PawHut D00-108V01 Folding Pet Stroller User Manual

PawHut D00-108V01 Folding Pet Stroller

IMPORTANT
RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

1. For pets only.
2. Do not leave a pet in the stroller unattended.
3. Always apply the brake whenever the stroller is stationary.
4. The maximum weight capacity is 60 lbs.

Cleaning and maintenance

1. Unsnap the button on the stroller;
2. Take apart the canopy;
3. Take out the cushion;
4. Wipe the stroller slightly.

PART LIST

1. To open the stroller: release the folding hook as the picture shows, lift the handlebar, unfold the stroller and make sure both joints are locked.
2. Assemble the front wheel: insert the axle of the wheel into the hole TILL A SOUND “CLICK” as pictures 2-1. Disassemble the front wheel: press the metal clip button as in picture 2-2 with one hand and remove the wheel with the other hand.
3. Assemble the rear wheel: insert the tube leg into the wheel connector till the “click” sound as in Figure 3-1, and press the button in the middle of the rear wheel and insert the wheel onto the axle as in Figure 3-2.
4. Disassemble rear wheel: reverse operation as. (figure 3-2)
5. To attach the footboard: attach the footboard position to the bottom and tighten the screws.
6. To attach the cup holder: aim at the stake on the handle tube and fix the cup holder.
7. To step the brake pole down to stop the stroller, and lift it to release the brake.
8. Fasten the safety leash with the pet collar.
9. Fold the stroller: unzip the canopy window first, then press the folding button in the arrow direction to fold the stroller and fasten the folding hook.

If you have any questions, please contact our customer care centre.
Our contact details are below 001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070
MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>