ACTWIND Jk8806-4A Electric Folding Treadmill Instruction Manual

ACTWIND Jk8806-4A Electric Folding Treadmill

Product Information:

Specifications:

• Origin: China
• Model: Not specified

Product Usage Instructions

Running Belt Adjustment:
Running Belt Skews to the Left:

1. Adjust the belt to the middle position by loosening the bolts on one side and tightening them on the other. Allow the belt to run for 1-2 minutes.

Running Belt Skews to the Right:

1. Adjust the belt to the middle position by following the same process as above.

Running Belt Deviates:

1. If the belt deviates to the left, watch the video tutorial at: Video Link
2. If the belt deviates to the right, refer to this video: Video Link

Maintenance:

1. Always disconnect power before cleaning or checking the machine.
2. Clean the belt and dial plate at least once a week after use.
3. Regularly check and tighten screws and spines at fixing points.
4. Avoid hanging clothes or objects on the machine.

Exercise Guide:
Follow the warm-up, training zone exercise, and cool-down routines as recommended for optimal results.

FAQ:

• Q: What should I do if there is no safety key on the panel?
  A: Put the safety key on the panel to ensure safe operation.

• Q: How can I address motor or control board issues?
  A: If there are motor or control board problems, consider lubricating the running belt and checking the motor’s functionality. If necessary, replace the damaged parts.

Thank you very much for purchasing our product. Please read this manual carefully before using it and keep the manual in the proper place.

As shoppers, we’re always trying to find the perfect balance between quality & value. We believe we’ve achieved that. Our diverse catalog of everyday essentials is tailored especially to our customers & guaranteed to hit that sweet spot of high quality & low price.
Always

CAUTION

To avoid injury please read this manual carefully before operating this machine

• For safety, do not stand on the running belt while starting.
• Please stop using immediately if you feel vomiting or jerky during use.
• Please speed up slowly if needed.
• Adjustment of the belt is prohibited during use.
• It is suggested to wear sports shoes and a gym suit while using this equipment.
• Children, the elderly, the pregnant. and patients are prohibited from using this treadmill.
• Please clip the safety key on your clothing during use.
• Please firmly hold the handlebars during use.

SAFETY NOTICE

• Please put the treadmill on the flat ground. It is unsuitable to put the treadmill in the following places:
  • Outdoors. (The treadmill is specially designed for indoor use only).
  • Slant ground or slant places on the balcony.
  • Sunlight area or near heater.
  • Noisy places.
• The proper power for the treadmill is A.C 11 OV.
• The error may appear on the display if the power is not stable. Please do not use the same socket together with the computer, air conditioner etc.
• It is suggested to wear sports shoes and a gym suit while using the treadmill.
• Please speed up or speed down slowly.
• Make sure no child or other objects is near while folding or unfolding the treadmill.
• The treadmill should not be located near water or wet object. Error or damage may be caused if water or other liquids drop into the equipment.

CAUTION DURING USE

Keep both the machine and power cord away from heated surfaces.

• If you do not feel well before using, please consult your doctor or coach.
• Please unplug the equipment when not in use.
• Please unplug the treadmill before cleaning, moving or changing parts for the treadmill.
• Children, the elderly and the pregnant are prohibited from using the treadmill. Patients should consult their doctor before starting any exercise routine.
• Please place the treadmill on a level flat surface. There should be 2M of clearance behind the treadmill.
• Do not start the treadmill when it is folded.
• Keep all electrical components, especially the motor, power cord and plug, away from water or other liquids.
• Do not wear clothes like long dresses, which might catch on any part of the treadmill while using it.
• Do not place the treadmill in an area that will block any vent or air openings.
• Do not put any objects on the treadmill.
• Put away the plug from a heated place or fire seat.
• Please switch off all functions and unplug them after use.
• Do not stand on the belt while you’re preparing to use the treadmill.
• Do not disassemble the treadmill without consulting professional technicians.
• Please make sure the running belt is fastened before using it.

TOOLS REQUIRED

HARDWARE

PRODUCTS MAIN PARTS

1. Cup Holder
2. Console
3. Heart Inductor
4. Safety Key
5. Upright Tube
6. Motor Cover
7. Side Rail
8. Running Belt
9. Mobile Wheel
10. 3-Level Incline
11. End Cap

PARTS

PRODUCT ASSEMBLY

1. Take the treadmill and spare parts out of the carton carefully and gently place them on the ground.
   Lift up the whole panel and tubes.

2. Use Part 3 & Part 4 to fix the back of the tubes; lr’iiill use Part 2 & Part 5 fix the side of the tubes.

3. Check if the connecting wire is connected well and not be damaged/broken. Put the connecting wire into tube in case of being cut by the panel.
   Lay down the panel, use Part 3 & Part 4 to fix the panel to the tubes.
   Insert Part 6 into the incline.

4. Put Part 7 the cup holder into the empty slot of the control panel and clamp it. Put Part 1 to the panel and complete the assembly.

5. Power on and start the treadmill.

FOLDING UP AND SETTING DOWN

FOLD:
NOTE : Ensure the Power Switch is in the ‘OFF’ position and the power cord is unplugged from the electrical outlet.

1. Holding the rear end of deck directly by one hand and then lift the deck up until the Cylinder (A) lifts up into the locked position. Once you hear a sound like ‘click’, the cylinder is in locked position
   Note : Make sure the Cylinder (A) ‘pops’ down into the locked position before moving the treadmill.

2. TO PREVENT ANY INJURY, PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN LIFTING UP OR SETTING DOWN THE DECK.

TECHNICAL SPECIFICATION

BLUETOOTH SETUP

• Turn the treadmill on to make the speakers discoverable to your device under the name: Bluetooth
• On the device you want to pair with the speakers, open Bluetooth Setting (reference device manual to locate), find and select Bluetooth

CONSOLE INSTRUCTION

START / STOP:

• Start:
  In standby mode, Attach the Safety Key correctly, press the “START” key, and the treadmill can start running after a 3 second countdown.

• Stop:
  when exercising, press the “STOP” key or directly disconnect the Safety Key to stop running

KEY FUNCTION

TOTAL 12 PROGRAMS AS BELOW

FUNCTION

• Heart rate measurement
  Hold the heart rate film of the armrest with both hands. The “PULSE” window will display your heart rate value.
  This measurement data is for reference only and cannot be used as medical data

• Dormancy function
  When the treadmill stops running and there is no operation for more than 10 minutes, the system will automatically turn off all displays and enter the sleep mode. Pressing any key will wake it up.

PARAMETER DISPLAY AND SETTING RANGE:

USAGE OF SILICONE OIL

1. Before you start the treadmill, please lubricate the running belt first. Pull up the running belt slightly, and apply silicone oil to the backside of the belt and the top surface of the running deck.
2. Start the treadmill and keep it running for 3 minutes so that the oil spreads and even out. It is necessary to maintain your treadmill every 30 working hours of the treadmill for optimal performance, which also helps extend the service life of parts.

For your convenience, you can scan this QR code to see the video for lubricating the running belt on YouTube or input this link to watch.
https://youtu.be/MksJIoi8Obo

**RUNNING BELT ADJUSTMENT

**

THE RUNNING BELT SKEWS TO THE LEFT

1. Start the machine by speeding at 1.2-1.8mph without loading, and use an Allen wrench to turn the screw 1/4 circle clockwise (see fig 1).
2. Then make the machine run without loading 1-2 minutes. Please Please adjust the belt like this to the middle position.

RUNNING BELT SKEWS TO THE RIGHT

1. Start the machine by a speed at 1.2-1.8mph without loading, use an Allen wrench to turn the screw 1/4 circle clockwise (see fig2).
2. Then make the machine run without loading 1-2 minutes. Please adjust the belt like this to the middle position.

THE RUNNING BELT IS IN THE LOGJAM

1. If the running belt is in dead condition, use an Allen wrench to make the screw 1/2 circle both left and right till this logjam is solved.

THE RUNNING BELT DEVIATE TO LEFT

For your convenience, you can scan this QR code to see the video on YouTube or input this link to watch
https://youtu.be/uoXqZXk1Bx8

RUNNING BELT DEVIATES TO RIGHT

For your convenience, you can scan this QR code to see the video on YouTube or input this link to watch.
https://youtu.be/LGKKCk-yivM

RUNNING BELT LOGJAM

For your convenience, you can scan this QR code to see the video on YouTube or input this link to watch

• STEP1: https://youtu.be/Xqri9ug5J7c
• STEP2: https://youtu.be/nyZ75WFTZZw

DAILY MAINTENANCE

1. Please disconnect power before checking the machine or cleaning.
2. Clear the belt and dial plate after use, at least once a week.
3. Check and tighten screws and spines at fixing point.
4. Do not hang clothes or other objects on the machine.

EPAXERRTCSISE GUIDE

• PLEASE NOTE: Before beginning any exercise program, consult your physician.
• This is important especially if you are over the age of 45 or individuals with pre-existing health problem.
• The pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in determining heart rate trends in general.
• Exercising is great way to control your weight, improving your fitness and reduce the effect of aging and stress.
• The key to success is to make exercise a regular and enjoyable part of your everyday life.
• The condition of your heart and lungs and how efficient they are in delivering oxygen via your blood to your muscles is an important factor to your fitness. Your muscles use this oxygen to provide enough energy for daily activity. This is called aerobic activity. When you are fit, your heart will not have to work so hard. It will pump a lot fewer times per minute, reducing the wear and tear of your heart. So, as you can see, the fitter you are, the healthier and greater you will feel.

Warm-up

Start each workout with 5 to 10 minutes of stretching and some light exercises. A proper warm-up Increase your body temperature, heart rate and circulation in preparation for exercise. Easy into your exercise.

Training Zone Exercise

After warming up, increase the intensity to your desired exercise program. Be sure to maintain your Intensity for maximum performance. Breathe regularly and deeply as you exercise- never hold you breathe.

Cool Down

Finish each workout with a light jog or walk for at least 1 minute. Then complete 5 to 10 minutes of stretching to cool down. This will increase the flexibility of your muscles and will help prevent post-exercise problems.

HEART RATE

THIS IS HOW YOUR PULSE SHOULD BEHAVE DURING GENERAL FITNESS
EXERCISE. REMEMBER TO WARM UP AND COOL DOWN FOR A FEW MINUTES
The most important factor here is the amount of effort you put in. The harder and longer you work the more calories you will burn. Effectively this is the same as if you were training to improve your fitness, the difference is the goal.

TROUBLESHOOTING

If you are not sure about how to do that, please contact our customer service and we will provide the best solution for you.

FCC STATEMENT

NOTE:

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help

FCC Radiation Exposure Statement :

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Dear Sir/Madam:

Thank you for choosing us. Hope you will enjoy our items. Our goal is to provide better quality items and customer service.
Your suggestions and shares about our items and service are really important to both of us and other buyers. We sincerely invite you to go back to our store and leave your thoughts, share and experience. It would be quite encouraging if you could do like this:

WARRANTY

Your purchase includes a hassle-free money-back guarantee and a free replacement exchange for one year. Within the warranty period, we provide FREE replacement parts. If caused by incorrect assembly, incorrect use or change of parts failures, our company takes no responsibility. You should show our products series no. and relative pictures or videos or concern information before getting the warranty.
This treadmill is only for home use, if problems occur by commercial use, our company takes no responsibility.
Great products so far
February 24, 2018
Great product so far. Fast delivery, easy setup, and working without any issues.
With your inspiring rating, we will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>