Polaroid Go Instant Camera User Manual

Go Instant Camera

This camera works with
POLAROID GO FLIM
Photography: Harriet Browse
Styling: Agnes Montecinos Muñoz

Polaroid Go  Instant Camera Generation 2

Quick Start Guide

1. Turn on the Polaroid Go camera by pressing the ON/OFF button. The film counter display will show you how many photos you have left.
2. Slide the film door button across and pull the door open.
3. Match the arrows on the film cassette with the arrows indicated in the camera. Slide the thick end of the cassette in first and let it drop into place. Leave the pull tab on as you will need that later to remove the empty film pack.
4. Close the film door until it clicks. The darkslide covered by the film shield will eject.
5. Remove the darkslide and allow the film shield to roll back in.
6. Aim at your subject and press the shutter button. The flash will trigger automatically. Be careful you don’t cover the flash with your finger.
7. Try a selfie. The viewfinder has its own reflective selfie mirror. Place yourself in the middle of it then take the photo.
8. The photo will eject underneath the film shield. Leave it there for 5 seconds. Then gently lift the film shield and let it roll back in. Remove the photo.
9. Don’t shake the photo! Place your photo in a dark place or face down on a flat surface to shield it from light. Follow the development time on the film pack.

Download the complete Polarold Go camera manual.> polaroid.com/go- manual

www.polaroid.com/go-quickstart
Have a problem or question?
Contact our Customer Support Team
USA/Canada
[email protected]
+1-212-219-3254
EU/Rest of World
[email protected]
00800 5770 1500
or visit polaroid.com/help
Made in China for, and distributed by, Polaroid International B.V. 1013 AP,
Amsterdam, The Netherlands. POLAROID, the Color Spectrum, and the
Classic Border Logo are protected trademarks of Polaroid.
©2023 Polaroid. All rights reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>