IKEA JETSTRÖM LED Wall Panel Instruction Manual
- June 1, 2024
- Ikea
Table of Contents
IKEA JETSTRÖM LED Wall Panel
Product Specifications
- Manufacturer: IKEA of Sweden AB
- Maximum Pairing Distance: 5 cm
- Number of Colors with Remote Control: 9
- Number of Colors with Smart Hub and App: 20
- Number of Light Sources per Steering Device: Up to 10
- Compatibility: Only controllable by IKEA Smart lighting products
Product Usage Instructions
Getting Started
- Connect your product to the mains or plug the power cable into the wall socket.
- Ensure the light source is installed and the main power switch is turned on.
- Hold the steering device within 5 cm of the light source you want to pair.
- Press and hold the pairing button on the steering device for at least 10 seconds until a red light shines steadily.
- The light source will dim and flash once to indicate successful pairing.
Note: Disconnect already paired light sources from the main power switch if they are close to each other.
Remote Control
- You can switch between 9 colours and white lights using the remote control.
- For access to 20 colours and white lights, use the IKEA smart hub and IKEA Home smart app.
Care Instructions
- Wipe clean with a damp cloth. Avoid abrasive cleaners or chemical solvents as they may damage the product.
Factory Reset
- If needed, perform a factory reset by inserting a paper clip into the small hole marked RESET and applying slight pressure.
FAQ
- Q: How many light sources can be paired with one steering device?
- A: Up to 10 light sources can be paired with one steering device. Remember to pair them one at a time.
- Q: Can I use standard dimmers with this product?
- A: No, this product should not be used with standard dimmers. It is only controllable by IKEA Smart Lighting products.
- Q: How do I dispose of the product?
- A: The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. Please recycle it according to local environmental regulations.
OVERVIEW
Getting started
Connect your product to the mains or plug the power cable into the wall
socket.
Before you can use your light source you’ll need to pair it with a steering
device.
- Make sure that your light source is installed and the main power switch is turned on.
- Hold the steering device close to the light source you want to add (no more than 5 cm away).
- Press and hold the pairing button for at least 10 seconds. A red light will shine steadily on the steering device. Your light source will begin to dim and finally flash one time to indicate that it has been successfully paired.
Up to 10 light sources can be paired with 1 steering device. Make sure to pair
them one at a time. If the light sources are close to each other, disconnect
those that have already been paired from the main power switch.
With the remote control, you can switch between 9 colours and white lights.
With the IKEA smart hub and the IKEA Home smart app, you get a total of 20
colours and white lights.
If you have the TRÅDFRI gateway or DIRIGERA hub
Go to App Store or Google Play and download the IKEA Home smart app. The app
will take you through the process of installing your product and other
devices.
CAUTION
DO NOT USE WITH STANDARD DIMMERS. This light source will not operate properly
when connected to a standard (incandescent) dimmer or dimming control. Only
controllable by IKEA Smart lighting products.
How to factory reset your product
If the product does not respond or if you want to un-pair the product from a
steering device you might have to make a factory reset. The product is forced
to factory reset by carefully inserting a paper clip end or similar in the
small hole (marked RESET) and applying a slight pressure.
IMPORTANT!
- For indoor use only.
- Do not leave the product in direct sunlight or near any heat source, as it may overheat.
- The declared radio range between the unit and the steering device is measured in the open air.
- Different building materials and placement of the units can affect the wireless connectivity range.
Care Instructions
- Wipe clean with a damp cloth.
- Never use abrasive cleaners or chemical solvents as this can damage the product.
Save these instructions for future use
Technical data
- Type: L2205, L2206 JETSTRÖM
- Input: 220-240 VAC, 9.5W
- Max lumen output: 1150 lm
- Radio range: 10 m in open air.
- Operating frequency: 2405-2480 MHz
- Output power (EIRP): Max 8.5 dBm
- Manufacturer: IKEA of Sweden AB
- Address: Box 702, SE-343 81 Älmhult, SWEDEN
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling under local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
© Inter IKEA Systems B.V. 2023 AA-2416878-2