Riwall RAB 220 Battery Fast Charger Instruction Manual

Riwall RAB 220 Battery Fast Charger

Explanation of the symbols on the equipment

• Read the operating instructions to reduce the risk of inquiry!
• Protect the battery from water and moisture.
• Protect the battery from heat and fire.
• Protect the battery from temperatures above 40 °C.
• Do not dispose of batteries with your domestic waste.

Introduction

MANUFACTURER:
GARLAND distributor, s.r.o. Hradecká 1136, 506 01 Jičín Czech Republic

DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and success.

NOTE:
According to the applicable product liability laws, the manufacturer of the device does not assume liability for damages to the product or damages caused by the product that occurs due to:

• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service technicians,
• Installation and replacement of non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due to the non-compliance of the electric regu-lations and VDE regulations 0100, DIN 57113 /VDE0113.

We recommend:
Read through the complete text in the operating instructions before installing and commissioning the device. The operating instructions are intended to help the user to become familiar with the machine and take advantage of its application possibilities in accordance with the recommendations. The operat- ing instructions contain important information on how to operate the machine safely, professionally and economically, how to avoid danger, costly repairs, re-duce downtimes and how to increase reliability and service life of the machine. In addition to the safety regulations in the operating instructions, you have to meet the applicable regula-tions that apply for the operation of the machine in your country. Keep the operating instructions package with the machine at all times and store it in a plastic cover to protect it from dirt and moisture. Read the instruction manual each time before op-erating the machine and carefully follow its informa-tion. The machine can only be operated by persons who were instructed concerning the operation of the machine and who are informed about the associated dangers. The minimum age requirement must be complied with.

Layout

1. Battery
2. Contacts
3. Battery release button

Scope of delivery

• Open the packaging and remove the device care-fully.
• Remove the packaging material as well as the packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans-port damage.
• If possible, store the packaging until the warranty period has expired.

ATTENTION
The device and packaging materials are not toys! Children must not be allowed to play with plastic bags, film and small parts! There is a risk of swallowing and suffocation!

Safety notices for Li-Ion batteries

WARNING! Read all safety directions and instruc-tions. Omissions in the compliance with safety direc-tions and instructions can cause electrical shock, fire and/or severe injuries. Retain all safety directions and instructions for future use.

• Do not open the battery. Risk of short-circuiting!
• Protect the battery from heat, e.g. from con-stant sun exposure, and from fire, water and humidity. Risk of explosion.
• When the battery has been damaged or it is being used inappropriately, fumes can be re-leased. Let fresh air in and consult a doctor if the fumes cause you any problems. The fumes can irritate the respiratory tract.
• If used incorrectly, liquid may leak from the battery. Avoid contact with this. In the event of accidental contact, rinse off with water. If the liquid gets into eyes, seek medical assistance. Leaking battery fluid may cause skin irritations or burns
• Only use original batteries with the voltage specified on the rating plate of your power tool. If other batteries are used, e.g. imitations, reconditioned batteries or products from third party manufacturers, there is a risk of personal injury as well as property damage based on exploding batteries.
• The battery voltage must correspond with the battery charging voltage of the charger. Oth-erwise, there is a risk of fire and explosion.
• Charge the batteries only in chargers that have been recommended by the manufacturer. There is a risk of fire if a charger for a particular type of battery is used for another type of battery.
• The battery can be damaged by sharp objects such as a nail or screwdriver or by external ap-plication of force. The battery may short-circuit and start burning, smoking, exploding or overheating.

Warning! This electric tool generates an electro-magnetic field during operation. This field can im-pair active or passive medical implants under certain conditions. In order to prevent the risk of serious or deadly injuries, we recommend that persons with medical implants consult with their physician and the manufacturer of the medical implant prior to operating the electric tool.

Intended use

Please note that our equipment has not been de-signed for use in commercial, trade or industri-al applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for equivalent purposes.

Remaining hazards
The machine has been built using modern technology and in accordance with recognized safety rules. Some hazards, however, may still remain.

• Electrical hazards exist when unsuitable electric connections are used.
• Although having regarded all considerable rules there may still remain not obvious remaining hazrds.
• Minimize remaining hazards by following the in-structions in ”Safety Rules”, ”Use only as author-ized” and in the entire operating manual.

Technical data

• Battery type Lithium-Ion
• Nominal voltage 20 V
• Capacity 2 Ah
• Operating temperature 0 – 40 °C
• Weight 0,4 kg
• Charging time ca. 50 min
• Power 40 Wh

Use

Advice for a long battery service life m

CAUTION!

• Never charge batteries below 0 °C or above 40 °C.
• Do not charge batteries in environments with high humidity or high temperatures.
• Do not cover the battery or the charger during charging.
• Disconnect the charger mains plug after charging the battery.

During charging, the battery and the charger will heat up. That is normal. Lithium-ion batteries do not have the known “memory effect”. Nevertheless, a battery should be fully discharged before charging it, and the charging process should always be fully completed.

NOTE

• Follow the battery charging instructions in the user manual for the power tool or the charger.
• Reduced operating durations after charging indi-cate a worn battery. The battery must be replaced.
• If the batteries are not used for a while, store them partly charged in a cool place (10-25 °C).
• Store the battery and the device separately from each other.

Transport

The equivalent lithium content of the batteries includ-ed in the delivery is below specified limits. Therefore, the battery as an individual component, as well as the power tool with its delivery contents, are not sub-ject to national or international hazardous materials regulations. These regulations may become relevant when transporting several devices with lithium-ion batteries, which then require particular safety meas-ures (e.g. for the packaging). In this case, find out about applicable regulations for the country of use.

CAUTION! Do not use batteries with damaged casings.

Disposal and recycling

WARNING!
Do not dispose of batteries in household waste, in fire or water. Do not open worn-out batteries. Batteries should be collected, recycled or disposed of in an environmentally friendly manner. The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equip-ment and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. Ask your dealer or your local council.

Old devices must not be disposed of with house-hold waste!
This symbol indicates that this product must not be disposed of together with domestic waste in compliance with the Directive (2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE). This product must be disposed of at a designated collection point. This can occur, for example, by handing it in at an author-ised collecting point for the recycling of waste elec-trical and electronic equipment. Improper handling of waste equipment may have negative consequenc-es for the environment and human health due to po- tentially hazardous substances that are often con-tained in electrical and electronic equipment.

By properly disposing of this product, you are also contributing to the effective use of natural resources. You can obtain information on collection points for waste equipment from your municipal administration, public waste disposal authority, an authorised body for the disposal of waste electrical and electronic equipment or your waste disposal company. Batteries and rechargeable batteries do not be-long in the household waste! As the consumer you are required by law to bring all batteries and rechargeable batteries, regardless whether they contain harmful sub-stances or not, to a collection point run by the local authority or to a retailer, so that they can be disposed of in an environmentally friendly manner. labelled with: Cd = cadmium, Hg = mercury, Pb = lead

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>