TelForceOne MXWC-03 3 In 1 Wireless Charger Instruction Manual

TelForceOne MXWC-03 3 In 1 Wireless Charger

Thank you

Thank you for purchasing Maxlife product. Before use, please read this manual carefully and keep it for future reference. We hope that Maxlife product will meet your expectations.

PRODUCER/CUSTOMER SERVICE OFFICE

TelForceOne S.A.
Krakowska 119
50-428 Wroclaw
Poland
Phone number : (+48) 71327 20 00
E-mail: info@telforceone.com
Made in China.

WARNINGS AND DIRECTIONS FOR SAFE USE:

• Read the instructions given in the manual carefully. Failure to follow these instructions may be dangerous or illegal.
• Do not turn on the device in areas where the use of electronic devices is prohibited, or when it may cause interference or other hazards.
• The manufacturer is not responsible for damage caused by self-modifications. The same is true if you use cables that do not comply with the parameters of the device.
• The device should not be exposed to water or other liquids. The device should not be used in areas with high humidity. This may adversely affect the operation and life of electronic components.
• The device should not be operated by persons (including children) with limited motor or mental aptitude, or by persons without experience in handling electronic equipment. They may use it only under the supervision of persons responsible for their safety.
• Do not use the device when it bears signs of damage or when you suspect that it is not working properly.
• Packaging can be recycled according to local regulations.
• Always use the device according to its intended use.

CHARGER SUPPORT:

The charger has three charging spots for devices with inductive charging technology.
Each of them is adapted to the individual characteristics of Apple devices. The figure shows the locations by device type.
The charger can be used with other devices, but the magnetic attachment feature will not be functional.

Plug the included USB Type C cable into the port. Connect the other end to a suitable AC adapter.
When the device starts charging, the LEDs will light up blue.
When the charging process is complete, disconnect the charger from the power supply. Do not do anything .,by force”, as this may damage the charger or its power socket.

IMAGE DESCRIPTION/OPIS RYSUNKU:

1. Phone charging point/ Miejsce /adowania telefonu
2. Apple Watch charging point/ Miejsce /adowania Apple Watch
3. AirPods charging point/ Miejsce /adowania AirPods
4. LED/LED
5. USB-C port/Port USB-C
   

WIRELESS CHARGING POWER FOR PHONE/MOC t.ADOWANIA BEZPRZEWODOWEGO DLA TELEFONU

Output power/Moc wyjsciowa: 15W
Wireless charging distance/Dystans tadowania indukcyjnego: <6mm
Wireless chargig efficiency/Sprawnost tadowania bezprzewodowego: ~72%
Frequency range/Zakres cz~stotllwosci: 110-205kHz

WIRELESS CHARGING POWER FOR APPLE WATCH /MOC t.ADOWANIA BEZPRZEWODOWEGO DLA APPLE WATCH

Output power/Moc wyjsciowa: 2W
Wireless charging distance/Dystans tadowania indukcyjnego: <6mm
Wireless chargig efficiency/Sprawnost tadowania bezprzewodowego : ~72%
Frequency range/Zakres cz~stotllwosci: 110-205kHz

WIRELESS CHARGING POWER FOR AIRPODS /MOC t.ADOWANIA BEZPRZEWODOWEGO DLA AIRPODS

Output power/Moc wyjsciowa: 3W
Wireless charging distance/Dystans tadowania indukcyjnego: <6mm
Wireless chargig efficiency/Sprawnosc : tadowania bezprzewodowego: ~72%
Frequency range/Zakres cz~stotliwosci : 110-205kHz

TROUBLESHOOTING:

1. Despite being connected, the charger does not charge the device Check that the power source to which the charger is connected is not damaged.
   Check if the connection cable (USB) is not damaged. If so, use a new cable approved by the manufacturer of the equipment in question.
   Check that the device whose battery is being charged is not damaged.

2. Induction charging does not work
   Check that the maximum distance of inductive charging is not exceeded (for example, by using additional enclosures on the device being charged).
   Check whether the technical parameters of the power source used are compatible with those of the charger.

3. The charger heats up a lot
   It is normal for the charger to heat up. Check that the device whose battery is being charged is not drawing too much power.

If the problem persists, contact the service center.

MAINTENANCE OF THE DEVICE:

Use only a dry and soft cloth to clean the device. Do not use agents with a high concentration of acidic or alkaline.

ATTENTION:

The manufacturer is not responsible for the consequences of situations caused by improper use of the device or failure to follow the recommendations.

PROPER DISPOSAL OF USED EQUIPMENT

 This device is marked with a crossed-out garbage container symbol, in accordance with the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
Products marked with this symbol should not be disposed of or discarded with other household waste at the end of their service life. The user is obliged to dispose of waste electrical and electronic
equipment by delivering it to a designated point, where such hazardous waste is recycled. The collection of this type of waste in separate locations and the proper recovery process contributes to the conservation of natural resources.
 Proper recycling of waste electrical and electronic equipment is benefcial to human health and environment. For information on where and how to dispose of used electronic equipment in an environmentally safe manner, the user should contact the relevant local authority, the collection point orthe point of sale where the equipment was purchased.

DECLARATION OF CONFORMITY WITH EUROPEAN UNION DIRECTIVES

TelForceOne S.A. hereby declares that MXWC-03 is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following web address: https://manual.maxlife.com.pl/

Points de collecte sur www.quefairedemesd&hets.fr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>