QAZQA 106615 Modern Floor Lamp Cloth Instruction Manual
- June 1, 2024
- QAZQA
Table of Contents
QAZQA 106615 Modern Floor Lamp Cloth
Product Information
Specifications:
- Model: Cloth FL 106612, 106615
- Voltage: 220-240V~
- Frequency: 50Hz
- Socket Type: E27
- Maximum Wattage: 40W
Product Usage Instructions
- Ensure the power source matches the voltage requirements of 220-240V~ and 50Hz.
- Use suitable light sources with E27 socket type, not exceeding 40W.
- Install the Cloth FL White 106612 or Cloth FL Black 106615 as per your preference.
Installation Steps:
- Locate a suitable location for the light fixture.
- Securely mount the fixture following the manufacturer’s instructions.
- Insert the compatible E27 light source, ensuring it does not exceed 40W.
- Connect the fixture to the power supply and switch on to test functionality.
Maintenance:
Regularly clean the fixture using a soft, dry cloth. Ensure the power is
switched off before cleaning.
Product Safety:
Do not exceed the maximum wattage of 40W to prevent overheating and
potential hazards.
Contact Information:
- FittinQ B.V. – Smaragdweg 52, 5527 LB Hapert, The Netherlands – www.qazqa.nl
- FittinQ LTD – 55 Baker Street, London, W1U 7EU United Kingdom
FAQ:
-
Q: Can I use a light source with higher wattage than 40W?
A: No, it is recommended to use a light source with a maximum of 40W to ensure safe operation of the fixture and avoid overheating. -
Q: How do I clean the fixture?
A: Use a soft, dry cloth to gently wipe the fixture. Ensure the power is switched off before cleaning to prevent accidents. -
Q: Can I use different socket types with this fixture?
A: No, this fixture is designed for E27 socket-type light sources only. Using other socket types may damage the fixture and pose safety risks.
Safety Precautions
INSTALLATION
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference
-
The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
-
Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
-
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
-
Exterior lighting must not be installed during rain.
-
Take account of the minimal separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components.
-
Take account of all available technical information.
-
Meaning of symbols:
This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste. -
Take note of the symbols when connecting wires:
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert,
The Netherlands
www.qazqa.nl
FittinQ LTD
55 Baker Street,
London, WIU 7EU
United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>