PET FORGE PF001-WH Spin Fresh Fully Automatic Washing Machine User Manual

PET FORGE PF001-WH Spin Fresh Fully Automatic Washing Machine

Product Information

Specifications

• Product Name: Spin Fresh Fully Automatic Washing Machine
• Model: PF001-WH
• Power: AC 110 V/60Hz
• Color: White

Product Usage Instructions

Safety and Precautions

Basic Precautions

1. Read all instructions before using the appliance.
2. Use this appliance only for its intended purpose as described in the owner’s manual.
3. Properly install the washing machine as per the manual before use.
4. Always follow fabric care instructions from the garment manufacturer.
5. Avoid washing items with flammable substances.
6. Keep children away from the appliance during use.
7. Secure the washing machine lid to prevent children from entering.
8. Avoid reaching into the appliance while it’s in operation.
9. Do not expose the appliance to weather elements or freezing temperatures.
10. Avoid tampering with controls or attempting repairs without professional assistance.

Installation Warnings and Precautions

1. Plug the power cord into an AC 110 V/60Hz wall socket dedicated to the washing machine.
2. Avoid using extension cords, power strips, or transformers to prevent electric shock or fire hazards.
3. Have a qualified technician install the appliance to ensure proper setup.

How To Use

Control Panel
[Describe the control panel features and functions]

Washing a Load of Laundry

1. Sort your laundry by color and fabric type.
2. Add detergent following the manufacturer’s recommendations.
3. Select the desired wash cycle and water temperature on the control panel.
4. Add the laundry to the drum and close the lid securely.
5. Start the washing machine and wait for the cycle to complete.
6. Remove the clean laundry promptly after the cycle ends.

FAQ (Frequently Asked Questions)

• Q: Can I wash delicate fabrics in this washing machine?
  A: Yes, you can wash delicate fabrics by selecting a gentle cycle and using a mild detergent.

• Q: How often should I clean the washing machine?
  A: It is recommended to run a cleaning cycle once a month using a washing machine cleaner to maintain performance and cleanliness.

Safety and Precautions

This manual contains important information on the installation, use, and care of your appliance. Please read this manual carefully before installation and operation of this machine to prevent injury and property damage.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Warnings and Important Safety Instructions in this manual DO NOT cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution and care when installing, maintaining and operating your washing machine.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

WARNING This indicates that hazards or unsafe practices may cause serious personal injury or death.
To reduce the risk of fire, explosion, electric shock, or personal injury when using your washing machine, these basic safety precautions SHOULD be followed.
CAUTION This indicates that hazards or unsafe practices may cause minor personal injury or property damage.

This graphic represents ATTENTION REQUIRED,and detailed cautions will be displayed inside the graphic
This graphic represents OPERATION PROHIBITED, and detailed prohibited items will be displayed inside the graphic 6) .
This graphic represents FORBIDDEN EXECUTION, and detailed forbidden execution items will be displayed inside the graphic e.

Basic Precautions

• WARNING

1. Read all instructions before using the appliance.
2. Use this appliance only for its intended purpose as described in this owner’s manual.
3. Before use, the washing machine must be properly installed as described in this manual.
4. ALWAYS follow the fabric care instructions supplied by the garment manufacturer.
5. Do not wash or spin articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances as they give off vapours that could ignite or explode.
6. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
7. Before the appliance is removed from service or discarded, remove the lid of the washing machine to prevent children from climbing inside and becoming trapped.
8. Do not reach into this appliance if the tub or agitator is moving.
9. Do not install or store this appliance where it will be exposed to the weather or freezing temperatures.
10. Do not tamper with the controls.
11. Do not repair or replace any part of the appliance or attempt any servicing unless it is specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.
12. Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids.
13. Do not place items exposed to cooking oil in your washing machine. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
14. This washing machine is not designed for maritime use or for mobile installations such as in RVs, aircraft, etc.
15. Turn off the water faucets and unplug the washing machine if the machine is to be left for an extended period of time, such as during vacations.
16. Packaging material can be dangerous for children. There is a risk of suffocation! Keep all packaging material away from children.
17. Always check the inside of the washing machine for foreign objects before loading the laundry. Keep the lid closed when not in use.

Installation Warnings and Precautions

• WARNING

1. Plug the power cord into an AC 110 V/60Hz wall socket. Use the socket for this washing machine only.
2. Do not use an extension cord.
  * Sharing a wall socket with other appliances, using a power strip, or extending the power cord may result in electric shock or fire.
  * Do not use an electric transformer. It may result in electric shock or fire.
  * Ensure that the power voltage, frequency, and current match the product’s specifications. Failing to do so may result in electric shock or file.
3. Have this appliance installed by a qualified technician or service company.
  * Failing to do so may result in electric shock, fire, explosion, problems with the product, or injury.
4. Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.
  * Unplug the power plug and clean it with a dry cloth.
  * Failing to do so may result in electric shock or fire.
5. Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.
  * If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire.
6. Plug the power plug into the wall socket firmly. Do not use a damaged power plug, or loose wall socket.
  * This may result in electric shock or fire.
7. Do not pull or excessively bend the power cord.
8. Do not twist or tie the power cord.
9. Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.
  * This may result in electric shock or fire.
10. Do not pull the power cord when unplugging the power plug.
  * Unplug the power plug by holding the plug.
  * Failing to do so may result in electric shock or fire.
11. If the power plug or power cord are damaged, contact your nearest service center.  

• CAUTION
  • Do not install on carpet. Install the washing machine on a level and solid floor that can support its weight.
  • Failing to do so may result in abnormal vibrations, noise, or problems with the product.
  • The washing machine is heavy. Two or more people may be needed to install and move the appliance.
  • Failing to do so may result in bodily or other injuries.
  • Store and install the washing machine where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.
  • Failing to do somay result in serious leak damage.
  • Position the appliance so that the power plug is easily accessible.
  • Failing to do somay result in electric shock or fire due to electric leakage.
  • To reduce the risk of injury to persons, adhere to all industry-recommended safety warnings and precautions.
  • Failing to follow all of the safety warnings in this manual may result in property damage or injury to persons.

Usage and Maintenance Warnings and Precautions

• WARNING

1. If the appliance is flooded, cut the power immediately and contact your nearest service center.
2. If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest service center.
  * Failing to do so may result in electric shock or fire.
3. In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate the area immediately. Do not turn any appliance or light on or off.
  * Do not use a ventilating fan.
  * A spark may result in an explosion or fire.
4. Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol, dry cleaning detergent or other flammable or explosive substances.
  * This may result in electric shock, fire, or an explosion.
5. Do not force the washing machine lid open while the washing machine is operating (high- temperature washing/ drying/ spinning).
  * Water flowing out of the washing machine may cause burns or cause the floor to be slippery. This may result in injury.
  * Forcing the lid open can damage the product or cause injury.
6. Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washing machine before using it.
7. Do not insert your hand or a metal object under the washing machine.
  * This may result in injury or electric shock.
8. Do not attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
  * This may result in electric shock, fire or death.
9. Do not touch the power plug with wet hands.
  * This may result in electric shock.
10. Do not turn the appliance off by unplugging the power plug while the washing machine is in operation.
  * Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire.
11. Keep all packaging material well out of the reach of children and pets, as packaging materials can be dangerous to children and pets.
  * If a child places a bag over their head, they may suffocate.
12. Do not let children or infirm persons use this washing machine unsupervised.
  * Failing to do so may result in electric shock, burns or injury.
13. Do not attempt to repair, disassemble, or modify the appliance yourself.
  * Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.
  * If you need to repair or reinstall the appliance, contact your nearest service center.
  * Failing to do so may result in electric shock, fire, problems with the product, or injury.
14. If any foreign substance such as water enters the appliance in any area other than the tub, unplug the power plug and contact your nearest service center.
  * Failing to do so may result in electric shock or fire.
15. If the water supply hose comes loose from the faucet and floods the appliance, unplug the power plug.
  * Failing to do so may result in electric shock or fire.
16. Do not mix chlorine bleach with ammonia or acids such as vinegar.
  * Incorrect usage can produce poisonous gas, and result in serious injury.
17. Do not reach into the washing machine while parts are moving.  

Before loading, unloading, or adding items, press the START/PAUSE button and allow the agitator to come to complete stop before reaching inside.

  * Failing to do so may result in electric shock, injury or fire.
18. Do not allow children to play on or in the washing machine. Close supervision of children is necessary when the washing machine is used near children. As children grow, teach them the proper, safe use of all appliances.
  * Failing to do so may result in serious injury to persons.
19. Keep laundry products out of children’s reach. Observe all warnings on product labels and abide by them accordingly.
  * Failing to do so may result in serious injury to persons.
20. Disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply.
  * Failing to do so may result in electric shock, injury or fire.
21. Do not clean the appliance by spraying water directly onto it.
22. Do not use benzene, thinner, or alcohol to clean the appliance.
  * This may result in discolouration, deformation, damage, electric shock or fire.

• CAUTION

1. Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm.
  * Failing to do so may result in electric shock or fire.
2. Keep hands and foreign objects clear of the lid when closing the lid.
  * Failing to do so may result in personal injury.
3. If the washing machine is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washing machine with a damp, soft cloth.
  * Failing to do so may result in discoloration, deformation, damage or rust.
4. The lid can be broken by strong impact. Take care when using the washing machine.
  * If any part of the lid is cracked or broken, it may result in injury.
5. After a water supply failure or when reconnecting the water supply hose, open the faucet slowly.
6. Open the faucet slowly after a long period of non-use.
  * The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage.
7. If a drain error occurs during an operation, check if there is a draining problem.
  * If the washing machine is used when it is flooded because of a draining problem, ii may result in electric shock or fire due to electric leakage.
8. Do not insert your hand or a metal object under the washing machine.
  * This may result in injury.  Insert the laundry into the washing machine completely so that laundry does not
9. get caught in the lid.
  * If laundry gets caught in the lid, it may result in damage to the laundry or the washing machine, or result in water leakage.
10. Ensure that the faucet is turned off when the washing machine is not being used.
  * Ensure that the water supply hose connectors are properly tightened.
  * Failing to do so may result in property damage or injury.
11. Open the faucet and check if the water supply hose connector is firmly tightened and that there is no water leaking before using the product.
  * If the water supply hose connectors are loose, it may result in water leakage.
12. Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
  * This may result in electric shock, fire, problems with the product, or injury.
13. Do not operate the appliance with wet hands.
  * This may result in electric shock.  

Do not spray volatile material such as insecticide onto the surface of the appliance.

  * As well as being harmful to humans, it may also result in electric shock, fire, or problems with the product.
14. Do not wash, spin, or dry water-proof seats, mats, or clothing.
  * Do not wash thick, hard mats even if the washing machine mark is on the care label. This may result in injury or damage to the washing machine, walls, floor, or clothing due to abnormal vibrations.
15. Do not operate the washing machine when inner inlet hose is removed
  * This may result in electric shock or injury due to water leakage.
16. Do not place any non-laundry objects, such as shoes, food waste, or animals into the washing machine.
  * This can cause abnormal vibrations that can damage the washing machine, and, in the case of pets, cause severe injury or death.
17. Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
  * This may result in electric shock or injury.
18. Do not wash laundry contaminated by oils, creams, or lotions usually found in skincare shops or massage clinics.
  * This may result in the rubber seal becoming deformed and water leakage.
19. Ensure that the water inlet pipe is connected and the tap is opened before washing clothes.
20. Do not leave metal objects (safety pins, hair pins, etc.) or bleach in the tub for long periods of time.
  * This may cause the tub to rust.
  * If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface and use a sponge to clean it. Never use a metal brush.
21. Do not use hot water from water cooling/heating devices.
  * This may result in problems with the washing machine.
22. Do not use natural hand-washing soap in the washing machine.
  * If it hardens and accumulates inside the washing machine, it may cause problems with the product, discolouration, rust, or bad odors.
23. Do not wash large laundry items such as bedding in the washing tub.
  * Failing to do so may result in injury due to abnormal vibrations.
  * Place smaller items, such as lace socks and lingerie, in a washing machine-safe net prior to washing. (Washing machine-safe net not included with this product.)
24. Do not use hardened detergent.
  * If it accumulates inside the washing machine, it may result in water leakage.
25. Do not wash throw rugs or doormats.
  * If you wash throw rugs or doormats, the sand will accumulate inside the washing machine. It may result in an error code (e.g. no drainage) or product damage.
26. This product is designed only for cold-water washing.
  * Using high-temperature water may result in product damage.

Installation Instructions

Unpacking and Removing Shipping Material
Remove the packing box and lift the washer up and away from the foam base cushion. Open the lid of washer to take out all accessories including protection foam.

WARNING Packaging materials can be dangerous to children; Keep all packaging material (plastic bags, polystyrene, etc.) well out of children’s reach. Do not operate this appliance on the foam base cushion. Failing to do so will result in serious vibration.

Key Parts and Components

Accessories (included)

Tools Needed in Installation (excluded)

Key Dimensions and Specifications

Choose the Proper Location

• Flooring
  For best performance, you must install your washer on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced load situations.

  • Carpeting and soft tile surfaces are contributing factors to vibration which can cause your washer to move slightly during the spin cycle. Do not install your washer in areas where water may freeze, since your washer will always retain some water in its water valve, pump, and hose areas. Frozen water can damage the belts, the pump, hoses, and other components. Never install on a platform or weakly supported structure.

Choose the Proper Location

• Electric
  Use a 110-volt fuse or circuit breaker. An individual circuit serving only your washing machine is recommended.
  WARNING Never use an extension cord.

• Grounding
  Electrical grounding is required for this washing machine. This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric currents. This appliance is equipped with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. An improperly connected equipment-grounding conductor can increase the risk of electrical shock. Check with a qualified electrician or serviceman if you are not sure whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and grounding must
  be done in accordance with the National Electrical Code ANSI/FNPA, No.70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance.
  WARNING: Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

• Water
  To correctly fill your washing machine in the proper amount of time, a water pressure of 14 to 70psi (100 to 500 kPa) is required. Water pressure that is less than 14psi may cause water valve failure, or may not allow the water valve to open completely, or may extend the fill time beyond what your washing machine controls allow, causing your washing machine to turn off and produce an error code. A timer is built into the controls to prevent flooding in your home if a hose becomes loose.
  The water faucet must be within 4 feet (122cm) of the back of your washing machine, per the specifications of the inlet hoses provided with your washing machine.
  To avoid the possibility of water damage:

  • The water faucet must be easily accessible.
  • Turn off the faucet when the washing machine is not in use.
  • Periodically check that there is no leakage from the water inlet hose fittings.

• Drain facility
  The recommended height of the standpipe is 35in. or 90cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose

Install Your Washing Machine
WARNING: Before installing, make sure there are rubber gaskets inside the fittings at both ends of the water supply hoses. If there are no water inlet hoses packed with the washer or if the hoses are damaged, contact kapas serrice center at [email protected]. Installing the water supply hoses without rubber gaskets can cause water leakage. When you initially install the washer,be sure to use new hoses. Failing to do so may result in a water leakage or overflow and may damage your property. If a hose is too short, replace the hose with a longer, high- pressure hose.

• Step 1: Move your washing machine to the selected position
  Tilt the unit back onto its rear rollers and push it forward as shown in the figure below. Move the unit to a location as described in this manual’s Choose the Proper Location section.
  WARNING: Make sure the location has a hard, level surface without carpeting. There should be no direct sunlight. Do not expose the unit to freezing temperatures (under 32° F or 0° C).

• Step 2: Connect water supply hose with washing machine and water faucet.
  First, check if there is a black seal washer in the base of the water supply hose opening. (If there is no black seal washer, do not use the washing machine and contact customer support.) Second, install the water supply hose on the washing machine’s water intake valve. Third, connect the other end of the hose with the water faucet. Only a universal 3/4 threaded connector is provided with this appliance. If you require a different connector, please seek a qualified technician to install a compatible connector to your water faucet.

  1. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a wrench.
     WARNING: When you fasten the fittings, do not fasten them too tightly or apply tape or sealant to the faucets or water supply intakes. This can damage the fittings. After you have connected the water supply hoses to the faucets, ensure that they are connected securely by pulling the water supply hoses downwards.

  2. Place the unconnected ends of the hoses into a bucket and open the faucets connected to the two water supply hoses for 10 or 15 seconds to remove any foreign substances from the hoses. Close the faucets before continuing.

  3. Connect the ends of the water supply hoses to the water supply intake connections at the top of the washer.
     The water hose connected to the COLD faucet must be connected to the cold water supply intake.

  4. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a wrench.
     WARNING: Confirm that the water supply hoses are not twisted or bent. If the hoses are twisted or bent, the hoses can leak and cause electric shock due to the water leakage. To ensure the correct water usage, connect the COLD water faucets.

  5. Turn on the COLD water supplies and check all the water supply intake connections and the faucets for water leaks.

• Step 4: Connect the drain hose
  Position the other end of the drain hose into an appropriate drainage location, such as a functioning sink, toilet, or bath tub.

  • A. Over the edge of a sink.
  • B. In a standpipe Standpipe
  • C. In a standalone laundry tub.
  • D. Bath tub
  • E. Toilet
    WARNING Make sure that the connection between the drain hose and the sink, standpipe, standalone laundry tub, bathtub or toilet is stabilized with a tie strap, hose retainer or hook (not included) to prevent the drain hose from moving or becoming dislodged during water drainage of the washing machine.

• Step 5: Leveling your washing machine
  See if the washing machine is level by checking the position of the tub or using a leveling gauge.

  1. Slide the washing machine into position.
  2. Open the lid of the washing machine.
  3. If the washing machine is level, the agitator is positioned at the center of the washing machine as shown in the figure above right. If not, level your washing machine by turning the front leveling feet clockwise or counterclockwise as necessary.
     WARNING There is ONLY ONE adjustable leg on this washing machine, as shown in the figure on the right.

• Step 6: Powering your washing machine
  Plug the power cord into a 3-prong, appropriately grounded 110 Volt 60Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. Your washing machine is grounded through the third prong of the power cord when plugged into a 3-prong grounded electrical outlet.

• Step 7: Running a test cycle
  Run a test cycle as follows to check if your washing machine is properly installed.

  1. Load laundry into the tub, with load capacity NOT to exceed 7.7 lbs.
  2. Press the Power button to turn on your washing machine.
  3. Press the Start/Pause button to start the test cycle.
  4. The washing machine should not rock or vibrate excessively when water is supplied or when washing or spinning, and should drain well during the spin cycle.
     WARNING If water leaks while water is being supplied or drained, check the water connections. If the washing machine rocks and vibrates excessively, level your washing machine again.

• Step 8: Storing your washing machine
  If you want to store your washing machine, ensure that you unplug it, drain any remaining water from the drain pipe and hook the pipe onto the back of the washing machine. Disconnect the water inlet hose from the faucet and carefully move the washing machine to the storage location.

How To Use

Control Panel

Choose your desired wash cycle program

• Normal: Standard wash cycle for regular fabrics and regular soil level. (45 minutes run time)
• Gentle: Gentle wash cycle for delicate fabrics like silk and items that require special care. (38 minutes run time)
• Spin: Spin cycle that will drain any remaining water in the washing machine tub, and spin the laundry load at high speed. (9 minutes run time)
• Fast: Fast wash cycle for regular fabrics and light soil level. (20 minutes run time)
• Rinse: Rinse and spin cycle (no detergent) for when a laundry load needs to be refreshed without a full wash cycle. (25 minutes run time)
• Soak: Soak and wash cycle for a laundry load with heavy soil level. After the washing machine tub is filled with water, the laundry load will be soaked approximately 10 – 15 minutes before the wash cycle begins. (60 minutes total run time)
• Air dry: Air dry cycle that dries the laundry load without heat, using air temperature. (30 minutes run time.) Multiple air dry cycles may be required, depending on the fabrics and size of the laundry load.
• Water recycle: Provides a recycling opportunity for any relatively clean water after the last rinse of the washing machine. How to use: Before washing, please choose “Water Recycling” function (Note: Only select “Rinse” or “Spin” before selecting “Water Recycling”). Before the washing machine runs until the last spin, the washing machine will give an alarm sound. At this moment, put the drain pipe into a basin and press the pause key to start the operation to recycle the water. (9 minutes_run time)
• Tub self clean: Some environmental and usage conditions can cause a residue to build up in the tub over time and lead to a mildewy or musty smell. The tub clean cycle is specially designed for cleaning the machines. washing machine.
• Soft: Soft cycle for washing wool and other delicate fabrics. (25 minutes run time).

Washing a load of laundry

1. Step 1: Power on your washing machine

2.  Press the Power button to power your wash on

3. Step 2: Load your washing machine tub
   WARNING Before loading your laundry, be sure to take out coins, keys and other hard objects, and close all zippers to prevent the clothes from damage Sort laundry by fabric type, soil level, color and load size as needed. Refer to the Fabric Care Chart in the APPENDIX. You can fill the tub with dry, unfolded clothes, but DO NOT OVERLOAD the tub. Load the tub no more than 3/4 full. To ensure good cleaning results do not overload the tub, especially when washing heavily soiled loads. Never load the tub more than 3/4 full.
   WARNING Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or wrinkling of items in the load.
   Note: To add a forgotten item into the laundry load:

4. Press the START/ PAUSE button to pause the washing machine.

5. Wait for the tub to stop turning, then open the door.

6. Add the item, close the door, and then press the START/PAUSE button. The cycle will resume.

Washing a load of laundry
Put the laundry load and appropriate laundry detergent (depending on the fabric type and size of the load) into the washing machine tub. Close the washing machine lid. Select the desired wash cycle program from the control panel. Press the start/pause button.

Note: To add a forgotten item to the laundry load:

1. Press the start/pause button to pause the washing machine.
2. Wait for the tub to stop turning then open the lid.
3. Add the item, close the Ii d, and then press the start/pause button to resume the wash cycle.

• Cleaning the exterior
  Turn off the water faucet after the wash cycle is complete. This will shut off the water supply to your washing machine and prevent the unlikely possibility of damage from water leakage. Leave the lid open to allow the inside of your washing machine to dry out. Use a soft cloth to wipe off any excess detergent, bleach, or debris. Clean the following as recommended: Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or scrub pads. Do not spray any cleaning solutions directly onto the panel to prevent product damage or electric shock.

• Cleaning the interior
  Clean the interior of your washing machine periodically to remove any dirt, soil, odor, mold, mildew, or bacterial residue that may remain in your washing machine as a result of washing clothes.
  Failure to follow these instructions may result in unpleasant odors and/or permanent stains on your washing machine or laundry. Hard water deposits may be removed, if needed. Use an appropriate cleaning solution that is labeled “Washing machine safe”.

Troubleshooting

Before calling for service
Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems. If your washing machine does not function properly or does not function at all, check the following before you call for service:

machine is probably out of balance. Stop and redistribute wash load. Pause the cycle and redistribute the load.
Vibrating noise| Packaging materials were not removed. Wash load may be unevenly distributed in the tub. Not all leveling feet are resting firmly and evenly on the floor. Floor not rigid enough.| See the UNPACKING AND REMOVING SHIPPING MATERIAL section in the installation instructions.Pause the cycle and redistribute the load.

See Leveling the Washing machine in the Installation Instructions.

Make sure that the floor is solid and does not flex.

See Flooring in the Installation Requirements.

Excessive sudsing| Too much detergent or incorrect detergent.| HE detergents are formulated specifically for High-Efficiency washing machines and contain suds reducing agents. Only Nuse detergent with the High-Efficiency (HE) logo.
Water leaking| Inlet hose connection is loose at faucet or washing machine.

House drain pipes are clogged.

Drain hose has come out of drain or is not inserted far enough.

A large item such as a pillow or blanket is above the top of the tub.

| Check hoses for leaks, cracks and splits.

Check and tighten hose connections. The washing machine pumps out water very rapidly. Check for water backing up out of the drain pipe during drain. If water is seen coming out of the drain, check for proper drain hose installation and check for restrictions in the drain. Contact a plumber to repair drain pipe. Tie drain hose to inlet hose or standpipe to prevent it from coming out during drain. For smaller drain pipes, insert the drain hose into the pipe as far as the drain hose flange. For larger drain pipes, insert the drain hose into the pipe 1-2 in. past the flange.

Stop the washing machine and check the load. Make sure the load does not crest above the top edge of the tub.

Rattling and clanking noise| Foreign objects, such as keys, coins, or safety pins, may be in tub or pump.| Stop washing machine, check tub and drain filter for foreign objects.

If noise continues after washing machine is restarted, call for service.

---|---|---
Wrinkling| Washing machine not unloaded promptly. Washing machine overloaded.
Connect the inlet hose of hot water| Always remove items from the washing machine as soon as the cycle is complete.
The washing machine can be fully loaded, but the tub should not be tightly packed with items.
The lid of the washing machine should close easily.
Hot water rinse can set wrinkles in garments. Check the inlet hose connections
Staining| Washing machine was not unloaded promptly.

Clothes were not properly sorted.

| Always remove items from the washing machine as soon as possible after the cycle is complete. Always wash dark colors separately from light colors and whites to prevent discoloration. Never wash heavily soiled items washed with lightly soiled items.
---|---|---
Wash cycle time is longer than usual| The washing machine automatically adjusts the wash time for the amount of laundry, water pressure and other operating conditions.| This is normal. The washing machine adjusts cycle time automatically to provide optimal results for the selected cycle. The time remaining shown in the display is only an estimate. Actual time may vary.
---|---|---
Musty or mildewy odor in washing machine| Incorrect or too much
detergent has been used .Inside of tub was not cleaned properly.| Use only High-Efficiency (HE) detergent in accordance with the manufacturer’s instructions. Run the tub clean cycle with some bleach.Run the tub clean cycle once a month, or more often under heavy use conditions or if odor is present.
---|---|---
Washing machine will not turn ON| Power cord is not properly plugged in.

House fuse is blown, circuit breaker has tripped, or power outage has occurred.

| Make sure that the plug is plugged securely into a grounded ,3-prong, 120-VAC, 60-Hz outlet.

Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician.

---|---|---
House fuse is blown, circuit breaker has tripped, due to multiple appliances on one outlet.| Reset circuit breaker or replace fuse. If more than one appliance is connected to the outlet, call an electrician to have an additional circuit installed.
Water leaks| Over sudsing of detergent.| Over sudsing may create leaks, and may be caused by the type and amount of detergent used.

High-Efficiency detergent is the only detergent recommended. Make sure that detergent and any additives are put into the correct dispenser compartments.

The normal amount of detergent to use is 1/4 to½ of the maximum amount recommended by the detergent manufacturer. Always reduce the amount of detergent if the load is small or lightly soiled, or if your water bis very soft.

Never use more than the maximum amount recommended by the detergent manufacturer.

Poor stain removal| Previously set stains.| Articles that have previously been washed may have stains that have been set. These stains may be difficult to remove and may require hand washing or pre-treating to aid in stain removal.
Washing machine will not drain water| Kinked drain hose.

Drain located higher than 48 in. above the floor.

| Ensure that the drain hose is not kinked.

Make sure that the drain hose is no higher than 4 ft. above the bottom of the washing machine and is no more than 5 ft. away from the washing machine .

---|---|---
Washing machine will not operate| Water supply is turned off. Control panel has powered off due to inactivity. Washing machine is unplugged.
Controls are not set properly.
Lid is open.
Circuit breaker/fuse is tripped/blown.
Control needs to be reset . START/PAUSE was not pressed after a cycle was set.
Extremely low water pressure.
Washing machine is too cold.
Washing machine is running under Delay start program.| This is normal. Press the POWER button to turn the washing machine on.

Make sure cord is plugged securely into a working outlet.

Make sure the cycle was set correctly, close the lid and press the START/PAUSE button.

The washing machine will not operate if the lid is open. Close the lid and make sure that nothing is caught under the lid preventing it from closing completely.

Check house circuit breakers/fuses. Replace fuses or reset breaker. The washing machine should be on a dedicated branch circuit. Thewashing machine will resume the cycle where it stopped once power is restored.

Press the POWER button, then re-select the desired cycle and press the START/PAUSE button.

Press the POWER button then re-select the desired cycle and press the START/PAUSE button. The washing machine will shut off if the START/PAUSE button is not pressed within ten minutes.

Check another faucet in the house to make sure that household water pressure is adequate.

If the washing machine has been exposed to temperatures below freezing for an extended period of time, allow it to warm up before pressing the POWER button.

Otherwise, the display will not come on.

It’s normal if the unit doesn’t operate under Delay start function. It will start automatically after the delay time is out.

Washing machine not filling properly| Filter clogged.
Inlet hoses may be kinked Insufficient water supply.
The washing machine lid is open.
Inlet Hose not connect Water level is too low.
Water inlet valve damaged.| Disassemble the water inlet hose and clean the inlet point. Check that inlet hoses are not kinked or clogged.
Make sure that both hot and cold water faucets are turned on all the way.
The washing machine will not operate if the lid is open. Close the lid and make sure that nothing is caught under the lid preventing it from closing completely.
Check inlet hose connections. Make sure the cold water supply is connected to the cold inlet valve.
This is a high efficiency washing machine. The water will not normally cover the clothes. The fill level is  ptimized for the wash
motion toachieve thebest wash performance. Call to the service center for service.
---|---|---
Water leaks every load| Hoses not installed correctly.| Check all fill and drain hose connections to ensure that they are tight and secure.

Error Codes

the method of “Cleaning the water inlet”
E2| The drain hose is placed too high; did not lay the drain hose down; the drain hose is wrung or jammed| Check the drain hose, lay the drain hose lowly, press “Start/Pause” button after checking. Open the machine cover and close the machine cover for alarm free
E3| Safety lid is open| Closed the lid
E4| Clothes that are uneven in the tub

cause an imbalance and rub the shell. The washing machine will adjust itself; if it is still unbala need after self-adjusting twice, a warning will be displayed.

| Open the lid, put clothes well, close the lid
E5| Water level up on the highest safety water level| PCB can Auto-precess
E6| Stage frequency less than high

water level limit or exceed than low water level limit, will shows sensor of water lever error alarm

| Please ask a professional person to che
---|---|---
E7| Pause time exceeds 10 minutes| Please press the “start” button
HS| The water recycle program is faulty.| Open and close the cover or press the start button
CH| The indicator shows tub self-clean tips| Please press the “start” button

Warranty

To activate the warranty, please register your product as soon as possible.
Register via website: www.thepetforge.com/pages/support.
Or register by scanning the QR code above with your mobile device.

• Unless a different warranty period is expressly provided with your product, Pet Forge warrants this product for a period of limited 1 year when the product is delivered to you in new condition, in original packaging, from a Pet Forge authorized reseller and used in normal conditions and as described in the user manual – is free from any defects in manufacturing, materials, and workmanship.
• This warranty gives you specific rights and you may also have other rights, which vary from state to state. Pet Forge provides a limited warranty on all eligible Pet Forge products purchased in the United States and Canada.
• The limited warranty covers failures due to defects in material or workmanship on the product. Hoses, washers, and other parts subject to normal wear and tear are not covered under the limited warranty.
• The limited warranty starts from the original date of purchase and is only applicable to the original purchaser of the product.
• Proof of purchase is required to receive any services guaranteed as part of the limited warranty. The limited warranty does not apply to refurbished products or products that were resold by unauthorized resellers.
• The limited warranty does not cover defects found to result from improper or unreasonable use or maintenance of the product, failure to follow warnings and instructions, or unauthorized alterations or modifications to the original product
• The limited warranty does not provide refunds, returns, or exchanges under most conditions. A product replaced under the limited warranty may be replaced with a brand-new or factory-refurbished product. If the defective product is discontinued, end of life, or out of stock, Pet Forge will issue a replacement product of equivalent value or features. Pet Forge warranty periods do not renew with replacement products
• Note that in the event of accidents, injuries, property damage, or death while using a Pet Forge product, insurance coverage is not guaranteed. Check with your insurance provider for more details.

Customer Support
Have an issue? Please don’t return this product. Our friendly customer support staff can help.
Email: [email protected]
Customer support hours: Monday- Friday, 9 A.M. – 5 P.M. U.S. PST Pet Forge is based in California.
Visit www.thepetforge.com to learn more about our products, where to buy them, upcoming news, and special deals and offers.

Recycling

• This symbol on the product or on its packaging indicates that this product (as a whole or in part) cannot be treated as everyday household waste.
• DO NOT dispose of the product OR any of its accessories into the trash or municipal recycling bins. Instead, it should be taken to the appropriate collection point for recycling electric appliances.
• For more information about your local electric waste collection program, contact your local certified electronics recyclers, participating retailers and recyclers in electronics takeback services, or the authorized dealer or retailer from which you purchased your product.

References

• Pet Forge
• Pet Forge

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>