ORDRO G700 4K Digital Video Camera User Manual

June 1, 2024
ordro

ORDRO-logo

ORDRO G700 4K Digital Video Camera

Overview

Thank you for purchasing this portable digital video camera, Various camera modes built-in, up to 64 million camera pixels and 4K video resolution, it has a Sony 1/2.8-inch image sensor, the video file storage usage is small and it has high image quality! You can connect your camera via Wi-Fi using your smartphone remotely, to view the camera’s live screen and use your phone to record or shoot.
Safety Instructions

  • Do not drop, impact or puncture the camera.
  • Do not expose the camera to high/low temperatures, excessive dust, humidity or strong vibration, otherwise, the product may be damaged.
  • Do not use corrosive chemicals or solvents to clean the product.
  • Do not disassemble this camera or attempt to repair or modify it in any manner, if there is any damage to the camera, stop using the camera and return this product to the store where you have purchased it, the product will be sent back to the company and fix.

Cautions

  • Keep children away from the product, accessories and its packaging materials, it may cause suffocation.
  • Do not put the product in a fire, otherwise, it may cause an explosion.
  • Remove the battery if the camera is not going to be used for long periods, and please fully charge the battery before using it again.

Getting to Know Your Camera

Standard Accessories

4K Ultra HD Camera Battery USB Cable
Strap Lens Cap User Manual
  • The above are all accessories, if there is any missing, please contact the seller for replacement.

Charging the Battery

  • Before using the camera, you must load and charge the battery

ORDRO-G700-4K-Digital-Video-Camera-fig-1

  1. Please Connect the USB Cable to the charging adapter when the camera is running low.
  2. Connect the other side to the Camera’s USB charging interface.
  3. The indicator light will be red when charging; The indicator light will turn off when the charging is completed.

Note

  1. For direct charge, please use the 5V/2A charging adapter for charging.
  2. When using the USB Cable to charge, if charged during working conditions, the camera will automatically shut down after the charging adapter is powered off.

Component Introduction

ORDRO-G700-4K-Digital-Video-Camera-fig-2

  • For the function description of the related parts in the above figure, please refer to the following table.
No. Name Function description

1

|

Flash

| It is used to strengthen the exposure volume. It helps to make the scene brighter in a dim place.

Please use it manually.

2| Built-in

Microphone

| Recording sound.

3

|

Focus lamp

| In an environment with insufficient light, the camera’s focusing system is illuminated by the camera, so that the focus system can

accurately focus.

4| Lens| Framing.

5

|

HDMI&USB

interface

| USB: Enter the USB cable charging or connect to the computer.

HDMI: External HD Cable to

connect to TV.

6| Strap Mounting Hole| Install an adjustable strap.

7

|

T/W Zoom Button

| AF (normal mode): When the lens is full, the scene can be pulled into a long distance;

MF (manual mode): manual focus

can be performed when dialling.

8|

Photo Button

| Two-stage button, tap to focus and press to photo in photo mode.
9| DISP Button| Press to switch screen display mode.

10

|

Video Button

| “START/STOP” is the recording/stop button;

Stop playback when the video is

playing.

---|---|---

11

|

Photo Mode Dial

| Carreet AUTO (Intelligent

Scene )/P (Program)/AV (Aperture Priority)/TV (Shutter Priority)

/M(Manual Exposure)/ SCN (scene mode)/

CS (continuous shooting mode)/

CA (Filter Mode) Application mode switching.

12| Power Button| Power On/Off.

13

|

State Light

| When the green light is always on standby.

When the green light is constantly flashing: in the video.

The green light flashed once: take a photo.

When the green light is irregularly flashing: the flash is charging.

When the red light is often on:

charging.

14| Playback Button| Press to enter the playback mode.
15| AE/AF Lock| Lock the current exposure value/focus distance.

16

|

Left Button/AF, MF Button

| When entering the menu list: move left; During the standby interface: select a macro or normal mode AF (automatic Focus)/MF(manual

focus).

17| OK Button| Press the confirmation function when entering the menu list.
18| Up Button/EV| When entering the menu list: move
 | Exposure Button| up; During the standby interface:

enter the EV exposure value adjustment.

---|---|---
19| Right

Button/Flash Button

| When entering the menu list: move right; During the standby interface: enter the flash function selection.
20| Down Button/Self Timer Button| When entering the menu list: move down; During the standby interface: enter the Self Timer selection.
21| Delete Button| Delete the file when the standby mode/playback mode.
22| Menu Button| Press to enter the Menu.
23| Hot shoe interface| Mount hot shoe products.
24| Horn| Plays back sound.
25| IPS Panel| Screen preview and video/photo playback.

26

|

Shutter&MIC Interface

| Shutter interface: access to the dedicated wire controller.

MIC interface: access to external microphones.

Note

  1. When using the flash, please turn on and press the flash button to select the function.
  2. CS (continuous shooting mode) and Video Mode can not use flash.

Getting Started

Inserting an SD Card

  1. Open the cover.
  2. Insert the memory card in the direction shown until you hear“Clicks”.
  3. Close the cover.

Note

  1. When using it for the first time, format the SD card On this unit. The SD card needs to be U3.
  2. Do not forcefully remove the SD card while working, otherwise, it may cause loss of files or machine damage.

Loading Battery

ORDRO-G700-4K-Digital-Video-Camera-fig-4

  1. Open the cover.
  2. inserts a lithium battery.
  3. Close the cover.

Note

  1. Do not violently open the battery compartment and remove the battery.
  2. The battery needs to be loaded into the battery compartment in the correct direction.

Photo/Video Mode

ORDRO-G700-4K-Digital-Video-Camera-fig-5

Photo Mode ISO
Remaining number

of shoots

|

| Aperture and

shutter adjustment

③| Flash state| ⑬| EV exposure
④| Focus lamp| ⑭| Macro mode
⑤| Self Timer| ⑮| Face Detect
⑥| Battery Status| ⑯| AWB
⑦| Video Resolution| ⑰| Metering
⑧| Memory Card| ⑱| Photo quality
⑨| Anti-shake| ⑲| Photo pixel
⑩| External microphone|  |

  1. Press the power button or open the screen to turn on the camera.
  2. Set the option of the function you need by the option setting menu.
  3. Press the photo button lightly to focus, and press the photo button again to take a photo.
  4. Press the “Video button” to start recording.
  5. Press the “Up Button/EV Exposure Button” to pause the recording.
  6. Press the “Video button” again to stop recording.

Photo setting menu


Scene

| Auto/Scenery/Portrait/Sport/Night Portrait/ Night Scenery/Party/Sunset/Backlight/

High Sensitivity

---|---
Resolution| 64M/32M/16M/8M
Quality| Super Fine/Fine/Normal
Metering| Multi/Center/Spot
Grid Line| On/Off
Anti-Shake| On/Off
Date Stamp| On/Off
---|---
Quick

Review

| Off/2 Seconds/5 Seconds
AF Lamp| Auto/Off
AE-L&AF-L| AE-L/AF-L/AE-L&AF-L


Color

| Standard/Color Enhancement(Red)/Color Enhancement(Green)/Color   Enhancement

(Blue)/Color Enhancement(t  Orange)/Color Enhancement(Yellow)/Color Enhancement

(Purple)/Sepia/Monochrome/Pen/Vivid

  1. Press the power button or open the screen to turn on the camera.
  2. Press the “Menu Button” to enter the menu.
  3. Formulate to the place through the “Up Button/EV Exposure Button” or “Down Button/Self Timer Button” you need to function and press the “OK Button” to confirm the selection.

Video setting menu


Resolution

| 4K24fps/2K30fps/1080P60fps/ 1080P30fps/720P60fps
---|---
Date Stamp| On/Off
Time-lapse video| Off/1 Second/3Seconds/ 5 Seconds
Recording Sensitivity| Soft/Normal/Strong

  1. Press the power button or open the screen to turn on the camera.
  2. Press the “Menu Button” to enter the menu.
  3. Press the “Right Button/Flash Button” to the video setting menu.
  4. Formulate to the place through the “Up Button/EV Exposure Button” or “Down Button/Self Timer Button” You need to function and press the “OK Button” to confirm the selection.

Set Menu

Wi-Fi On/Off
Auto Off None/3 Minutes/5 Minutes/10 Minutes
Language English/German/French/Spanish/Italian/

Turkish/Russian/Portuguese/Dutch/ Simplified Chinese/Traditional

Chinese/Polish

Frequency| 50HZ/60HZ
Sound| Power-on sound: Off/3 sounds Shutter sound: On/Off

Operating volume: Four-gear sounds

Set Date| Set Date
Format| Cancel/OK
Default| Cancel/OK
Version| Current firmware version

  1. Press the power button or open the screen to turn on the camera.
  2. Press the “Menu Button” to enter the menu.
  3. Press“Right Button/Flash Button” to the Set menu.
  4. Formulate to the place through the “Up Button/EV Exposure Button” or “Down Button/Self Timer Button” You need to function and press the “OK Button” to confirm the selection.

Play Back

  1. Press the power button or open the screen to turn on the camera.
  2. Press the “Playback Button” to enter the Playback.
  3. Press “Left Button/AF、MF Button” or “Right Button/Flash Button” for the previous or next item.
  4. When you browse the video, press the “OK Button” to start or pause play, press the “Up Button/EV Exposure Button” or “Down Button/Self Timer Button” to adjust the sound, press the “Left Button/AF、MF Button “to rewind, press the”Right Button/Flash Button” to fast-forward, and press the” Video button “to stop playing.
  5. When you browse the photo, press the “T Zoom Button”, and then press the “Up Button/EV Exposure Button”, “Down Button/Self Timer Button” , “Left Button/AF、MF Button” or “Right Button/Flash Button” Make a partial view of the photo, and press the”OK Button”to exit the photo to enlarge.

File delete/protect

  • Press the power button or open the screen to turn on the camera.
  • Press the “Playback Button” to enter the Playback.
  • Press the “Delete Button” and “OK Button” to delete the current browsing file.
  • Press the “Menu Button” to enter the menu:
  • Slide Show: Press the “OK Button” to confirm that the slide show function is selected, and after confirming that “Repeat” and “3S/5S/10S interval” are confirmed in the sub-menu, press “Start” to start the slide.
  • Protect: Press the “OK Button” to confirm the protect function, and confirm the selection of the “Lock”/”Unlock”/”Lock All” or “Unlock All” function in the sub-menu.
  • Delete: Press the “OK Button” to confirm the delete function, and confirm that “Delete Current” or “Delete All ” in the sub -menu.

Note

  1. Press the “Delete button” at the standby interface to directly delete the current file.
  2. The locked file cannot be deleted and must be unlocked manually.

Connecting to the Computer

  • This function allows you to use your camera as an MSDC disk or PC Camera

ORDRO-G700-4K-Digital-Video-Camera-fig-11 MSDC Mode

  1. Press the power button or open the screen to turn on the camera.
  2. Connect the camera and computer with the cable.
  3. The screen will display two options: “MDSC” and “PC Camera”.
  4. Select the “MSDC ” by“OK Button”.

PC Camera

  1. Press the power button or open the screen to turn on the camera.
  2. Connect the camera and computer with the cable.
  3. The screen will display two options: “MDSC “and “PC Camera “.
  4. Select the”PC Camera “by “Down Button/Self Timer Button” and “OK Button “.

Note: When use the camera as a PC Camera, the APP Usingcamera is not able to record video.

APP

Downloading the APP

  • For Android: Search “D Video” in Play Store and download. For IOS: Search “D Video” in the App Store and download. Or scan the QR Code to download the APP.

ORDRO-G700-4K-Digital-Video-Camera-fig-12

Connect Wi-Fi

  1. Press the power button or open the screen to turn on the camera.
  2. Press the “Menu Button” to enter the menu.
  3. Press“Right Button/Flash Button”to the Set menu.
  4. Press the “Up Button/EV Exposure Button” or “Down Button/Self Timer Button and the “OK Button” to confirm the selection and turn on the WiFi function.
  5. Open your phone and open the Wi-Fi search the name with G700xxxxxx, Enter the password: 12345678
  6. Enter the APP, and touch“Connect Camera”.

Note: The Wi-Fi function is a point-to-point wireless connection with a limited distance. The maximum distance is about 7 meters. Please use this function within the effective distance.

ORDRO-G700-4K-Digital-Video-Camera-fig-13

APP Video Mode

  1. Press the on the App user interface to enter the Video mode.
  2. Touch the icon, and “REC” will be displayed at the top right of the interface and flash on the live preview., Start recording.
  3. Touch the icon again, Stop recording.

APP Photo Mode

  1. Press the on the App user interface to enter the Photo mode.
  2. Press the icon in live preview mode,the app will sound “click”.
  3. Finished.

APP Setting

  • This setting function allows you to customize the parameters of the camera, such as the resolution, audio recording, and date
  • Press the on the App user interface to enter the Setting menu.
Video Setting Resolution Select resolution
Photo Setting Photo Size Select resolution
Exposure +3.0/+2.0/+1.0/0.0/

-1.0/-2.0/-3.0

Wi-Fi setting| ID/Password
Format| YES/NO
Default Setting| Cancel/Confirm
Surplus Space| View the storage of

camera

Firmware Version| Camera Version

APP PlayBack

A.Photo

  1. Press the on the App user interface to enter the Play Back mode.
  2. In the main interface of the playback, select “Photo” to enter the thumbnail preview interface.
  3. Select any one of the document thumbnails to play or delete and download the video to local.
  4. After you press to download the photo to the local album, you can share it to social media by clicking .

B.Video

  1. Press the on the App user interface to enter the Play Back mode.
  2. In the main interface of the playback, select “Video” to enter the thumbnail preview interface.
  3. Select any one of the document thumbnails to play or download the video to locally.
  4. By selecting the on the upper right corner to single-select/multi-select video, you can delete or download it to the local album.
  5. After you press to download the photo to the local album, you can share it to social media by clicking .

C. Album

  1. Press on the main interface to enter the local album.
  2. In the main interface of the playback, select “Video” or” Photo” to enter the thumbnail preview interface.
  3. Select any one of the document thumbnails to play , delete or share it to social media by clicking .

Technical Parameters

Sensor 8.0MP CMOS
Aperture F:2.8~3.1
Lens f=4.9~59mm
Focus Range Wide: 0.1m~INF Tele: 1.5m~INF
Lens Type Optical zoom lens
Zoom 12X Optical Zoom 30X Digital Zoom
External Storage Support SD/SDHC Card(U3),Maximum 256GB
--- ---
Screen 3.0-inch IPS Screen

Video Resolution

| 4K :2880*2160 24fps

2K :25601440 30fps FHD:19201080 60fps/1920*1080 30fps

HD:1280*720 60fps

Photo Resolution| 64M(92006900)/32M(64804860)

16M(46083456)/8M(32642448)

File Format| Video:MP4 Photo:JPEG
ISO| Auto/100/200/400/800/1600/3200
Wi-Fi| Support
Flash| Yes
Hot Shoe| Support external mic/LED light
I/O Interface| USB/HDMI/Shutter/MIC
Speaker| Built-in
Microphone| Built-in
Battery| NP120 Li-ion battery
Working Temperature| 0~40 °C

Trouble Shooting

Trouble Possible reason Solution

Cannot power on

| Battery is not inserted correctly/dead| ****

Insert battery correctly/Charge


Unclear Focus

| ****

Out of focus range / lens dirty

| Shooting in focus able range/Clean the lens
Unable to use memory card/unable to record| Card damage / SD card does not meet requirement| Replace the SD card / Format the SD Card / Use the U3 Card


Fail to use it as a PC Cam

| USB Cable is loose / Computer system version is not compatible| Replace the USB interface / Select a compatible system

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitl y approved by manufacturer could void your authority to operate th isequipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operating in conjunction with any other antenna or transmitter. The equipment can be used as portable
exposure without any restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals