XREAL NR-8101AGL Beam Wired Connection Smartphones User Guide

XREAL NR-8101AGL Beam Wired Connection Smartphones

Get to Know XREAL Beam

Plug & Go

• XREAL Beam will start automatically once connected to XREAL AR glasses via USB-C ②.

• Connect power supply to USB-C ① to charge (simultaneous charging and playing supported).

Wired Connection

Connect the smart devices USB-C ①, and cast the screen to your glasses.

Wireless Connection

• Connect your device to the same Wi-Fi network as your XREAL Beam.
• For devices or apps with casting function. Wirelessly cast your screen or app content to XREAL Beam.

Mode Switch

Disclaimer and Safety Warnings

Disclaimer

• Congratulations on purchasing your Xreal Beam. This document sets out important information about using the product safely.
• It is important that you read this document carefully before using or allowing anyone else to use this product. You must comply at all times with the health and safety warnings set out in this document. You must also ensure that anyone you allow to use this product is aware of these health and safety warnings. For the latest product information, please go to www.xreal.c om and visit the official page of this product.
• You and your guest users agree to use this product only for purposes that are in accordance with all applicable laws, rules, and regulations and each of Xreal’s terms, health and safety warnings, precautions, practices, policies and guidelines Xreal has notified to you. XREAL DISCLAIMS ANY AND ALL LIABILITY FOR YOUR FAILURE TO DO SO.
• Xreal limited warranty policy is available at www.xreal.com/support

Safety and Guidelines
To reduce the risk of personal injury, discomfort or property damage, please ensure that all users of the Xreal Beam read the warnings below carefully before using your Xreal Beam.

• WARNING Read the entire Xreal Beamr User Manual to become familiar with the features of this product before using the product. Failure to use this product in a safe and responsible manner could result in injury or damage to the product or other property.
• WARNING This product is not a toy, is not a children’s product, is not designed for children, and is not intended for users under the age of 16.

Recommended Environment For Safe Use

• IMPORTANT You are responsible for creating and maintaining a safe environment during use at all times.
  • The optimal environmental temperature for safe use and storage of this product is 0℃-35℃(32°F-95°F). Avoid using the Xreal Beam in extreme high or extreme low temperature environments as it can cause the product to malfunction or damage the product.
  • Use the Xreal Beam in well-ventilated environments only. Failure to do so can lead to •overheating, which may cause the product to malfunction or damage the product.
  • Xreal Beam Input is 12V-2A, 9V-3A, Output is 5V-1.5A. Only charge the Xreal Beam within this •range.
• WARNING Only use the Xreal Beam in a safe environment. Failure to do so can present hazards that could cause personal injury, death or property damage.
• WARNING When you connect the Xreal Beam with Xreal Air, read the Safety Warnings provided with the Xreal Air first.

Operational Precautions for Safe Use

• IMPORTANT Before using this product for the first time, please carefully inspect it for any visible damage such as cracks or chips. Do NOT use the product if it is damaged or becomes damaged at any time.
• WARNING Keep the product away from fire and heat sources. Overheating can damage the product, or present a burn hazard.
• IMPORTANT Do NOT spray or pour liquid directly on Xreal Beam or expose Xreal Beam to dripping or splashing. To clean, dampen a cloth with a neutral and soft cleaner and wipe down the surface.
• IMPORTANT Do NOT tamper with or insert any sharp or hard objects into the USB-C port. Only use the designated Xreal Air cable with the Xreal Beam USB-C interface.
• IMPORTANT Inappropriate tampering with this product presents an explosion hazard and a risk of injury or property damage. Do NOT disassemble your Xreal Beam. If the Xreal Beam does not function properly (e.g. is not charging), please contact Xreal after-sales service.
• IMPORTANT The product is very sensitive and must not be subjected to strong shocks such as being dropped or collided with other objects.
• IMPORTANT Do NOT place heavy objects on top of the product.
• IMPORTANT Placing the product in microwave ovens, induction cookers, etc. can present an explosion hazard and a risk of injury or property damage.
• IMPORTANT Xreal Beam is NOT a toy for children. Do NOT allow children to use or play with this product. They may injure themselves or others or accidentally damage this product.
• IMPORTANT Please be careful about where you leave the product to avoid pet animals accidentally chewing and damaging the product.
• IMPORTANT When wearing on the Xreal Beam with a lanyard, stay away from hazardous environments such as rotating mechanical spinners, as this may cause injury to people.
• IMPORTANT The Xreal Beam contains radios that emit electromagnetic fields. These electromagnetic fields may interfere with pacemakers, defibrillators and other medical devices. Keep at least 15 centimetres (approximately 6 inches) of separation between your pacemaker or defibrillator and the Xreal Beam. If you suspect the Xreal Beam is interfering with your pacemaker or any other medical device, stop using it and consult your doctor for information specific to your medical device.
• WARNING If your Xreal Beam feels hot to the touch or is uncomfortably warm, stop using immediately, and allow it to cool down. Overheating can damage the product, or present a burn hazard.
• WARNING Do NOT place the product in direct sunlight or near heat sources such as radiators or fires as this may result in overheating. Overheating can damage the product, or present a burn hazard.
• WARNING In order to maintain a long battery life, avoid overcharging. Overcharging can also lead to overheating, which can damage the product or present a burn hazard.
• WARNING Do NOT store the battery for a long time after it has been completely discharged to avoid damage to the cell caused by the battery entering an over-discharged state, and will not be able to resume use.
• WARNING Xreal Beam contains a lithium battery. Please follow the transportation requirements when using it in vehicles, ships, airplanes and other specific applications. For air transportation, please do NOT put Xreal Beam in checked baggage, but in hand luggage.
• WARNING Please dispose of waste lithium batteries in accordance with the relevant regulations on the management of household waste in your area.
• WARNING When connecting wireless earbuds to the Xreal Beam, please turn on audio playback and check the volume before inserting the earbuds into your ears. Listening at high volumes for long periods of time may damage your hearing.
• WARNING The devices comply with the RF specifications when the device is used with a distance of 10mm to the human body. In Japan, according to the Radio Law, the 5GHz band is restricted to indoor use.
• WARNING Observe signs and notices that prohibit or restrict the use of electronic devices. Although Xreal Beam is designed, tested, and manufactured to comply with regulations governing radio frequency emissions, such emissions from Xreal Beam can negatively affect the operation of other electronic equipment, causing them to malfunction. When use is prohibited, such as while traveling in aircraft, or when asked to do so by authorities, please turn off Xreal Beam.

Storage Considerations

1. Do NOT use or store this device in environments below -20°C (-4°F) or above 45°C (113°F). Do NOT expose the Xreal Beam to any liquid. Avoid storing the product in damp, high temperatures, low temperatures or in the rain or snow, which may cause irreparable damage to the product.
2. Do NOT store the product within reach of young children to avoid injury to the child or damage to the product.
3. If you do not use this product for an extended period, please put it in the designated storage box, and store it at room temperature, in a shaded and well-ventilated environment.

For users in the EU & UK

Disposal and Recycling Information
Remember, you shouldn’t throw away waste electrical and electronic products (WEEE) with your normal rubbish. They may contain hazardous substances that are bad for the environment, not to mention human health. If you see this logo, you need to find a local operator that can safely recycle or dispose of your product. Lots of retailers offer in-store ‘take back’ and your local council, municipality or waste disposal provider should have a list of places you can bin your WEEE for free.

[Battery statement]
This product contains a battery. The battery is not designed to be replaceable by users. Battery removal should only be carried out by a qualified professional. Please do not attempt to remove or temper the battery.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

References

• xreal.com/
• xreal.com/support
• xreal.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>