QAZQA 98220 FL Satin Modern Floor Lamp Steel Instruction Manual

QAZQA 98220 FL Satin Modern Floor Lamp Steel

Specifications

• Product Name: Berdien FL Satin 98220
• LED: 6W
• Overall Size: MAX 1630 mm
• Manufacturer: FittinQ B.V.
• Manufacturer Address: Smaragdweg 52, 5527 LB Hapert, The Netherlands
• Manufacturer Website: www.qazqa.nl
• Input Voltage: 220-240V~50Hz
• Color Temperature: 2700 K
• Color Rendering Index (CRI): >80
• Luminous Flux: 600 lm Module, 450 lm Lamp
• LED Module Power: 5.7W
• LED Lamp Power: 6W
• Rated Lifetime: 30,000 hours
• Number of On/Off cycles: 15,000
• Barcode: 8718881095979

Product Usage Instructions

1. Unbox the floor lamp and remove all packaging materials.
2. Place the lamp in the desired location on a flat and stable surface.
3. Plug the lamp into a suitable power outlet with the provided power cord.
4. To turn on the lamp, press and hold the power button for 3 seconds. The lamp will start dimming.
5. To adjust the brightness, continue holding the power button until the desired level is reached.
6. To turn off the lamp, press the power button once.
7. Clean the lamp regularly with a soft, dry cloth to maintain its appearance.

FAQ

• Q: How do I change the LED module in the lamp?
• A: The LED module in this lamp is not user-replaceable. If you encounter any issues with the LED module, please contact the manufacturer for assistance.
• Q: Can I use this lamp outdoors?
• A: This lamp is designed for indoor use only. Using it outdoors may expose it to conditions that could damage the electrical components.
• Q: What should I do if the lamp flickers or does not turn on?
• A: Check the power connection and ensure the power outlet is functioning correctly. If the issue persists, contact a qualified electrician for further assistance.

Safety Precautions

Installation Instructions

Berdien FL Satin 98220

• Hold 3 seconds to start dimming

Dimension

Overall Size

Floor lamp

• incl.LED QL7001035
• 600 lm Module
• 450 lm Lamp
• 5.7W LEDModule
• 6W LED Lamp
• 220-240V~50Hz
• 2700 K
• CRI>80
• 30000 h
• 15000 ON/OFF

(EN) This product contains a light source of energy efficiency class F| QR| EAN
---|---|---

|

8718881095979

• Replaceable (LED only) light source by a professional.
• Replaceable control gear by a professional.

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product.
Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.
10. Meaning of symbols:
    • This icon indicates the level of water-proof and dust-proof
    • Protection Class I: the fitting must be earthed
    • Protection Class Il: the fitting is doubled insulated and does not require earthing
    • Protection Class III: the fitting is low-voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltages.
    • The luminaire can be used in combination with a dimmer
    • The luminaire can be dimmed by a wall switch
    • The reference light angle and light space of the luminaire
    • This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste
11. Take note of the symbols when connecting wires:

WIRING

• : Live conductor
• : Earth conductor
• : Neutral conductor

CONTACT

FittinQ B.V.

• Smaragdweg 52, 5527 LB Hapert,
• The Netherlands
• www.qazqa.nl

FittinQ LTD

• 55 Baker Street,
• London, W1U 7EU
• United Kingdom

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>