MASUD TELECOM DHP511 Photo Printer User Manual

MASUD TELECOM DHP511 Photo Printer

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Operating Conditions: Must not cause harmful interference and must accept any received interference
• Modifications: Changes not approved may void the user’s authority
• Antenna: Should be reoriented or relocated if necessary
• Separation: Increase distance between equipment and receiver if needed
• Power Source: Connect equipment to a different outlet or circuit
• Installation: Must not be co-located with other antennas or transmitters
• RF Exposure: Maintain a minimum distance of 20cm between the device and the body

Product Usage Instructions

Compliance with FCC Rules:
Ensure that the device complies with Part 15 of FCC Rules to avoid harmful interference. The device must accept any received interference.

Antenna Placement:
If experiencing interference, reorient or relocate the receiving antenna for optimal reception.

Separation and Connection:
To prevent undesired operation, increase the separation between the equipment and receiver. Connect the equipment to a different outlet or circuit from the receiver.

Consultation:
If further assistance is needed, consult with the dealer or an experienced radio/TV technician for help with setup or troubleshooting.

RF Exposure Guidelines:
For compliance with FCC’s RF Exposure guidelines, maintain a maximum distance of 20cm between the device and your body during operation. Avoid co-locating the device’s antenna(s) with other antennas or transmitters.

Frequently Asked Questions (FAQ):

• Q: What should I do if the device is causing harmful interference?
  A: Reorient or relocate the receiving antenna and increase separation from other equipment to minimize interference.

• Q: How can I ensure compliance with the FCC’s RF Exposure guidelines?
  A: Maintain a minimum distance of 20cm between the device and your body during operation and avoid co-locating the device’s antenna(s) with other antennas or transmitters.

Introduction

Power on and connect

1. Link the Power
   Plug the power adapter into the power port on the back of the printer.

2. Power On
   Press the power button to turn on the printer. When the power indicator is on, the printer automatically enters the state of waiting for Wi-Fi connection, and the power indicator is in white.

3. Printer Connection
   Please contact us for a tribute or to get out of the Twarep program.

Assembling

Ribbon Assembling

1. Open the ribbon cartridge.
2. Insert the new ribbon and clamp it tightly.
3. Close the ribbon cartridge.

Supply the photo paper

1. Open the paper box cover along the top gap.

2. Place photo paper smooth side up in the box.
   Put no more than 20 pieces of paper in the paper box. Do not touch areas within the cut line of the paper. Pull the holder to place the paper more convenient. To ensure print quality, it’s recommended to put only 1 piece of photo paper at one time.

3. Close the box cover.

Paper box assembling

1. Open the box holder.
2. Rotate the box holder down 180° to the bottom.
3. Insert the box into the printer.

Ribbon replacement

1. Open the ribbon cartridge.
2. Push the trigger upward, old ribbon will pop up automatically, take out the old ribbon.
3. Insert a new ribbon, clamp it tightly and close the cartridge.

Operating

Operating position
During the printing, the paper will move back and forth, please ensure that there is more than 10cm space behind the printer.
Tip: Paper goes in and out multiple times.

Storing
When the printer is idle, paper box can be placed on the top of the printer to save space and facilitate storage.

Keys operating instruction

Tip: When settings are restored successfully, all indicators will simultaneously light up and flash for 2 seconds.
When the network is successfully reset, the Wi-Fi indicator lights up and flashes for 2 seconds. During the printing, press or hold the power button, printing will not be interrupted. During firmware upgrading, press or hold the power button, upgrading will not interrupted. When there is a fault, press the power button to shut down, and restart the printer to try to repair the fault automatically. The network can only be reset if the printer is on standby, or fails.

Indicator

Power Indicator

Wi-Fi Indicator Before printing, ensure that the device and printer are connected to the same network, and the Wi-Fi indicator is bright in blue.

SPECIFICATION

• Name: Photo Printer
• Modal: DHP511
• Contained parts: photo printer host, power adapter, operating manual
• Input: 24V=1.6A
• Product size: 205×124.6×85.4mm
• Net weight: 1.3kg
• Input: 24V = 1.6A
• Working temperature: 10°C~35°C

IMPORTANT NOTES

• The best printing temperature of the printer is 10°C~35°C, and the relative humidity is 40%RH-60%RH. If the conditions are not suitable, the print quality may be affected.
• Do not use unofficial ribbons and paper to ensure the quality of the print.
• Do not touch the smooth surface of the photo paper to avoid leaving fingerprints and affecting the print quality.
• When printing, make sure the smooth side of the paper is up, and flat inside the paper box, and insert the paper box on the front of the printer.
• The paper exit can not be blocked, blocking the path of the photo paper will affect the printing effect.
• During the printing, the paper needs to be reciprocated in the printer four times, and after the printing is finished, the paper will be automatically pushed out. Please wait patiently, do not forcibly pull out the paper, so as not to damage the printer.
• The printer uses thermal sublimation printing technology, the print head will be heated during the printing process, and the temperature will continue for some time after the printing is completed. Do not touch the print head to avoid burns.
• It is normal for different printers to have slightly different colours printed on different pieces of paper.
• When not used for a long time, it is recommended to remove the paper box, and close the door of the box, close the box holder and box cover to prevent dust from entering and affecting the printing quality of the first photo.
• When unused photo paper is stored in the machine, it is necessary to avoid storage in high-temperature and humid environments.
• Do not use the original adapter on other devices to avoid damage.
• Do not unplug the power adapter during the upgrade.
• Do use the original adapters, otherwise it will cause printing failure.
• Please avoid printing continuously for a long time.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different. from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Please read this manual carefully before using it and keep it properly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>