THALES SWYSPINPAD Gemalto SWYS Pin Pad User Guide
- June 1, 2024
- THALES
Table of Contents
SWYSPINPAD Gemalto SWYS Pin Pad
“`html
Product Specifications
-
Model: Gemalto SWYS Pin Pad
-
Connection: USB & Bluetooth
-
Compliance: EN 55032:2015 (AC:2016-07) + A11 : 2020 Class
B -
Regulations: UK Electromagnetic Compatibility Regulations 2016
(S.I. 2016/1091)
Product Usage Instructions
Power On/Off the Device
To power on the device, press and hold the Touch Key 0 for 2
seconds. To power off, repeat the same step.
Connecting the Device
Connect the device using the provided USB-C cable or via
Bluetooth. To connect via Bluetooth, press Touch Key 0 (Menu),
select 2 BLE ON for pairing the first time, then establish the
connection.
Approving Operations
To approve an operation, follow the on-screen prompts. Use the
device information displayed to verify the operation.
Card Insertion and Canceling Operations
When required, insert the card as instructed. To cancel an
operation, press and hold the Touch Key 0 for 2 seconds.
Important Note: Only use the supplied USB cable
with the device. Do not transport the device with the USB cable
connected. The device will automatically switch to USB-C mode when
connected and revert to Bluetooth mode upon disconnection of the
USB-C cable.
Frequently Asked Questions (FAQ)
Q: Can I use any USB cable with the device?
A: No, only use the USB cable supplied with the device to ensure
proper functionality and safety.
Q: How do I switch between USB and Bluetooth modes?
A: The device will automatically switch to USB-C mode when
connected and back to Bluetooth mode when disconnected.
“`
PDM REF : 006-000643-001_B / RECTO
Important Safety Instructions
Regulatory and Safety Notices
FCC Warning
Gemalto SWYS Pin Pad
Disposal and Recycling Information
EU (European Union) : European Community declaration of conformity
UK Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091)
Smart Card Reader USB & Bluetooth
EN 55032:2015 (AC:2016-07) + A11 : 2020 Class B / BS EN 55032: 2015
(AC:2016-07)+A11:2020 Class B Radiated Emission Test EN 55035:2017+A11:2020/
BS EN 55035:2017+A11:2020 EN 61000-4-2:2009/ BS EN 61000-4-2:2009 EN
61000-4-3:2006+A1:2008+A2:2010/ BS EN 61000-4-3:2006+A1:2008+A2:2010 EN
61000-4-8:2010/ BS EN 61000-4-8:2010
PDM REF : 006-000643-001_A / VERSO
POWER ON/OFF THE DEVICE
= ON = OFF
2 sec
CONNECT THE DEVICE
USB-C
or Bluetooth
Touch Key 0 (Menu) Select 2 BLE ON Pairing first time then connection
APPROVE OPERATION
DEVICE INFORMATION
CARD INSERTION CANCEL OPERATION
2 sec
- Only use the USB cable that was supplied with the device and do not transport the device with the USB cable connected. * The reader will switch automatically in USB-C mode once connected and go back to Bluetooth mode when the USB-C cable is removed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>