Outsunny 845-181 Hose Reel Support Instruction Manual
- June 1, 2024
- Outsunny
Table of Contents
Outsunny 845-181 Hose Reel Support
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Installation
NOTE! Read the instruction manual carefully before using the tool and follow all given instructions.Save the instructions for further the reference.
Fasten metal mounting to the wall or ceiling with screw.
- Drill 4x M8 holes to match the holes located in the Mounting Bracket.
- Connect the hose reel to the Mounting Bracket with the Pivot Pin.
It is recommended to install the mounting bracket 0.8 metre from the mounting bracket to floor .
- Pull the hose, It has 2-3 lock positions every one metre.
- Please don’t pull at the hose when it has finished.
- Please hold the nozzle when the hose is retraction until it is finished.
Troubleshooting
The most common malfunction is :the hose cannot be retracted automatically
after fully extending the hose.
The reason may be that:The hose end is locked as the stop anywhere mechanism
stays in the locking point,and there’s no extra hose to be pulled out for a
release. There are two ways to solve this:
- hold the hose at the yellow waring mark and pull with a jerking motion until the hose retracts.
- Place the item with its right side down, pull on the hose until it retracts.
WATER HOSE REEL
Model| Hose length| Hose material| Working Pressure| Temperature| Outer casing
material| Size of Inlet
---|---|---|---|---|---|---
XBW-01| 20M| PVC| 8Bar| -5 C-45 C| pp| 3/4″
XBW-02| 15M
XBW-03| lOM
XBW-05| 30M
AIR HOSE REEL
Model| Hose length| Hose material| Working Pressure| Temperature| Outer casing
material| Size of Inlet
---|---|---|---|---|---|---
XBA-01| 20M| PVC/PU/
PU mesh| 24Bar| -5 C-45 C| pp| 1/4″
XBA-02| 15M
XBA-05| 30M
XBA-03| lOM| 8Bar
Customer Support
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
