SATECHI ST-ABHF Aluminum Mac Mini Stand with SSD Slot Silver Instructions
- June 6, 2024
- SATECHI
Table of Contents
INSTRUCTIONAL GUIDE
STAND & HUB FOR MAC MINI WITH SSD ENCLOSURE
1. Remove SSD enclosure cover on the bottom of the stand.| 2. To install,
insert the SSD at a slight angle and it should click into place.
Important: Compatible with only M.2 SATA SSD drives.
Does not work with NVMe.
---|---
|
3. Use the included screwdriver and screw to secure the SSD.
To avoid stripping the screw, please do not overtighten.| 4. Put the
enclosure cover back on and flip stand back over.
|
5. Place the stand on a flat surface and use its USB-C cable to connect to
your Mac mini.
Supports Mac mini (2018 & newer)| 6. Connect USB peripherals, SD cards, and
headphones.
USB-A ports do not support charging or CD drives, including Apple SuperDrive.
|
Note: If the SSD is new and not discovered, it may need to be formatted to be read by macOS. To reformat, open Disk Utility > Select the SSD installed
Erase > then select APFS > and then reformat the drive-by erasing it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>