Outsunny 845-079V01 Garden Shed Instruction Manual
- June 1, 2024
- Outsunny
Table of Contents
Outsunny 845-079V01 Garden Shed
Product Information
- Specifications
- Model: 845-079_845-079V01
- Dimensions: Various sizes as per the parts list
- Components: GL, GC, P6, GF, B1, etc. (refer to parts list for full details)
Product Usage Instructions
- Assembly Instructions
- Refer to the parts list to ensure all components are available.
- Begin by assembling components labelled with corresponding numbers and letters.
- Follow the numerical order provided in the parts list for proper assembly.
- Installation Guide
- Identify the screw mounting positions as indicated in the manual.
- Securely mount each component according to the specified locations.
- Consult the installation details on the following page for additional guidance.
- Maintenance
- Regularly check for loose components and tighten them if necessary to ensure stability and safety.
FAQs
- Q: How do I know if all parts are included in the package?
- A: Refer to the parts list provided in the manual. Each component is listed with a quantity count to help you verify the contents.
- Q: Are there any specific tools required for assembly?
- A: Basic tools such as screwdrivers and wrenches may be needed for assembly. Refer to the assembly instructions for any specific tool requirements.
TOOLS RECOMMENDED
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
ASSEMBLY PREPARATION
- Please check local building codes regarding footings, location and other requirements before beginning construction.
- Study and understand this owner’s manual of important information and helpful tips for easier and more enjoyable assembly.
Assembly instructions:
- Reviewing all instructions and the appropriate information before you begin, make sure to follow the step sequence carefully for successful results.
Flooring base:
- The site must be prepared so that the base of the shed is level all round and checking with a spirit level is required.
- The base can be constructed with treated timber or concrete, to stop the moisture from getting into the shed, The shed is not designed to be built onto the lawn directly. Also, the ground will get muddy during rainy days.
- If a concrete pad is made, it is important that this slopes towards the edges to prevent water ingress. Time must be allowed for any concrete or cement to dry before building the shed on top.
- Bases can also be constructed from bricks, blocks, or mounted on a concrete pad.
- The bricks or blocks should be cemented onto firm and level concrete footings and the greenhouse frame drilled and screwed to the base.
Parts and Parts List:
- Before you start, separate and identify all the parts and hardware to be sure that you have all the necessary parts for your building (refer to the Parts List Page).
- Do not attempt to assemble the building if parts are missing because any building left partially assembled may be seriously damaged by light winds.
Safety must be put in the No. 1 position:
- Select a dry and calm day for your assembly. A team works (Two or more people ) is required during the assembly;
- Wearing safety gloves, eye protection and long sleeves during the assembly to prevent injury; Pay attention to the sharp edge of some parts;
- Children and pets are not allowed to enter the construction site;
- Never concentrate your total weight on the roof of the building. When using a step ladder make sure that it is safe;
Care & Maintenance
- Keep the shed clean with a soft cloth, use water if necessary;
- Keep the door tracks clear of dirt and other stuff that prevents them from sliding easily.
- Clean the snow with the necessary tools to make sure it is safe to enter; Heavy snow may cause collapse, so please make sure safety before entering.
- The shed is not made for living but for storing stuff.
- NOTICE: If there is slight bending on the corners
- Pls wear gloves and stretch the corners slightly until they are flat
- Then the sheets will be normal and there is no affection to the assembling
Product list
INSTALLATION INSTRUCTION
If you
have any questions, please get in touch with our customer care centre.
- Our contact details are below:
- 001-877-644-9366
- customerservice@aosom.com.
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
If you have any questions, please get in touch with our customer care centre.
- Our contact details are below:
- 416-792-6088
- customerservice@aosom.ca.
- Imported by Aosom Canada Inc.
- 7270 Woodbine Avenue, Unit 307, Markham,
- Ontario Canada L3R 4B9
- MADE IN CHINA
If you have any questions, don’t hesitate to get in touch with our customer care centre.
- Our contact details are below:
- 0044-800-240-4004
- lenquiries@mhstar.co.uk.
- IMPORTER ADDRESS:
- MH STAR UK LTD
- Unit 27, Perivale Park,
- Horsenden Lane South
- Perivale, UB6 7RH
- MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>