QAZQA 106549 Design Wall Lamp Adjustable Instruction Manual
- June 1, 2024
- QAZQA
Table of Contents
QAZQA 106549 Design Wall Lamp Adjustable
Specifications
- Model: Triangolo WL 106547, 106548, 106549
- Input Voltage: 220-240V~
- Frequency: 50Hz
- Socket Type: E27
- Max Wattage: 25W
- IP Rating: IP20
- Manufacturer: FittinQ B.V. and FittinQ LTD
- Dimensions: 12cm x 22cm x 80cm
Product Usage Instructions
- Ensure the input voltage is within the range of 220-240V~.
- Select a suitable E27 bulb with a maximum wattage of 25W.
- Locate the designated area for installation.
- Mount the Triangolo WL securely using the appropriate fixtures.
- Connect the light to a compatible power source.
- Turn on the light using the switch or control mechanism.
Safety Precautions
Overall Sizes
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference.
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably using a switch in the distribution 4. box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- lamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of sumbols.
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- ****protection Class II: the fitting is doubled insulated and does not require earthing
- Protection Class Ill: the fitting is low-voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltages.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by a wall switch
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste
- Take note of the symbols when connecting wires:
Fittin Q B.V.
Smaragdweg 52, 5527 LB Hapert
The Netherlands
www.gazqa.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>