Outsunny 84B-396 Wood Adirondack Chair Instruction Manual
- June 1, 2024
- Outsunny
Table of Contents
Outsunny 84B-396 Wood Adirondack Chair
Product Information
Specifications:
- Model: IN221000089V01_GL_84B-396
- Language: English
- Usage: Indoor
Product Usage Instructions
Assembly:
- Ensure all parts are included as per the manual.
- Do not confuse similar screws; make sure to use the correct ones for each step.
- Connect all parts loosely before fully tightening any bolts.
Step-by-Step Guide:
- Start by identifying the components using the provided diagram.
- Follow the numbered sequence for assembly to ensure correct installation.
- Tighten bolts gradually as each part is connected to avoid misalignment.
FAQ
Q: What should I do if I encounter missing parts?
A: In case of missing parts, please contact our customer support for assistance and replacement.
Q: Can this product be used outdoors?
A: No, this product is designed for indoor use only to ensure durability and safety.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only for domestic use
Use tips:
- Put the chair stably on a flat floor.
- Mount the garden chairs in the shelter of the weather.
- Stay away from open flames.
- Don’t hang anything in the structure.
- Avoid the overload at the anchors/structure.
- It is advised that don’t stay on the chairs when there is a storm.
- Do not use in adverse weather condition and cover furniture when not in use.
Precautions before assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance:
- Clean with a soft fabric.
- Regularly remove leaves and / or water collected on the canvas.
- Check the chair regularly.
Storage conditions:
*The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Maintenance:
*Don’t use this product if the seat cloths, cloth cushion or tarpaulins are ageing, and contact our customer service.
Caution with the risks of pinching or cuts during assembly.
The manufacturer declines all responsibility in case of damages due to a bad
installation or due to weather.
PARTS
HARDWARE
NOTE
Do not confuse similar screws.Do not tighten bolts fully until all parts
are connected!
INSTALLATION
US
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
[email protected]
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA