KRC 40550000 Delco 2 Bolt 156mm Alternator Bracket Kit Instructions
- June 3, 2024
- KRC
Table of Contents
40550000 Delco 2 Bolt 156mm Alternator Bracket Kit
Instruction Manual
KRC 40550000 DELCO 2-BOLT 156MM ALTERNATOR BRACKET KIT
Using this exploded view, assemble the alternator and mounting kit with all
bolts, washers, and spacers in their proper position leaving the bolts finger
tight. First, tighten the upper bracket on the water pump, then tighten the
two bolts that attach the lower bracket to the block. Adjust belt tension to
specifications, then tighten the bolts that pass through the alternator.
Note: This kit is designed for our KRC 15101001 water pump with CNC machined
mounting bosses, as well as our serpentine pulley sets. You may have to alter
the water pump spacing, if a different water pump or pulley set is used, to
get proper pulley and belt alignment. Also, mounting bosses on alternators may
vary from manufacturer. Make sure the pulley is parallel with the block. An
optional adapter (KRC 40551000) is required to attach a 156mm 3-bolt
alternator to this kit.