JUOVI J5601 Pan Tilt Smart Home Camera User Guide
- June 1, 2024
- JUOVI
Table of Contents
Quick Start Guide
Pan/Tilt Smart Home Camera J5601
Packaging List
J5601 Power Adapter USB Cable
Pack of Screws Quick Start Guide
Mounting Plate Mounting Template
Camera Introduction
-
Status LED
-
Daylight Sensor
-
Lens
-
Mic
-
MicroSD Card Slot
-
Reset Button
-
Speaker
-
Power Port
Set up the Camera
Meaning of the Status LED
| Solid red | Camera is Starting up |
|---|---|
| Blinking green slowly | Waiting for Wi-Fi connection |
| Blinking red and green | Connecting to Wi-Fi |
| Solid green | Connected to the Cloud |
STEP 1 DOWNLOAD APP
Get the JUOVI app from the App Store or Google Play.
STEP 2 Add Device
On the Home screen tap the “+” button in the app and select your camera model.
Mount the Camera
STEP 1
Stick the mounting template onto the wall and drill two holes in two circles.
STEP 2
Insert the plastic expansion tube into the hole and secure the mounting plate
with screws
STEP 3
Align the camera with the mounting plate and rotate it clockwise all the way
Important information
- Do not place the camera near heat or fire sources, such as electric heaters, ovens, fires, candles, and other places that may generate high temperatures
- The operating temperature range of the camera is -10~45°C, please do not use the camera in an environment where the temperature is too high or too low
- Do not use the camera in an environment that is excessively humid or may cause water to enter to avoid damage
- Do not face the camera towards any light source
- Please keep the camera lens free of obstructions, do not point the camera at the glass, this may result in poor image performance
- The camera is not waterproof and is intended for indoor use only
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses a nd can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
CE Statement
EU regulatory conformance
hereby, ZOWEE TECHNOLOGY(HEYUAN) CO., Ltd. declares that the radio equipment
type J5601 in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
www.juovicamera.com
Restrictions in the 5GHz Band:
Frequency band: 5150 – 5250 MHz:
Indoor use: Inside buildings only. Installations and use inside road vehicles
and train carriages are not permitted. Limited outdoor use: If used outdoors,
equipment shall not be attached to a fixed installation or to the external
body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use
by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz
band.
Frequency band: 5250 – 5350 MHz:
Indoor use: Inside buildings only. Installations and use in road vehicles,
trains and aircraft are not permitted. Outdoor use is not permitted.
Frequency band: 5470 – 5725 MHz:
Installations and use in road vehicles, trains and aircraft and use for
unmanned aircraft systems (UAS) are not permitted.
| AT | BE | BG | CH | CY | CZ | DE | DK | EE | EL | ES |
|---|---|---|---|---|---|---|---|---|---|---|
| FI | FR | HR | HU | IE | IS | IT | LI | LT | LU | LV |
| MT | NL | NO | PL | PT | RO | SE | SI | SK | TR | UK(NI） |
Frequency Bands and Power
Frequency bands in which the radio equipment operates: Some bands may not be
available in all countries or all areas. Please contact the local carrier for
more details.
Wi-Fi 2.4GHz: 20 dBm, Wi-Fi 5GHz: 5150-5250 MHz: 20 dBm, 5250-5350 MHz: 18
dBm, 5470-5725 MHz: 19 dBm 5725-5850 MHz10 dBm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>