Stala ONE-17 Inset Sink Installation Guide

June 1, 2024
Stala

Stala-Logo

Stala ONE-17 Inset Sink

Stala-ONE-17-Inset-Sink-Product

Product Information

Specifications

  • Product: STALA*ONE bowls
  • Types: ONE-17, ONE-34, ONE-40, ONE-50
  • Dimensions:
    • ONE-17: 182 x 397 mm
    • ONE-34: 352 x 397 mm
    • ONE-40: 412 x 397 mm
    • ONE-50: 512 x 397 mm
  • Quantity:
    • ONE-17: 4 pcs
    • ONE-34 / ONE-40 / ONE-50: 8 pcs
  • Material: Waterproofing silicone/glue
  • Websites:

Product Usage Instructions

Installation Instructions for Inset Sink

Note!
When installing the product, handle it with care. Notify any imperfections before installation. Claims for damage after installation will not be accepted.

It may be necessary to notch the partition wall of the cupboard for fixing clips and overflow pieces at the installation place.

  1. Step 1: Prepare the installation area.
  2. Step 2: Apply waterproofing silicone/glue as needed for installation.
  3. Step 3: Notch the partition wall if necessary for fixing clips and overflow pieces.
  4. Step 4: Install the sink carefully in the designated area.
  5. Step 5: Ensure proper alignment and fitting.
  6. Step 6: Secure the sink in place according to the provided instructions.

FAQ

  • Q: Can imperfections in the product be handled after installation?
    A: No, imperfections must be notified before installation. Claims for damage after installation cannot be accepted.

  • Q: How many pieces of fixing clips are required for each bowl type?
    A: ONE-17 requires 4 pcs, while ONE-34, ONE-40, and ONE-50 require 8 pcs each.

Note!

  • When installing the product, handle it with care. Possible imperfections of the product have to be noted before installation.
  • Claims for damage after the sink has been installed cannot be accepted.
  • It may be necessary to notch the partition wall of the cupboard for fixing clips and overflow pieces at the installation place.

What’s In The Box

Stala-ONE-17-Inset-Sink-Fig- \(1\)

Installation

Stala-ONE-17-Inset-Sink-Fig- \(2\)

SINK CUT-OUT FOR BUILT ON
ONE-17 182 x 397 mm
ONE-34 352 x 397 mm
ONE-40 412 x 397 mm
ONE-50 512 x 397 mm

Contact Information

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals