MAGICSHINE RAY 2100 Front Light User Manual
- June 13, 2024
- MAGICSHINE
Table of Contents
RAY 2100
USER MANUAL
ACCESSORY/STRUCTURE
HOW TO INSTALL
BATTERY INDICATOR
When the device is power-on, the power button light will indicatethe battery
level.
When the device is power-off, short press the power button to activate the
indicator light (light will shut down automatically after 2
seconds).
HOW TO RECHARGE
PHONE CHARGING INSTRUCTION
*External charging cable needs to be purchased additionally
LOCK MODE
To prevent potential damage from high heat or even fire, it is very important
to put the bicycle light in lock mode and protect the switch from being
pressed.
MAGICSHINE will not be held responsible for damages to person or property
resulting from a failure to follow the ‘lock’ mode instructions.
To lock When the light is off, press and hold the power button down for 5
seconds until the indicator light flashes red.
To unlock –
When the light is locked, press and hold down the power button for 5 seconds
until the indicator light constant red.
SWITCHING THE LIGHTING MODE
Hold 1s power button to turn on/off
MODE MEMORY FUNCTION: When you turn the light on, it lights up in the
last lighting mode you used.
MODE SELECTION: In standby mode, press the up/down button at the same
time to enter mode selection. Press the up button to select smart
mode(constant blue) or press the down button to select normal mode(flash
blue).
Press the up/down button at the same time to confirm the selection mode.
SMART MODE-LIGHT SENSOR: The light sensor monitors ambient light to
adjust light output accordingly. During daytime, light’s output automatically
switches to dual beam with 40lumens.When entering a tunnel or shortly after
sun down, light’s output automatically switches to original setting within
seconds.
SMART MODE-VIBRATION SENSOR: An integrated vibration sensor detects the
end of a ride and automatically turns off the light after 3 minutes. Any
further movement will turn the light back on.![MAGICSHINE RAY 2100 Front Light
- fig 6](https://manuals.plus/wp-content/uploads/2023/09/MAGICSHINE-RAY-2100 -Front-Light-fig-6.jpg)
LUMENS/RUN TIME
MODE | BRIGHTNESS | ECO | LOW | MID | HIGH |
---|---|---|---|---|---|
125 | 250 | 500 | 1050 | ||
27:06 | 13:28 | 04:54 | 02:33 | ||
125 | 250 | 500 | 1050 | ||
27:06 | 13:28 | 04:54 | 02:33 | ||
250 | 500 | 1050 | 2100 | ||
13:40 | 07:00 | 02:38 | 01:17 | ||
250 | 250 | / | / | ||
/ | / | / | / |
OPTIONAL PARTS
*Adaptable accessories (sold separately)Don’t cover the light screen when the power is on
WARRANTY
The Magicshine lighting system is warrantied for 24 months from the date of
purchase.
If you register the lighting system on the Magicshine website you will receive
a bonus 6 month warranty.
Battery packs and AC adapters have a 6 month warranty, however, there is no
bonus warranty available.
The warranty is limited to defects in material and workmanship on the lighting
system itself, the battery pack and the AC adapter.
The warranty is only valid if the affected parts have not been tampered with
and there is no intentional damage. Please keep your proof of purchase in a
safe place. Proof of purchase must be presented in the event of any claim.
Please contact the specialist retailer from whom you purchased the device for
complaint or warranty claim.
Alternatively, you can send your complaint or claim directly to Magicshine at
Tel: (+86) 755-295 536 69
Fax: (+86)755-275 897 77
E-mail: support@magicshine.com (order from
Magicshine.com online store)
service@magicshine.com (order from other
sales channels)
In the event of a justified warranty claim and delivery of a replacement
device, you will only be entitled to a model available when replacing.
The manufacturer retains the right to make technical modifications.
ANSI FL 1 STANDARD
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>