kmart 43334759 Window Film Instruction Manual
- June 1, 2024
- Kmart
Table of Contents
kmart 43334759 Window Film
Specifications
- Suitable for: Indoor, flat, smooth, and clean glass surfaces
- Size: Customizable based on window dimensions
- Material: Window film
Product Usage Instructions
- Preparation:
- Clean your window thoroughly before applying the film. Measure the size of your window both in width and length.
- Cutting the Film:
- Cut the film into a size that is approximately 1 inch larger than the window dimensions.
- Wetting the Window:
- Spray water to wet the window completely. This will help in positioning and adhering to the film smoothly.
- Applying the Film:
- Peel off the backing clear protective film gently.
- Position the film against the window and use your finger to press across the entire top of the film to allow it to slightly grip.
- Smooth out the film with a squeegee, ensuring there are no air bubbles trapped underneath.
- Drying the Window:
- Dry off the window with a towel after applying the film to ensure a clean finish.
- Suitable Surfaces:
- The window film is suitable for indoor, flat, smooth, and clean glass surfaces such as interior windows, glass doors, office partitions, and bathroom glass.
Installation Steps
- Clean your window thoroughly. Measure the size of your window both width & length.
- Cut film into proper size, approximately 1 inch larger than the window.
- Spray water, and wet the window completely.
- Peel off the backing clear protective film gently.
- Position the film against the winds across the entire top of the film to allow it to slightly grip.
- Smooth out the film with the squeegee, ensuring there are no air bubbles. Dry off the window with the towel.
Installation Tips
- The window film is only suitable for indoor, flat, smooth, and clean glass. For example, the interior surfaces of windows and glass doors, glass office partitions, and bathroom glass.
- Remove the transparent backing, and place the smooth side of the film on the window.
- Spraying a lot of soapy water is the key point, the more water the better.
- It is recommended that installation be completed by at least 2 people
Recommended Tools: (not provided with product)
- Squeegee,
- Measuring Tape,
- Stainless Steel Ruler.
- Scissors (Razor Knife),
- Scraper (Credit Card),
- Spray Bottle,
- Lint Free Towel.
Frequently Asked Questions
- Q: Can this window film be used on outdoor windows?
- A: No, the window film is only suitable for indoor use on flat, smooth, and clean glass surfaces.
- Q: How do I remove the window film?
- A: To remove the film, gently peel it off starting from one corner. Use a mild adhesive remover if needed to clean any residue.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>