QAZQA 106780 IM Paper Vertical Instruction Manual

June 1, 2024
QAZQA

QAZQA 106780 IM Paper Vertical

QAZQA-106780-IM-Paper-Vertical-PRODUCT

Specifications

  • Model: Bert TL Gold 106780
  • Power Supply: 220-240V~ 50Hz
  • Rating: IP20
  • Overall Sizes:
    • Height: 150cm
    • Width: 50cm
    • Depth: 10cm
    • Base Diameter: 20cm
    • Lampshade Diameter: 53cm

Product Usage Instructions

  1. Unpack the lamp carefully, ensuring all parts are included.
  2. Identify a suitable location for the lamp, ensuring it is placed on a stable surface.
  3. Insert the appropriate light bulb according to the recommended wattage.
  4. Connect the lamp to a power source compatible with 220-240V~ 50Hz.
  5. Switch on the lamp using the provided switch or control.
  6. Adjust the lamp position or direction of light as needed for optimal illumination.
  7. Ensure proper maintenance and cleaning of the lamp for longevity.

FAQ

  • Q: Can I use a higher-wattage bulb than recommended?
  • A: It is not recommended to use a higher wattage bulb than specified as it may damage the lamp or pose a safety hazard.
  • Q: How do I clean the lampshade?
  • A: To clean the lampshade, gently wipe it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that may damage the surface.
  • Q: What should I do if the lamp malfunctions?
  • A: If the lamp malfunctions, disconnect it from the power source and consult a qualified technician for repairs or replacements.

Safety Precautions

QAZQA-106780-IM-Paper-Vertical-FIG-3

Installation Instructions

  • Bert TL Gold 106780

QAZQA-106780-IM-Paper-Vertical-FIG-1

Dimensions

Overall Sizes

QAZQA-106780-IM-Paper-Vertical-FIG-2

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product.
Please keep this user manual for further reference.

  1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
  2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
  3. The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
  4. Exterior lighting must not be installed during rain.
  5. Take account of the minimal separation distance from other objects and the room required around the fitting.
  6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
  7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
  8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
  9. Take account of all available technical information.
  10. Meaning of symbols:
    • This icon indicates the level of water-proof and dust-proof
    • Protection Class I: the fitting must be earthed
    • Protection Class II: the fitting is doubled insulated and does not require earthing
    • Protection Class III: the fitting is low-voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltages.
    • The luminaire can be used in combination with a dimmer
    • The luminaire can be dimmed by a wall switch
    • The reference light angle and light space of the luminaire
    • This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste.
  11. Take note of the symbols when connecting wires:

WIRING

  • : Live conductor
  • : Earth conductor
  • : Neutral conductor

CONTACT

FittinQ B.V.

  • Smaragdweg 52, 5527 LB Hapert,
  • The Netherlands
  • www.qazqa.nl

FittinQ LTD

  • 55 Baker Street,
  • London, W1U 7EU
  • United Kingdom

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

QAZQA User Manuals

Related Manuals