Outsunny 84C-057 Steel Outdoor Garden Gazebo Installation Guide
- June 1, 2024
- Outsunny
Table of Contents
Outsunny 84C-057 Steel Outdoor Garden Gazebo
PARTS
Mounting Instructions
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
WARNING
- Find a flat and stable surface large enough to set up the folding pavilion. Carefully take the tent frame out of the bag and place it on a dry surface (sand, grass or firm surface).
- Follow these instructions carefully to avoid getting your hands and fingers caught in the moving parts of the frame when opening and closing the frame. You need at least two people to safely assemble and dismantle the folding pavilion. Do not try to set up the tent by yourself, as pulling on one side can overload the tent legs and damage them unnecessarily. To avoid damage, the tent must be pulled out in tandem.
- In windy conditions, secure the tent using the ropes attached to each side of the canopy. Attach the ropes to the pegs at a 30 degree angle and anchor them to the ground with a hammer. If the canopy is placed on a hard surface, secure the 4 sides with bricks or sandbags.
- Do not set up the pavilion in windy weather conditions. This can lead to injuries and/ or damage to your tent.
- Do not use chemical additives to clean the roofs and side walls. The water temperature can be a maximum of 30°C.
- Make sure that you pack the folding tent dry and store it upright in the bag provided in a dry place. A damp tent can get mold stains.
- No liability is accepted for damage caused by improper storage or cleaning.
- Please take appropriate actions as heavy rain, wind and snow can damage the tent. If necessary please disassemble and store for later use.
- In snowy conditions please do not allow the thickness of the snow to be more than 5cm on the roof, this should be cleared as soon as possible for your safety.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>