Hanwei SKINDR400 Skin Hydration Detector User Manual
- June 1, 2024
- Hanwei
Table of Contents
Hanwei SKINDR400 Skin Hydration Detector
Product Description This skin hydration detector accurately measures the hydration of your skin to help you understand your skin’s hydration value for better skin care.
- Detection probe
- Protection cover
- TFT display
- Calibration button
- ON/OFF button
- Type-C charging
Product Usage Instructions
Preparation
- Check the battery level:Long press the power on button for 2 seconds to see if the battery is normal. Charge it if the battery icon shows red indicating low battery.
- To ensure accuracy of measurement:
- Power on: Long press the ON/OFF button.
- Check the probe: Remove the protection cover to inspect for any stains on the probe. Clean with alcohol prep pads if necessary.
Caution
- Measure in an area free of trauma and less body hair.
- Calibration: Click the calibration button without touching anything. Clean the probe with alcohol prep pads if calibration fails.
- Mode selection: Click the ON/OFF button to switch between fast mode (1 measurement cycle) and accurate mode (3 measurement cycles).
- Measurement: Place the probe vertically against the skin ensuring full contact. View results after cycles based on selected mode.
- Return to start interface: Click calibration key twice to return to start interface. Brightness adjustment can be done by long pressing calibration button.
- Hydration and oil value levels are categorized into high, medium, and low.
Frequently Asked Questions
What should I do if the device shows low battery? To resolve low battery issue, charge the detector promptly.
How do I clean the measuring probe? Wipe the probe with alcohol prep pads to remove any contamination.
What should I do if I encounter continuous automatic measurement? Ensure the probe is in full contact with the skin and properly pressed into the main unit to stop continuous automatic measurement.
How can I fix slow screen refresh rate issues? If you experience slow screen refresh rate, it may be due to low battery. Charge the detector to resolve this problem.
About the product
This is a skin hydration detector that accurately measures the hydration of
your skin to help you understand your skin’s hydration value for better skin
care.
Product Description
Preparation
-
Check the battery level：Long press the power on button for 2 seconds to see if the battery is normal (the battery icon in the upper right corner of the screen shows red when the battery is low),please charge it if it’s shown low.
-
Check the probe: remove the protection cover to see if there is obvious stains on the probe, if so, clean it with alcohol prep pads.
Caution
- Please measure in an area free of trauma and less body hair;
- To ensure the accuracy of the measurement, please measure refer to the pictures as follow
How to Use
- Power on: Long press the ON/OFF
- Calibration: Click the calibration button without the probe touching anything. If success,it will dispaly ‘Calibration Completed’; if not, please clean the probe with alcohol prep pads
-
Mode selection: Click the ON/OFF button in the start interface can switch between fast mode and accurate mode.
Fast mode:The measurement cycle is 1 time.
Accurate mode: The measurement cycle is 3 times. -
Measurement: Place the probe vertically against the skin, ensuring fully contact. Once the detector detects the biological signal , it will vibrate and automatically start the measurement process. After 2 seconds, it will vibrate again to indicate the end of the measurement cycle. In fast mode, the result can be viewed after a single cycle,while accurate mode requires three cycles. Hydration and oil value levels are categorized into three levels: high, medium, and low.
- Return to the start interface: Click the calibration key twice consecutively in any interface to return to the start interface.
- Brightness Adjustment: Long press the calibration button on the start interface to adjust the screen brightness.
Normal skin reference value hydration value 10%-30%, reference oil value 15-30%, please adjust the skin care method according to the test results in time.
Specification
Measurement Range
| hydration value 0-99％
lipid content 0-65%
---|---
Size
| 45mm×42mm×163
mm
Weight| ≤100g
Battery| 3.7V-400mAh
Working Current| ≤180mA
Operating
Temperature
| 0-45℃，RH≤70%
Storage
Temperature
| -40-70℃，RH≤80%
Fault resolution
| Fault | Cause | Resolution |
|---|---|---|
| Charge | ||
| Low Battery | The | |
| detector |
Boot failure
|
The ON/OFF
| Quickly
click the
| button is| ON/OFF
| stuck| button to
| | make it pop
Continuous Automatic Measureme
nt
| Measuring Probe contaminati
on
| Wipe the probe with alcohol prep
pads.
Unstable Results
| Unsteady Contact or Excessive Force Between Probe and
skin
| Ensure the probe is in full contact with the skin and properly pressed into
the main unit.
Slow screen
refresh rate
|
Low Battery
| Charge the
detector
---|---|---
After-sales maintenance
- We offer a 1-year warranty on our products, which starts from the date of purchase.
- Warranty claims must be submitted to the factory’s after-sales service together with proof of the date of purchase (purchase invoice).
- Even during the warranty period, the following cases are still covered by paid repairs:
- Damage caused by improper use, e.g., using the wrong power supply, plugging the product into an inappropriate outlet, human damage, etc.
- A normal use caused by product aging, wear and tear, but the use of the product’s function has little impact.
- Product problems caused by use for other purposes, or improper operation or non-professional maintenance or use of parts other than those supplied by us.
- Damage caused by force majeure factors (such as lightning, earthquake, fire, flood, etc.).
The test results of this product can not be used as a basis for the diagnosis and treatment of any disease, please follow the doctor’s instructions for the diagnosis and treatment of specific diseases.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
- RF warning for Portable device: The device has been evaluated to me et general RF exposure requirement.T he device can be used in portable exposure condition without restrictio n.
FCC ID:2BFDL-SKINDR400
Shenzhen Hanwei IoT Co., Ltd. Addr: Unit 801, No.10 Lishan Rd., Nanshan, Shenzhen, China
Tel: 18620389878
E-mail: szhwmarket@hanwei.cn
Web：http://www.hwiote.cn
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>