metapen ME-MPP702 Surface Pen M2 User Manual

metapen ME-MPP702 Surface Pen M2

Product Information

Package list

1. Meta pen Surface Pen M2 1 User Manual lType-CCable l*PenTip

Compatible devices
Microsoft Surface 3
Microsoft Surface Duo/Duo 2
Microsoft Surface Go/Go 2/Go 3
Microsoft Surface Studio/Studio 2
Microsoft Surface Pro 3/4/5/6/7 /8/X
Microsoft Surface Book/Book 2/Book 3 Microsoft Surface Laptop/Laptop 2/Laptop 3
For more compatible tablet models from HP, ASUS, Lenovo, Acer and etc, please contact us at support@metapen.com

Quick Guide
How to Use?

1. Working mode
   Pick up and slightly shake the stylus to wake up. No need to pair with an APP or Bluetooth.

2. Sleeping Mode
   Automatically enter sleep mode after 5 minutes of inactivity.

3. Hover Mode
   When the tip is close to the screen(<Smm), stylus pen wakes up from sleep mode and a cursor shows on the screen.

4. Replace the tip
   Directly pull out the old pen tip, then insert the new tip until it’s fixed.

LED Indicator Guide

• Charging : LED turns orange
• Fully charged: LED turns white
• Low Battery <lOo/o: LED turns orange and blinking

Warning

1. Choking hazard Small parts. Children should use the device under adult supervision.
2. Built-in non-removable battery, any improper usage may cause battery safety hazards and lead to safety problems.
3. For better protect battery, we recommend not use the stylus pen when charging.
4. We recommend using replacement tips officially manufactured by meta pen.
5. Please use the device with in 0°C ~ 35°C, and store it within -20°C~45°C. Too high or low temperature may cause malfunction.
6. Please charge within 0°C~40°C to avoid battery performance degradation and standby time reduction.
7. Do not use the device in wet places or near strong magnetic fields.
8. Keep the device dry and do not use harsh chemicals, strong cleaning to clean the device. Wipe the device with a clean, dry soft cloth.

If any part of the device is cracked or broken, please stop using it immediately and contact us: support@metapen.com

Specification

Q: Why my stylus pen can’t work with my Microsoft Surt’ace?

1. Please make sure your stylus pen is fully charged(led will turn white) .
2. Make sure your Microsoft Surface is compatible with our M2 stylus.
3. A cursor will show when you hover your pen over the screen.

When charging, use our included Type-C cable and make sure the charger is connected properly. If you still have problems, please don’t worry and feel free to contact us at support@metapen.com (24 Hours Fast Response & 12 months Warranty)

T Correct Disposal of This Product
(Waste Electrical& Electronic Equipment) This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product or their local government office, for details of where and hew they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna-
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/lV technician for help.

Name: Seal!. Mew Accounting Ltd
Address : Electric Avenue Vision 25, London, Enfield EN3 7GD
C ontact Person : Billy Han
E-mail : info@seamew.net

Name: Sea&Mew Consulting GmbH
Address : Mittenhuber Stra11e 4, 92318 Neu markt
Contact Person : Yuan Li
E-mail : Compli,mce.EU@outlook.c:om

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>