Jabra 519003 Wireless Charging Pad User Manual

Jabra 519003 Wireless Charging Pad

• Thanks for choosing us!
• This produci is & TWS headphone noblle plhone wireless charger that allows you enjoy the fun of digital products easily.
• Please kindly reid the user manual before using the product and keep themanual properly for future reference

Specification

• Standard Version: Qi
• Input: DC 5V 2A(max)
• Output: 5
• Frequency: 111.0kHz to 148.0kHz
• Max. Output Power: -10.73dBuA/m @10m (for EU compliance)
• Mode: 519003
• Compatible for: All qi version wireless charging devices
• Charging distance: 2 8 mm
• Conversion rate: 70%
• Output: 5W

Connect to Power Adapter

1. Plug the powr adapter into the socket;
2. Connect the USB A end to the power adapter
3. When the pover is just turned on, the green light of the wireless charging indicator flashes for three times, then the light is off and it is in standby state;
4. When a faul occurs or a foreign object is detected, the red light flashes;
5. When the deice is charging, the indicator light is is steady green; when the device is ful, the indicator light turns from the steady state to the off,
6. Only the Jalra (SV/2A) power adapter can be used;
   Note: This wireess charger is controlled by a smart chip, so it can rest assured for long-tem stndby.

Connect to Laptop

1. Connect end A of the USB power cord to the USB portof the notebook;
2. When the power is just turmed on, the green light of thewireless charging indicator flashes three times, then the light is off and it is in the standby state;
3. When a fault occurs or a foreign object is detected, the ed light flashes;
4. When the device is charging, the indicator light is is steady green; when the device is fiull, the indicator light turns fřom the steady state to theofi,

Connect to Desktop

1. Connect end A of the USB power cord to the USBinter face of the desktop computer motherboard;
2. When the power is just turned on, the green light o the wireless charging indicator flashes three times, then the light is off and it is in the standby state;
3. When a fault occurs or a foreign object is detected, the red light flashes;
4. When the device is charging, the indicator light is is steady grecn; when the device is full, the indicator light turns from the steady state to the off

CHARGING MODE

1. Confirm that the wireless charger is corectly connected to the power supply and nte
2. Place the headphone box/mobile phone with wireless charging function in the cener o
3. Jabra logo position where is the best charging area;
4. When the the indicator light is steady green, the earphone box /mobile phone eners
5. When a fault occurs or a foreign object is detected, the red light flashes. If the eanhou corectly and the red light flashes, please move the earphone box /mobile phone sligitly position; when the device is full, the indicator light tums from the steady state to the off,

Notes:

1. Do not squeeze, crush or disassemble it.
2. Fire or water expOSure will cause high risk of malfunction or circuit issue of the de
3.  Keep it away from hot, humid or corrosive environments to avoid the risk of cicuít damage or electric leakage.
4. Keep the magnetic stripe or chip card (1D card, bank cards, etc.) away from the WL avoid magnetic failure.
5. Keep tje WLC at least zoom in distance to avoid potential interference with the device such as implanted pacemakers, implantable cochlear, etc.
6. The WLC pad is not designed for toy purpose, pls keep the children away to avjid unnecessary accidents.
   The pictures involved in the manual are all schematic diagrams, and the final prodct subject to the actual product.
   Contains: wireless charger pad and user manual.
   The power adapter is not included, please purchase it separately if needed

Special Notice:

1. This device comples with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this ievice may not cause harmful interference, and (2) this device must accept any interterence receitec interference that maycause undesired operation.
   Changes or modificatons not expressly approved by the party responsible for compliance could void the user’s authorityto operate the equipment. This equipment has been tested and found to comply with the limits for a Class device, pursuant to Part 15 of the FCC Rules. These hmits are designed to provide reasonable protection against harmful interterence in a residential installation. This equipment generates, uses and can radiate radio frecue and, if not installed aid used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment dos cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measuresS

   • Reorient or relocate the receiving antenna.
   • Increase the separaion between the equipment and receiver.
   • Connect the equipnent into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help

2. This equipment conplies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This must not be co-locaed or operating in conjunction with any other antenna or transmitter.

3. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

4. This device may rot cause interference.

5. This device must iccept any interference, including interterence that may cause undesired operation of the device.

6. 4.1his equipment complies with IC RSS-I02 radiation exposure limits set forth for an uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your bo
   Hereby, GN Audio A/S declares that the radio equipment type 519003 is in compliance with Directive 2014/53/EU. The ful text of the EU declaration of contormity is available at the following internet address: www.http:\www.jabra.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>