTE: The Priming Pump is a clear plastic injector that can be found inside the accessory box.

Press the Priming Pump.
Dip the tip of the Priming Pump in a reservoir of water to fill it.
Hold the Priming Pump in the vertical position.
Remove the Water Tank and insert the Priming Pump in the Water Tank connector.
With the machine plugged in but powered off, press and hold the Temperature Button for 3 seconds until the Power Button ( ), Heating Light Indicator, Espresso, Steam, and Hot Water mode setting lights turn ON.
Place a container under the Group Head. Press the Brew Start/Stop Button ( ) to start the priming operation, when the machine begins working, press the Priming Pump until water comes out from the Group Head or Water Spout. If necessary, fill up the pump again and repeat steps, turning off the machine in the meantime.

CONDITIONING THE WATER FILTER
Remove the Water Filter and Water Filter Holder from the plastic bag.

Soak Water Filter for 5 minutes.
Rinse Water Filter.
Place Water Filter into Water Filter Holder.
Set date slider 2 months ahead.
Install Water Filter in Water Tank.
Place and secure the Water Tank.

FIRST USE

Place the Bean Hopper onto the machine and rotate the knob clockwise until it clicks into place. Add whole coffee beans. Place the Bean Hopper lid onto the Bean Hopper.
Fill the Water Tank with fresh water. Place the Water Tank lid.
IMPORTANT: Distilled water or mineral water can damage the Semi-Automatic Espresso Machine. Do not use either to brew Espresso.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Plug into a grounded 3 prong outlet. Press the Main Power Button to the ON position.
he machine automatically pumps water into the heater and starts heating. When the heating light stops blinking, the machine is ready for use.
Rinse the Group Head, place a container under the Group Head. Toggle the Mode Button to select Espresso mode. Toggle Dose Button to 1 and press the Brew Start/Stop Button . The machine will flush water through the Group Head and automatically stop when the cycle is complete.
NOTE: If water does not come through in the first use see “Troubleshooting” section in online “Product Guide.”
To rinse the Steam Wand, direct the Steam Wand towards the Drip Tray or into a cup. Then, toggle the Mode Button to select Steam mode and press the Brew Start/Stop Button to start. Allow water to flow for 3 to 5 seconds then, press the Brew Start/Stop Button to stop.

START UP CHECKLIST

Soak Water Filter for 5 minutes before inserting into the Water Filter Holder.
Install Water Filter and fill Water Tank.
Secure Water Tank.
Add beans and secure the Bean Hopper to the grinder. If it is not properly secured, the power light will flash.
Plug in the power cord.
Turn the machine ON, the water pump will start working and the water will begin to heat up.
When heating is done, the temperature light will stop flashing.

NOTE: If the Hot Water Mode Button light blinks, refer to the QR code or the “Priming Pump Instructions” section.

PRODUCT USAGE

DOSING

Select desired Filter Basket (see “Basket Selection Chart”). Press the Filter Basket into the Portafilter until it clicks into place.
Basket Selection Chart $KitchenAid-KES6551BK-Semi-Automatic-Espresso- Machine- $4$$
Insert the Portafilter into the Portafilter holder under the grinder.
Select grind size: Move the lever to select the desired size of your grind, from coarse to fine.
Select coffee dose and grind amount: Rotate the Grind Amount Select Knob to adjust the dose and ground amount. The knob can be adjusted from less to more for 1 Shot on the left side, and 2 Shot on the right side.
To Start/Stop grinding: Press the Grind Start/Stop Button at the center of the Grind Amount Select Knob.
To tamp: Tap the Portafilter to level the ground coffee bed and rest on a flat surface. Use the Tamper to tamp down the ground coffee to the mark inside the basket. Sweep excess coffee grounds from the rim.

Recommendations Dosing
Ideal dose: The baskets include an indent that marks the height of an ideal dose after tamping. After finding your preferred grind size, adjust the grind amount until you are able to tamp to the ideal dose as shown in the diagram.
Personalize Dosing
Grind size: Personalize your Espresso by adjusting the grind size to find the rich and smooth flavor that suits your taste best.

If the Espresso is too acidic or watery for you, try a finer grind size.
If the Espresso is too bitter for you, try a coarser size. $KitchenAid-KES6551BK-Semi-Automatic-Espresso-Machine- $5$$
Smart dosing: Get the right grind without the guesswork. Smart dosing technology eases preparation by producing the ideal volume and consistency for 1 or 2 Shots of Espresso at the push of a button.
Manual dosing: Personalize your Espresso by manually dosing the exact amount of grounds you want. With the Portafilter in the grinding cradle, hold down the Grind Start/Stop Button until it reaches your ideal amount of grounds, then release.
NOTE: Manual grinding will stop after 3 minutes to avoid overheating. The
Semi-Automatic Espresso Machine is not intended for continuous non-stop grinding.

ADJUSTING TOP BURR

For additional grind size personalization, the Top Burr can be adjusted to reach 8 additional finer grind sizes.

Remove the Bean Hopper lid, rotate the knob and lift the Bean Hopper to remove. Empty beans into another container by aligning Bean Hopper over container and rotating the knob again. Replace the empty Bean Hopper and rotate the knob to lock into place. Press the Grind Start/Stop Button to run the grinder until empty.
Unplug the Semi-Automatic Espresso Machine. Remove the Bean Hopper and discard of any remaining coffee beans in the machine. Lift the Wire Handle of the Top Burr. Twist to unlock and lift the Top Burr by using the Wire Handle.
TIP: Use the Brush found in the Accessory Storage Tray to clean, underneath the Bean Hopper and around the Top Burr.
Lift the Top Burr micro adjustment latch. Then, rotate the Top Burr to desired setting and engage adjustment latch back into position.
Return the Top Burr to the machine and twist to lock into position. Reattach the Bean Hopper.

BREWING EXTRACTION GUIDE

Position the Portafilter under the Group Head with the handle align to unlock. Raise the Portafilter into the Group Head and twist to the right side to lock.
Toggle the Mode Button to select Espresso mode. Toggle the Dose Button to select desired number of Shots 1 (~ 1 oz/~ 29.5 ml) or 2 (~ 2 oz/~ 59 ml).
Toggle the Temperature Button to select desire extraction temperature. Press the Brew Start/Stop Button to run selected Espresso cycle.
NOTE: Do not remove the Portafilter when brewing.

Personalize Brew
Temperature: Utilize the easily selectable temperature settings to adjust the Espresso temperature to your taste.

Low
Medium
High change pre-programmed Espresso volume for 1 or 2: Toggle the Mode Button to select Espresso mode. Select the dose you desire to program (1 or 2). Press and hold until the desired Espresso amount is reached in your cup. While programing your selected dose, the dose and the Brew Start/Stop Button lights will blink. Lights will stop blinking when programming is complete.
TIP: To restore all factory settings, press and hold Dose Button for 3 seconds. All indicator lights will blink indicating that all settings are restored.

STEAM

Toggle the Mode Button to select Steam mode for heating and frothing the milk. The machine will start heating if not already heated, indicated by the flashing heating light. The heating light will go solid when machine is ready for steaming.
Fill between 1/3 and 1/2 volume of the Milk Pitcher with milk to allow for frothing expansion.
Purging 1: Angle the Steam Wand toward the Drip Tray to purge any water condensed inside the Steam Wand. Press the Brew Start/Stop Button to run a steam cycle for 1 second and stop by pressing the Brew Start/Stop Button .
Frothing: Submerge the tip of the Steam Wand just below the surface of milk in the Milk Pitcher. Press the Brew Start/Stop Button to initiate the steam. Froth until desired level of foam and temperature is reached. To stop the steam, press the Brew Start/Stop Button again. To avoid splattering, wait until the steam stops before removing the Steam Wand from the milk. NOTE: You can use the Steam Wand to preheat cups and Filter Baskets.
Heating: Submerge the Steam Wand deeper in the Milk Pitcher. Press the Brew Start/Stop Button to initiate the steam. Heat until the Milk Pitcher is too hot to touch. To stop the steam, press the Brew Start/Stop Button again.
Purging 2: Angle the Steam Wand toward the Drip Tray to purge any water condensed inside the Steam Wand. Press the Brew Start/Stop Button to run a steam cycle for 2 to 3 seconds and stop by pressing the Brew Start/Stop Button .

Tips and Recommendations

TIP: Immediately after us, wipe the Steam Wand and purge it by turning it towards the Drip Tray and letting steam run for 2 to 3 seconds.
TIP: When frothing, submerge the tip of the Steam Wand just below the surface of milk and position until a smooth hissing sound is heard. To just heat the milk, submerge the
Steam Wand into the milk. To avoid overheating the milk, stop steaming when the Milk Pitcher is hot to touch.

HOT WATER

Toggle the Mode Button to select Hot Water mode. Place a cup under the Water Spout. NOTE: Position your cup with consideration that the Water Spout is angled towards the Group Head.
Press Dose Button to select the volume of water 1 (~ 5.5 oz/~ 163 ml) or 2 (~ 7 oz/~ 207 ml). Press the Brew Start/Stop Button to start hot water cycle.

Personalize Hot Water

Water dose: To use less than the default water doses, you can pause the cycle by pressing the Brew Start/Stop Button at any time to stop the flow of water before the cycle complete.
To change pre-programmed water volume for 1 or 2: Toggle the Mode Button to select Hot Water mode. Select the dose you desire to program (1 or 2). Press and hold Brew Start/Stop Button ) until the desired water amount is reached in your cup. While programing your selected dose, the dose and the Brew Start/Stop lights will Button blink. Lights will stop blinking when programming is complete.
TIP: To restore all factory settings, press and hold Dose Button for 3 seconds. All indicator lights will blink indicating that all settings are restored.

UNDERSTANDING THE PRESSURE GAUGE

The Pressure Gauge is easy to read, so you can monitor and make sure it is hitting the sweet spot for every shot. Change the amount of grounds or your tamping force to secure the pressure you like best.
Ideal Espresso range: Indicates you have the right amount of pressure for your Espresso extraction.
Under extraction range: When the needle has not reached the Espresso range, this indicates the ideal pressure range has not been achieved.
This happens when the water flows too fast through the ground coffee, resulting in a watery, flavorless shot with little to no crema.
This occurs because of 3 main reasons:
The coffee ground is too coarse
Under tamping
Not enough coffee in the Filter Basket
Over extraction range: When the needle has surpassed the Espresso range, this indicates the ideal pressure range has been exceeded.
This happens when the water flows too slowly through the ground coffee, resulting in a small, dark and bitter Espresso shot with uneven crema.
This occurs because of 3 main reasons:
- The coffee ground is too fine
- Over tamping
- Too much coffee in the Filter Basket

ESPRESSO BREWING TIPS

Coffee Beans:
- Use freshly ground coffee.
- Use recently roasted coffee beans (2 weeks).
- Store beans in a cool, dark and dry container.
- Buy coffee beans in small packs.
Preheat cups with hot water.
Preheat Portafilter and Filter Baskets with hot water.
Purge Group Head before each use.

CARE AND CLEANING

REPLACING THE WATER FILTER

Soak Water Filter for 5 minutes.
Rinse Water Filter.
Place Water Filter into Water Filter Holder.
Set date slider 2 months ahead.
Install Water Filter in Water Tank.
Place and secure the Water Tank.

GRINDING SYSTEM

For best results, regularly clean the Semi-Automatic Espresso Machine and accessories.
IMPORTANT: Unplug the Semi-Automatic Espresso Machine before cleaning. Allow the appliance to cool completely before putting on or taking off parts, and before cleaning the appliance.

WARNING
Electrical Shock Hazard Unplug before servicing.
Failure to do so can result in death or electrical shock.

NOTE: Do not use abrasive cleansers or scouring pads when cleaning the Semi-Automatic Espresso Machine, parts, or accessories. Do not immerse the Semi-Automatic Espresso Machine or cord in water or other liquids.

Lift the Bean Hopper lid, twist the knob and lift the Bean Hopper to remove. Twist the bottom lock to empty the Bean Hopper into another container.
Replace the empty Bean Hopper and lid. Press the Grind Start/Stop Button to run the grinder until empty.
Remove the Bean Hopper, locate the Wire Handle on the Top Burr, rotate and lift the handle to remove Top Burr.
Clean the Top Burr with the cleaning Brush. Clean the bottom burr with a Brush or use a vacuum cleaner to remove coffee residue.
Clean the chute by sticking the wire side of the cleaning Brush through the chute from either end to clean away any grounds or residue.
The Bean Hopper and Bean Hopper lid can be cleaned with warm, soapy water, then rinse with clean water and dry with clean soft cloth.
Align the Top Burr back in place and twist clockwise to secure. Replace the Bean Hopper and the lid.
NOTE: Make sure that water never comes into contact with the Burr Grinder system.

BREWING SYSTEM

Clean the Steam Wand after every use. Toggle the Mode Button to select Steam mode. Position the Steam Wand over Drip Tray or into a cup. Press the
Brew Start/Stop Button , wait 2 to 3 seconds. Press it again to stop. Wipe down Steam Wand exterior with a soft damp cloth.
Wash the Drip Tray, Portafilter, Filter Baskets, Milk Pitcher, and Drip Tray plate in warm, soapy water and rinse with clean water. Dry with a soft cloth.
When the Drip Tray indicator rises and becomes visible above the surface of the Drip Tray plate, empty the Drip Tray and rinse with warm water.
Wipe the Semi-Automatic Espresso Machine housing, Cup Warmer Tray, Accessory Storage Tray, and Group Head with a clean soft damp cloth.

PROGRAMMING WATER HARDNESS

Before proceeding with programming, you will need to know your water hardness. If you do not know your water hardness, you can purchase a water hardness test kit. To configure the water hardness:

Press the Mode Button to select the Hot Water mode.
Press and hold the Mode Button for 3 seconds until the Espresso, Steam, and Hot Water mode LEDs start blinking slowly.
Press the Mode Button to select the Hot Water mode.
Press and hold the Mode Button for 3 seconds until the Espresso, Steam, and Hot Water mode LEDs start blinking slowly.
After selecting the water hardness, press the Brew Start/Stop Button to confirm your choice. The Brew Start/Stop Button LED indicator will blink once, and the machine will begin heating up.

DESCALING THE SEMI-AUTOMATIC ESPRESSO MACHINE

The descaling program enables simple and effective descaling of your Semi- Automatic Espresso Machine. Descale the Semi-Automatic Espresso Machine regularly, but a minimum

whenever the Clean Cycle Button light is blinking. The frequency of descaling depends on the hardness of the water in your region.
NOTE: The descaling process runs in 2 phases, takes approximately 2 minutes for each phase and must be completed before next use. At any time during the descaling program you can pause the cycle by pressing the Brew Start/Stop Button And, resume too by pressing it again.
IMPORTANT: Only use descaling solutions intended for Semi-Automatic Espresso Machines.

SET UP DESCALING

Remove the Water Filter and fill the Water Tank to the 2.5 L mark. Add the descaling solution and follow the instructions provided on the package for the correct ratio.
When the power and heating LEDs are ON, press and hold the Clean Cycle Button seconds. The Clean Cycle Button LED will stay ON and the Brew Start/Stop Button LED will flash.
Phase 1 (Cleaning): Place two containers (~ 30 oz/~ 887 ml each) to collect water, one under the Group Head and Water Spout, and another under the Steam Wand. Press the Brew Start/Stop Button to begin the cleaning cycle. NOTE: The descaling process will run continuously, first dispensing water through the Group Head, then the Water Spout, and finally through the Steam Wand.
Once the cleaning cycle is complete, unit will start preheating, and the heating LED will blink. When preheating is complete, the heating LED will stay ON, and the
Clean Cycle Button LED will blink, indicating it is ready to start the next phase of the cleaning cycle.
IMPORTANT: Before starting Phase 2, empty, rinse, and thoroughly clean the Water Tank.
Phase 2 (Rinsing): Fill the Water Tank to the 2.5 L mark, replace the Water Filter and reinstall the Water Tank on the machine. Place the same two containers under the Group Head and Steam Wand. Press and hold the Clean Cycle Button for 3 seconds until the Clean Cycle Button LED light stays solid. The Brew Start/Stop Button LED will flash. Press the Brew Start/Stop Button to initiate the rinse cycle.
NOTE: The rinse cycle will behave like the cleaning cycle; water will continuously dispense from the Group Head, Water Spout, and Steam Wand. 6. When the second rinse cycle is complete, both Brew Start/Stop Button and Clean Cycle Button LEDs will blink simultaneously. Press any button to exit the cycle and enjoy making an Espresso.
NOTE: In case of any interruptions (for example low water level or power outage), the cleaning cycle will reset and start from the beginning of the descaling cycle .

FILTER BASKET CLEANING

Regular Cleaning
Detach the used Filter Basket from the Portafilter. Rinse the Portafilter and the Filter Basket under hot water right after use and remove all residue using a Brush and light detergent.
Filter Basket Blockage
In case you notice your Espresso shot takes longer to pull, only comes out of one spout, or no Espresso comes out at all, look for any type of blockage in the holes of the Filter Basket. To clean, use a pin to gently unblock the hole(s). If the issue persists, soak the Filter Basket in a cleaning solution for 25 minutes and rinse thoroughly.

STEAM WAND CLEANING

Regular Cleaning
The Steam Wand must be cleaned after every use. Use a piece of dampened cloth to wipe the exterior of the Steam Wand. Then, direct the Steam Wand to the Drip Tray, select the Steam mode and press Brew Start/Stop Button . Let the steam work for 2 seconds. This will purge the Steam Wand from any milk remaining inside the wand.

Steam Wand Blockage

If you notice a slow ﬂow of water or steam coming out of the Steam Wand, turn the
Semi-Automatic Espresso Machine oﬀ, unplugged the appliance and allow it to cool. Use a pin to clean the Steam Wand tip.

REGULAR STORAGE CARE

Before storing, press the Power Button to switch the Semi-Automatic Espresso Machine off and then unplug.

Remove unused beans from the Bean Hopper.
Clean the grinder and Drip Tray.
Empty and re-install Water Tank.
Ensure the machine is cool, clean and dry.
Insert all accessories into position or into the Accessory Storage Tray.
Store upright. Do not place anything on top.

WINTER STORAGE CARE

IMPORTANT: To avoid damage, use and store your Semi-Automatic Espresso Machine where it will not freeze. Because some water remains inside the appliance, freezing can damage the product. If storing or moving during freezing weather, purge your
Semi-Automatic Espresso Machine.

Remove the Water Tank from the appliance.
While the appliance is power off, press and hold the Dose Button and
- Brew Start/Stop Button for 3 seconds, until the power LED and the
- Brew Start/Stop Button LED become solid and the Dose Button LEDs flash.

LIMITED WARRANTY AND SERVICE

KITCHENAID® SEMI-AUTOMATIC ESPRESSO MACHINE WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA
This limited warranty extends to the purchaser and any succeeding owner for KitchenAid Semi-Automatic Espresso Machine operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.
Length of Warranty: Two Year Limited Warranty from date of delivery.

KitchenAid Will Pay for:
The factory-specified replacement parts and labor to correct defects in materials and workmanship that existed when this product was purchased, or at its sole discretion, replace the product. In the event of a replacement, your product will be warranted for the remaining term of the original unit’s warranty period.
Warranty service is provided by our Authorized KitchenAid Service Center.
See the “Arranging For Service” section in this warranty for details on how to arrange for service, or call the Customer eXperience Center (CxC) toll-free at 1-800-541-6390.
KitchenAid Will Not Pay for:
Repairs when your Semi-Automatic Espresso Machine is used in other than normal single family home use.
Defects or damage resulting from accident, alteration, misuse, abuse, fire, floor, or acts of God.
Any shipping or handling costs to deliver your Semi-Automatic Espresso Machine to an Authorized Service Center.
Replacement parts or repair labor costs for Semi-Automatic Espresso Machine operated outside the 50 United States, District of Columbia, Puerto Rico, and Canada.
DISCLAIMER OF IMPLIED WARRANTIES
LIMITATION OF REMEDIES IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO TWO YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

ARRANGING FOR SERVICE OR ORDERING ACCESSORIES AND REPLACEMENT PARTS
We’re confident the quality of our products meets the exacting standards of KitchenAid If your Semi-Automatic Espresso Machine should fail:

Before contacting us to arrange service, please take a few minutes to review the Troubleshooting or Problem Solver section of the Product Guide, or visit http://www.kitchenaid.com/customer-service.
If your Semi-Automatic Espresso Machine requires repair, please contact the CxC to arrange for service:
- In the United States and Puerto Rico:
- For service information, or to order accessories or replacement parts, call toll-free at 1-800-541-6390 or write to:
- Customer eXperience Center, KitchenAid Small Appliances, P.O. Box 218, St. Joseph, MI 49085-0218
- Outside the United States and Puerto Rico:
- Consult your local KitchenAid dealer or the store where you purchased the Semi-Automatic Espresso Machine for information on how to obtain service.
- For service information in Canada:
- Call toll-free 1-800-807-6777.
- For service information in Mexico:
- Call toll-free 01-800-0022-767.
- The Semi-Automatic Espresso Machine should be properly packaged to avoid damage in transit as we will not be responsible for any such damage.
If your Semi-Automatic Espresso Machine is still under warranty, KitchenAid will return the repaired unit or, at our option, an identical or comparable unit to your door free of charge. If your product is no longer under warranty, the CxC agent would guide through the service process and costs shall be borne by the consumer.