moooni L-08 Gold Dining Room Chandelier Modern Rectangle Crystal Chandelier Instruction Manual

moooni L-08 Gold Dining Room Chandelier Modern Rectangle Crystal Chandelier Instruction Manual

Please contact us with following information:

1. Screen shot of your order page, including product picture, name and order ID number.
2. Problem details with pictures / short video if possbile.
   Email: [email protected]

Safety Rules
WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions or situations that may occur. It must be understood that common sense, caution, and care, are factors which cannot be built into any product. These factors must be supplied by the person(s) installing this unit.

READ & SAVE THESE INSTRUCTIONS CAUTION: Before assembling the lighting fixture, refer to the section titled Wiring Connections. If you feel you do not have enough electrical wiring experience, either refer to a do-it-yourself wiring handbook or have your lighting fixture installed by a qualified, licensed electrician.

INSTALLATION & OPERATION INSTRUCTIONS GENERAL Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.

1. Tools You Need

2. Packing List

Note: Glass is fragile and spare parts are included.

3. Mounting and Wiring

4. Hook the Glass

1. Pass the main wires through the downrods, connect the downrods onto the canopy and the fixture frame for a proper length according to your ceiling height.
2. Install Bulbs (E12 x 6, Max 40W each, LED recommended).
3. Attach the glass pieces onto the frame as picture above with screws, plastic washers, and hex nuts provided.

Trouble Shooting

1. Missing / Broken Parts
   · Make a list of the missing/broken parts according to the packing list, take photos for broken parts, then email us for free replacements.

2. Bulbs Do Not Light Up
   · Check your power and switch to make sure it’s power on.
   · Check the bulb to make sure it’s installed correctly.
   · Change a new bulb.
   · Check the wires to make sure they are connected correctly.

3. Bulbs Flicker / Noisy Operation
   · Check the bulb to make sure it’s installed correctly.
   · Change a new bulb.
   · Make sure your bulb is dimmable if you use a dimmer switch.

4. Could Not Install / Assemble
   · Take photos of the ceiling / fixture, contact seller for technical support.

Clean And Care

To clean, wipe fixture with soft cloth. Spray from chemical cleaners can discolour the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

Ordering Parts

Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.

“We followed the light to a brighter and warmer place.”

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>