eurotech Vitra-100 Euroglide Frameless Shower Door Installation Guide
- June 1, 2024
- eurotech
Table of Contents
eurotech Vitra-100 Euroglide Frameless Shower Door
Tools Required
- This product is heavy and may require two people to install.
- Congratulations on your purchase of your Eurotech Shower door, making your shower dreams come to life.
Assembly Drawing
PACKING LIST
PART#
| ****
DESCRIPTION
| ****
Q’TY
| ****
PART#
| ****
DESCRIPTION
| ****
Q’TY
---|---|---|---|---|---
| Wall Bracket| 2pcs| 10| Fixed Panel| 1pc
2| Roller| 2pcs| 11| Bottom Slip-on Seal| 1pc
3| Fixed Panel Holders| 2pcs| 12| Aluminium Water Guard| 1pc
4| Track| 1pc| 13| End Block| 2pcs
5| Safety Bumper| 1pc| 14| Bottom Guide| 1pc
6| Handle| 1pc| 15| Aluminium Bottom U Channel| 1pc
7| VSeal| 1pc| 16| Anti-Lift Pins| 2pcs
8| Door Panel| 1pc| 17| Cushions| Jpcs
9| FSeal| 1pc|
Bar Installation: Mount the wall bracket on the high side of the curb first. Level bar to mark opposite wall for second wall bracket.
Outside door left
Outside door right
Safety Bumper Page
- DO NOT OPERATE DOORS WITHOUT SAFETY BUMPERS AND SEALS PROPERLY INSTALLED
Seal Page
- DO NOT OPERATE DOORS WITHOUT SAFETY BUMPERS AND SEALS PROPERLY INSTALLED
Product Specifications
- Fits 56 to 59-1/4 wide openings
- Overall Heights: 78 or 66 inches
- Bar Cut Formula: overall width minus 1-1/4
- Aluminum Water Guard Cut Formula: centerline of curb width plus 7/16
- Includes: Silicone, Level, Drill, 1/4 Masonry Bit, Phillips Screwdriver, Mallot, Pencil, Tape Measurer, Painters Tape, Allen Wrenches, Bottom Slip-on Seal, Anti-Lift Pins Cushions, Bottom Door Gasket, V Seal, F Seal, Aluminum Water Guard
Product Usage Instructions
Installation Steps
- Measure and mark the center line according to the desired overall height (78 or 66 inches).
- Use the provided tools to drill and install safety bumpers and seals properly.
- Attach the bottom slip-on seal and anti-lift pins cushions to the doors.
- Cut the aluminum water guard according to the formula provided and install it.
- Insert the bottom door gaskets on both sides before hanging the doors.
- Ensure safety bumpers are correctly inserted into wall brackets.
- Verify that all components are properly installed before operating the doors.
FAQ – Frequently Asked Questions
Q: Can the doors be installed in openings wider than 59-1/4 inches?
A: No, the doors are specifically designed to fit openings between 56 and
59-1/4 inches wide. Installing them in wider openings may affect their
functionality.
Q: Do I need any additional tools for installation?
A: No, all necessary tools are included with the product. Make sure to use
them as instructed in the manual for proper installation.