STIEBEL ELTRON 205620 Maw Taps Owner’s Manual
- June 1, 2024
- STIEBEL ELTRON
Table of Contents
STIEBEL ELTRON 205620 Maw Taps
Product Information
Specifications:
- Product Name: MAW TAPS
- Type: Wall mounted mixer tap
- Part Number: 205620
- Surface: Chrome plated
- Connection: 3/8 inch cold water, 1/2 inch spout connection
- Spout Reach: 157 mm
- Flow Rate: 5.2 liters per minute
Product Usage Instructions:
Installation:
- Ensure the area where the tap will be installed is clean and dry.
- Connect the cold water supply to the 3/8 inch connection and the spout to the 1/2 inch connection.
- Mount the tap securely on the wall using appropriate fixtures.
Operation:
- Use the twin levers to control the flow and temperature of the water.
- Adjust the levers as needed to achieve the desired water flow rate and temperature.
Maintenance:
- Regularly clean the tap with a mild soap solution to prevent limescale buildup.
- Check for any leaks or drips and repair them promptly to ensure optimal performance.
FAQ
Q: Can this tap be used with hot water?
A: The MAW tap is designed for cold water connection only. Using it with hot water may damage the tap.
Q: What is the recommended flow rate for this tap?
A: The recommended flow rate for the MAW tap is 5.2 liters per minute.
Technical datasheet
- Type MAW
- Part no. 205620
Technical data
- Application Washbasin
- Installation type Wall mounted mixer tap
- Surface chrome plated
- Connection 3/8 inch
- Cold water connection 1/2 inch
- Spout reach 157 mm
- Flow rate 5.2 l/min
Contact information
You have questions? We appreciate to help you:
Call +49 5531 – 7020
Write an email to [email protected]
Installation information
Please ask your local power supply utility or a registered electrician to install appliances that are not fully wired, i.e. ready to plug in. The electrician should also be able to assist you with obtaining the agreement of the respective power supply utility required for the appliance installation.