ALEX TECHNOLOGY OPENEAR Forte Bone Conduction Sports Headphones User Manual
- June 1, 2024
- ALEX TECHNOLOGY
Table of Contents
ALEX TECHNOLOGY OPENEAR Forte Bone Conduction Sports Headphones
How to Wear
What’s In the Box
Specifications
- Model: OPENEAR Forte
- Type: Bone Conduction Headphones
- BT Version: 5.3
- Frequency: 20Hz- 20kHz
- Connection: 1 Om
- Microphone: -38dB
- Battery: 1 BOmAh
- Play Time: 7.5h(80%volume)
- Charging Time: “”50min
- Charging Voltage: DC 5V
Button Control
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Operations
Power On/Off
- Power On: Press & hold the button + for 3 sec, White and green led flash. Prompt: power on pairing.
- Power Off: Press & hold the button + for 3 sec, green led flash. Prompt: power off .
BT Connection
- Select “OPEN EAR Forte” in BT menu to connect.
- Prompt : connected.
Answer/Hang Up/Reject A Call
- Answer/Hang Up A Call : Click the button MFB once.
- Reject A Call: Double dick the button MFB.
Play/Pause Music
- Click the button MFB once.
Previous/Next Track
- Previous Track: Tripple click the button MFB.
- Next Track: Double click the button MFB.
Volume Up/Down
- Volume Up: Click the button + .
- Volume Down: Click the button – .
Activate Voice Command
- Press and hold the button MFB.
Low Battery
When battery is lower than 20%, prompt: battery low.
Restore Factory Setting
Under power-off mode, press and hold the button + for 10sec.
Charge
Please use DC SV adapter for charging green LED is on charging. white LED is
on after fully charged.
Attentions:
- Listening to loud music for a long time may cause discomfort please use medium volume if possible. Do not use high volume for long periods of time.
- Using headphones will affect your perception of the surrounding environment. Pay more attention when using headphones.
- Do not remove or modify the headphone.as this may cause damage or burn out.
- Do not throw.twist on headphones or put them into a fire.
- Keep it away from fire hydration and high pressure equipment.
- Not suitable for children under 10-year-old containing small parts.
- Do not classify it as household waste. Please send it to the local electrical equipment recycling station.
Note : The company does not assume any responsibility for the loss of personal property caused by the violation of the above warnings.
FCC Warning Statement
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.