metapen M1 Stylus Pen User Manual

Metapen Surface Pen M1
User Manual

M1 Stylus Pen

Please charge 10 minutes before first use.

Packaging List

1 Metapen Surface Pen M1
1 User Manual
1 Type-C Cable
1 Pen Tip

Compatible devices

Microsoft Surface 3
Microsoft Surface Duo/Duo 2
Microsoft Surface Go/Go 2/Go 3
Microsoft Surface Studio/Studio 2
Microsoft Surface Pro 3/4/5/6/7/8/X
Microsoft Surface Book/Book 2/Book 3
Microsoft Surface Laptop/Laptop 2/Laptop 3

• For more compatible tablet models from HP, ASUS, Lenovo, acer etc, please contact us at support@metapen.com

Quick Guide

How to Use?

1. Working mode
   Pick up and slightly shake the stylus or click the key to wake up and ready to use. No need to turn on or pair with an APP or Bluetooth.

2. Sleeping Mode
   Automatically enter sleep mode after 5 minutes of inactivity.

3. Hover mode
   When the tip is close to the screen(<5mm), stylus pen wakes up from sleep mode and a cursor shown on the screen.

4. Replace the tip
   Directly pull out the old pen tip, then insert the new pen tip until it’s fixed.

5. LED Indicator Guide

When charging: LED turns white
Fully charged: LED turns off
Low Battery <10%: LED turns orange and blinking

Specification

Warning

1. Choking hazard – Small parts. Children should use the device under adult supervision.

2. Built-in non-removable battery, any improper usage may cause battery safety hazards and lead to safety problems.

3. For better protect battery, we recommend not use the stylus pen when charging.

4. We recommend using replacement tips officially manufactured by metapen.

5. Please use the device within 5°C~40°C, and store it within -20°C~60°C. Too high or low temperature may cause malfunction.

6. Please charge within 0°C~40°C to avoid battery performance degradation and standby time reduction.

7. Don’t use the device in wet places or near strong magnetic fields. (Not waterproof.)

8. Keep the device dry and do not use harsh chemicals, strong cleaning to clean the device.
   Wipe the device with a clean, dry soft cloth.

9. The pen contains pressure sensors. Do not push pen tip for an extended period of time. Do not subject the pen to shock or vibration.
   If any part of the device is cracked or broken, please stop using it immediately and contact us: support@metapen.com

FAQ

Q: Why my stylus pen can't work with my Microsoft Surface?

1. Please make sure your stylus pen is fully charged (Charging: white LED on, complete charging: LED turns off.) . 2) Make sure your Microsoft Surface is compatible with our M1 stylus. 3) A cursor will show when you hover your pen over the screen.

• When charging, use our included Type-C cable and make sure the charger is connected properly.
  If you still have problems, please don’t worry and feel free to contact us at support@metapen.com
  (24 Hours Fast Response & 12 months Warranty)

**** Correct Disposal of This Product

**** (Waste Electrical& Electronic Equipment) a This Marking shown on the product or its literature, indicate that it should not be MME disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this product or their local government office, for details of where and hew they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.

**** FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to  try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.

Name: Sea&Mew Accounting Ltd
Address: Electric Avenue Vision 25, London, Enfield EN3 7GD
Contact Person: Billy Han
E-mail: info@seamew.net

Name: Sea&Mew Consulting GmbH
Address: Mittenhuber Strake 4, 92318 Neumarkt
Contact Person: Yuan LI
E-mail: Compliance.EU@outlook.com
PN: 7106500160

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>