Altronix PACE1KL Long Range Single Pair Media Adapter Installation Guide

Altronix PACE1KL Long Range Single Pair Media Adapter Installation Guide

Overview:

Pace1KRT is a long-range Ethernet adapter kit that transmits data and power via UTP (2-wire, twisted pair) in a PoE(+) compliant format. Pace1KR receiver is powered via a PoE midspan/endspan, such as the Altronix Netway series. The receiver passes the PoE compliant power over UTP to the Pace1KT transceiver which, in turn, passes this power to an enabled IP camera/device. This plug- and-play, cost-effective solutions facilitate IP devices that need to be installed at distances greater such as in elevator shafts, tunnels, bridges, HVAC, etc. supporting deployments over 1000m.

Features:’

Input (Pace1KR Receiver):

• Powered by midspan or endspan.
  PoE compliant with IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W).

UTP Connection:

• Wire type: 2-wire (UTP).
• Speed: 10Mbps
• Distance: + 1000m, 18/2 AWG @ 10Mbps (see Maximum Length of Cable Type vs.
  Total Power Consumption, pg.3)

Ethernet Connection:

• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e or higher.
• Distance: up to 100m from midspan to Pace1KR receiver (headend), 100m from PaceKT transceiver to device
• Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to device by Pace1KR.
  Power provided by Pace1KR to Pace1KT by PoE protocol.*

LED Indicators:

• Pace1KR and Pace1KT:
  Link LED: Green, PoE Active (left of UTP link)
  Link LED: Green, Active Indicate
  Data transmission (Next to Ethernet link)

• Pace1KR and Pace1KT: (RJ45 jack):
  Yellow and Green LED IP Link status,
  10/100Base-T/active.

Environmental:

• Operating Temperature:
  Pace1KR / Pace1KT: – 40ºC to 75ºC (– 40ºF to 167ºF).

• Storage Temperature: – 40ºC to 75ºC (– 40ºF to 167ºF).

• Relative humidity: 20 to 85%, non-condensing.

Functions:

• Auto detection and protection of legacy non-PoE cameras/devices.

Applications:

• Utilize twisted pairs for new installations or retrofit of IP devices.
• Building Automation, Surveillance & Security.
• Extend Network link distance in an industrial environment over 1000m.
• Works with Megapixel, HD720, HD1080, and VGA (SD) cameras with proper headend equipment.

Mechanical:

• Dimensions (W x L x H approx.):
  Pace1KR and Pace1KT:
  3.8” x 2.5” x 1”
  (96.52mm x 63.5mm x 25.4mm).

Installation Instructions:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire suitable for the application.
Pace1KR and Pace1KT are not intended to be connected to outside plant leads and should be installed indoors within the protected premises. Pace1KR and Pace1KT are intended for indoor use only.

1. Pace1KR installation:
   a. Secure the unit to the desired mounting surface with a proper fastening device utilizing the unit’s mounting hole (Fig. 2a, pg. 3). Unit should be mounted in proximity to the ethernet switch/network, NVR, or video server.
   b. Connect the structured cable from the ethernet midspan or endspan device to the RJ45 jack marked [PoE Input] (Fig. 2, pg. 3).
   c. UTP / 2-wire: Connect UTP to connector marked [+, –] (Fig. 2, pg. 3).

2. Pace1KT installation:
   a. Secure the unit to the desired mounting surface with a proper fastening device utilizing the case’s mounting hole. The unit should be mounted in the proximity of the camera/device.
   b. Connect the structured cable from the IP camera/device to the RJ45 jack marked [PoE Out] (Fig. 2, pg. 3).
   c. Connect UTP to the connector marked [+, –] from receiver (Pace1KR) (Fig. 2, pg. 3).

Technical Specifications:

UTP (2-wire) screw terminals to interconnect receiver/transceiver
Input power
requirements| Midspan or endspan port connected.
PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
Indicators| Yellow (RJ45 connector): On-Link, Off – No Link, Blinking – Activity.
Green (RJ45 connector): On – 100Base-TX, Off – 10Base-T.
Green Link LEDs: Link active
Environmental
Conditions| Operating Ambient Temperature: UL60950-1 Pace1 KR: — 20°C to 49°C (— 4°F to 120.2°F).
Pace1 KT: For 15W: — 40°C to 75°C (— 40°F to 167°F).
For 30W: — 40°C to 49°C (— 40°F to 120°F).
Storage Temperature: — 40°C to 75°C (— 40°F to 167°F).
Relative Humidity: 20 to 85%, non-condensing.
Operating Altitude: — 304.8 to 2,000m.
Regulatory
Compliance| CE European Conformity.
Weights (approx.)| Product: 0.4 lbs. (0.18 kg) I Shipping: 1 lbs. (0.45 kg).

Maximum Length of Cable Type vs. Total Power Consumption:

Wire type| Total Power
Consumption| Max.
Data Distance| Max.
Power Distance
---|---|---|---
18 AWG
(2-wire, UTP)| 7.5W| 1000m (3280 ft)| 1996m (6548ft.)
15W| 1000m (3280 ft)| 998m (3274 Ft.)
30W| 1000m (3280 ft)| 269m (882 ft)
16 AWG
(2-wire, UTP)| 7.5W| 1000m (3280 ft)| 3169m (10396 ft.)
15W| 1000m (3280 ft)| 1584m (5196 ft.)
30W| 1000m (3280 ft)| 427m (1400 ft.)

Note:  Calculations are based on 56VDC starting voltage from the power source and account for a 10VDC voltage drop. IEEE standards voltage range requirements for powered devices are:
PoE (15W) – 37VDC to 57VDC, PoE+ (30W) – 44VDC to 57VDC)

Notes:

Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA
phone: 718-567-8181
fax: 718-567-9056
website:www.altronix.com 
e-mail: info@altronix.com 
Lifetime Warranty
IIPace1KRT Rev. 012121
I07U

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>