NEWMEN KB706 2.4G Receiver User Manual
- June 12, 2024
- NEWMEN
Table of Contents
NEWMEN KB706 2.4G Receiver
2.4G Receiver Manual
Products Profile:
The 2.4G receiver is a wireless device that allows you to connect a
keyboard to your computer without the need for cables. It operates on the
2.4GHz frequency, providing a stable and reliable connection.
Installation Instructions:
- Open your computer.
- Insert the receiver into an available USB interface on your computer.
- The computer will automatically detect the USB device and initiate the installation process.
- Wait for the installation to complete. Once finished, the receiver will be ready for use.
- Open the battery cover of your keyboard.
- Insert the batteries correctly into the keyboard.
- Establish a connection between the keyboard and the receiver. This step may vary depending on the specific model of the keyboard. Please refer to your keyboard’s user manual for detailed instructions on establishing the connection.
Please note that some keyboards may require additional steps or software installation to establish a connection with the receiver. Consult your keyboard’s user manual or manufacturer’s website for specific instructions if needed.
Once the installation and connection are successfully completed, you can start using your wireless keyboard conveniently without any cables.
Products Profile
- Compatible with USB1.1/2.0specifications ,supporting USB-IF and WHQL testing
- 16 channel frequency hopping and Strong anti-jamming capability 3.Support 8*18 matrix ,standard 104/107 Keys ,support 88 Key small keyboard function, Size keyboard sharing receiver
- Support 18 PCS multimedia keys ,and special function keys, support FN+F1-F12 function.
- Support battery low alarm ,support CAPS LOCK ,NUM LOCK indicator light, LED status and host synchronization
- Built – in maintenance mode ,to facilitate the testing and maintenance of defective products
- Support computer hibernation wake up and wake from hibernation
- Wireless remote control distance greater than 10 meters
- Intelligent multi-level power-saving design
- Support keyboard and mouse combo set
Installation Instructions
- Open you computer
- The receiver is inserted into the computer to an idle USB interface,
- the computer will automatically identify the USB device and automatically complete the installation, after the completion of the installation can be used
- Open the keyboard’s battery cover, right into the battery, keyboard and receiver connections use
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits
for a class B digital device,pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. if this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>