YOHOOLYO P2B 150PSI Portable Air Compressor for Tires Instruction Manual

YOHOOLYO P2B 150PSI Portable Air Compressor for Tires

Thank you for purchasing the YOHOOLYO P2B handheld lithium electric tire inflator! Before using the product for the first time, please read this instruction manual carefully. The YOHOOLYO P2B is the upgraded powerful, efficient 20V tire inflator, which can be adapted for a variety of tasks with its powerful motor and large 10000mAh capacity battery.

Precautions

1. Keep away from heat sources such as open flames.
2. The product will not work, if the real-time tire pressure is greater than the preset tire pressure.
3. Due to the high pressure pumping of the compressor; it will generate heat during the pumping process, please prevent scalding. It is recommended to turn off the product and let it cool for 5 to 10 minutes every 10 minutes of use to prolong the lifespan. Otherwise, it may cause damage to the product.
4. Long-term inactivity of the product may reduce the effectiveness of the battery, please charge it at least every 3 months to maintain its performance.
5. If the product makes unusual noises or gets too hot during inflation, please turn off the product immediately.
6. Before setting the inflation pressure, please make sure that the pressure unit is selected correctly, the mixture of PSI and BAR may cause the danger of over inflation.
7. Please do not overinflate to avoid damage to items that cannot preset the tire pressure values due to low air pressure, such as balloons, toy balls, swimming rings, etc.

Technical Specification

Product Details

1. Handle
2. LCD Screen
3. Switch Button (Power On/Off; Unit Switch)
4. Start/Stop Inflating Button
5. Air Hose Clamp
6. LED Light
7. 20V Rechargeable Battery Pack
8. Air Hose
9. Output Port
10. Input Port
11. French Conversion Mouth
12. Ball Needle
13. Toy Conversion Mouth
14. Type-C Charging Cable
15. Adapter
16. 12V Car Adapter
17. Button For Disassembly

Display Screen

1. Switch Button (Power On/Off; Unit Switch)
2. Button – (decrease value)
3. Button + (increase value)

Function Introductions

1. Screen Display. After connecting the battery or plugging in the car charger, then long press the R button for 2s, the screen will light up. * If you turn off the device by removing the 20v lithium battery pack or the 12v car adapter directly after the pump inflation has completed inflation (which means it is abnormal operation), the digital display screen will automatically light up after the next time you connect the 20v lithium battery pack or the 12v car adapter. 2 If you long press the R button for 5s to turn off the device after the pump inflation has completed inflation (which means it is normal operation) or the device automatically shutdown after 90s standby, you will need to long press the the R button for 2s before the digital display screen turns on after the next time you connect the 20v lithium battery pack or the 12v car adapter.
2. Select Pressure Unit. Short press the R button to set the pressure unit. “+” button to increase,”-” button to decrease value. There are four units for you to choose: psi, bar, kPa, and kg/cm2. We often use the unit “bar”.
3. Preset Pressure Value. There are 4 unit modes, the corresponding preset value is :
   • PSI: 36PSI
   • BAR: 2.5bar
   • KPA: 2.55kg/cm2
   • KG/CM2: 250kpa
4. Start Inflating. After presetting the air pressure value, press the inflating button to start working, and the device will automatically stop working when the preset value is reached.
5. Stop Inflating. When the device is working, you can press the inflating button or the R button (long press for 5s) to immediately stop pumping at any time (if you feel that there may be potential risks of use, such as the actual pressure value exceeds the preset value). Please note that the device will automatically shutdown after 90 seconds standby.
6. Night Lighting. When the LCD screen is on, the LED light will also be turned on synchronously.

Working Mode Of Car Charger

1. Connect the 12v car adapter to the 20V Tire Inflator.
2. Start the car engine.
3. Connect to the car DC 12V outlet.
4. Connect the air hose to the valve core of the tire, and press it to the bottom, then pull down the wrench to lock the air nozzle.
5. Press R button to choose preset unit. “+” button to increase,”-” button to decrease value. Generally, car tire is about 2.2-2.5 bar. Please adjust the air pressure value according to the actual use.
6. Press inflation switch button to start inflation.
7. The device will automatically stop inflating when the preset value is reached. Please remove the air hose and other components in sequence. (Note: the surface of the trachea will be hot, please be careful when disassembling.)

Working Mode Of Lithium Battery

1. Connect the 20V lithium battery pack to the body of the air pump.
2. Connect the air hose to the valve core of the tire, and press it to the bottom, then pull down the wrench to lock the air nozzle.
3. Press R button to choose preset unit. “+” button to increase,”‘” button to decrease value. Generally, car tire is about 2.2-2.5 bar. Please adjust the air pressure value according to the actual use.
4. Press inflation switch button to start inflation.
5. The device will automatically stop inflating when the preset value is reached. Please remove the air hose and other components in sequence.
   (Note: the surface of the trachea will be hot, please be careful when disassembling.)

Note

1. If there’s the tire sizzling and deflating sound, it means that the air nozzle is not clamped in place. You should pull out the air nozzle and reconnect it.
2. After the air nozzle is connected, observe the LCD digital display about testing tire pressure before inflation, to make sure whether the tire needs to be inflated.
3. When inflating, it is not recommended that the continuous working time is more than 10 minutes. Please take it rest for a while.

If you don’t know the tire pressure you want, please refer to the chart below to find the pressure.

Troubleshooting

Safety Precautions

1. Children are prohibited from using this air pump! Keep it in a safe place out of the reach of children! Never insert air tubes into the mouths, ears or eyes of people or animals to inflate, and do not use the air pump as a toy! Keep children a safe distance from the pump when inflating!
2. In order to avoid the loss of car battery, it is recommended to start the car before using this pump, to ensure the normal power supply of battery.
3. The cigarette lighter is equipped with a fuse. If there is a short circuit or the current is too large, the fuse will blow to protect the car battery.
4. The air pump is an electric device, it must be used in accordance with the normal conditions of use. Do not allow the air pump to operate unattended.
5. When cleaning, maintenance or temporarily do not use the pump, please cut off the power supply.
6. When cutting off the power supply, do not directly pull the power cord, you should hold the plastic part of the plug and pull out the plug.
7. Check that the supply voltage must be consistent with the service voltage of the air pump.
8. Do not let the power cord of the air pump pass through sharp objects to avoid damage to the power cord.
9. Do not immerse the air pump in water and avoid getting close to\ heating appliances or exposure to the sun, to avoid fire.
10. Do not drag the power cord to move the pump.
11. The product should avoid moisture, heavy fall and sand intrusion.
12. During the use of the product, if you find any abnormal noise or abnormality, please stop using it immediately and contact our after-sales technical team.
13. For the safety of you and others, please use the air pump and its accessories according to the instructions provided by the manufacturer. Use methods not mentioned in the manual may be dangerous.

FCC Statement

Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Contact

support@yohoolyo.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>